StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Safety Elements in Aircraft Performance - Essay Example

Cite this document
Summary
This paper investigates the various aircraft performance safety elements with specific attention to the take-off and landing stages. The particular performance criteria studied is that of FAR25 with inclusion of conditions, configurations and operating modes…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER93.8% of users find it useful
Safety Elements in Aircraft Performance
Read Text Preview

Extract of sample "Safety Elements in Aircraft Performance"

Safety Elements in Aircraft Performance Introduction: This paper investigates the various aircraft performance safety elements with specific attention to the take-off and landing stages. The particular performance criteria studied is that of FAR25 with inclusion of conditions, configurations and operating modes. Standard performance conditions under study are atmospheric pressure at sea level, ambient air temperature, percent relative humidity and wind velocity (Diamond 1A, General, 2005). These are varied against parametric values of noise levels, take off engine thrusts, approach velocities, etc.

The objective of this exercise is to investigate why, if at all, and by how much, if so, each safety element within the overall aircraft performance criteria affects such safety. Throughout the paper, performance data presented are based on flight tests and have been corrected for the following flight conditions:1. engine thrust ratings less installation losses, airbleed and accessory loads;2. full temperature accountability within the operational limits certified;3. wind accountability as per FAR 25 provisions; 4.

humidity accountability as per FAR 25 provisions; 5. take-off and landing performance based on smooth, dry and surfaced runways;6. the take-off thrust performance data is based on take-off thrust setting instructions as per Diamond 1A, General, 2005. These have been left out because they are not considered germane to this paper's purpose. (Diamond 1A, General, 2005)The paper shall now also include the basis on which the operational factors that have been considered for inclusion of the Diamond 1A, 2005, aircraft performance data, the last having been utilized for the purpose of this paper.1. The maximum demonstrated crosswind component for takeoff and landing is 25 knots.2. Winds for which graphical corrections are available are to be taken as the tower winds (10m above the runway).3. Airplanes under study have been demonstrated to be free of air ingestion up to water depths of 0.

75in with the nose tire pressure 120+/-5psi.4. Performance data has not been determined for wet or icy runway conditions.5. Use sea level performance and power setting airport pressure altitudes below sea level not exceeding -1000ft.6. Percentage increases given for landing distances under ABNORMAL PROCEDURES are in respect to flaps landing distance unless otherwise specified. (Diamond 1A, p. 6.2, 2005)Takeoff Parameters:The paper shall now begin its investigation into the safety elements that enhance aircraft performance.

First, it shall posit the takeoff parametric elements.Takeoff Field Length (TFL):TFL, as determined by the combination of weight, altitude, temperature, wind and runway gradient, has to be taken in maximum in consideration of the following factors:a. 115% of all-engine takeoff distance from brake release to a height of 35ft above runway surface.b. Accelerate-stop distance.c. Distance to attain 35ft above the runway surface with an engine failure at . (Diamond 1A, p. 6.7, 2005)Note: It is noted that the manual points out that the weight limit charts within its ambit does not specify which of the above factors may limit weight under given operating conditions.

Critical Engine Failure Speed:The decision speed - the speed (IAS), after engine failure or any other cause, at which the pilot may elect to stop or takeoff - varies with weight, temperature, altitude, wind, runway gradient, takeoff flap setting, anti-skid availability, and takeoff speed schedule. (Diamond 1A, p. 6.8, 2005)Rotation Speed:The IAS at which airplane rotation is initiated assuming a continued takeoff after engine failure . When it is assumed that, under these conditions, the airplane is rotated at nose up body altitude at it will reach a speed of before a height of 35ft is attained the rotation speed will vary with weight, altitude, temperature, takeoff flap setting, and takeoff speed schedule.

(Diamond 1A, p. 6.8, 2005)Airborne Speed:The speed at which the aircraft first becomes airborne. (Diamond 1A, p. 6.8, 2005)Takeoff Safety Speed:This is the actual speed attained at 35ft above runway surface with engine failure at and the airplane rotated at and where it is assumed that will always be at least 1.2 the takeoff safety speed varies with weight, takeoff flap setting and takeoff speed schedule. (Diamond 1A, p. 6.8, 2005)Note: The values of , and correspond to particular takeoff configurations, runway and ambient conditions.

The takeoff speed schedules have been provided based on the following:a. Flaps takeoffb. Flaps takeoffc. Flaps increased takeoff speed schedule up to 9% speed increase when TOFL is not limited by runway length, brake energy or obstacle clearance.d. Schedules b. and c. of above are combined in the chart presentations. The capacity of the braking system for absorption of airplane energy has limits imposed in the chart system wherever applicable. (Diamond 1A, p. 6.8, 2005) Accelerate-Stop Distance:This is the distance that is required to accelerate at speed using both engines and then bring the airplane to a complete stop using the ENGINE FAILURE DURING TAKEOFF (below ) procedure.

(Diamond 1A, p. 6.9, 2005)Rejected Takeoff:This is the same as the accelerate-stop procedure. (Diamond 1A, p. 6.9, 2005)Appendix:List of Abbreviations:IAS = Indicated airspeed - Airspeed indicator reading. = Stall speed - the minimum speed that results when recovery is initiated at buffet onset with engines idling. Actual stalling speeds vary with weight, configuration, center of gravity, location, bank angle, g load and power setting.

Read More
Tags
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Safety Elements in Aircraft Performance Essay Example | Topics and Well Written Essays - 500 words”, n.d.)
Safety Elements in Aircraft Performance Essay Example | Topics and Well Written Essays - 500 words. Retrieved from https://studentshare.org/miscellaneous/1519275-safety-elements-in-aircraft-performance
(Safety Elements in Aircraft Performance Essay Example | Topics and Well Written Essays - 500 Words)
Safety Elements in Aircraft Performance Essay Example | Topics and Well Written Essays - 500 Words. https://studentshare.org/miscellaneous/1519275-safety-elements-in-aircraft-performance.
“Safety Elements in Aircraft Performance Essay Example | Topics and Well Written Essays - 500 Words”, n.d. https://studentshare.org/miscellaneous/1519275-safety-elements-in-aircraft-performance.
  • Cited: 0 times

CHECK THESE SAMPLES OF Safety Elements in Aircraft Performance

Air Traffic Control and Operations of Airports

The modernized air traffic controlling system is equipped with sophisticated instruments like radar, radio and wireless communication and computer facilities to locate the flying aircraft.... They can trace out the locations and speed of the aircraft on voyage.... Thus, the number of aircraft carrying out the flights can be increased considerably....
10 Pages (2500 words) Essay

Aircraft maintenance and structures

The absence of appreciation to the balance and weight on the aircraft performance specifically the combination of the performance factors.... The aircraft performance is depended on the wing airfoil design, the speed of movement of the wing, and the air density.... In this case, each and every pilot is expected to ascertain the fact that during pre-flight preparation the gross weight of the aircraft falls in the category of the safe limit of the flight when the aircraft performance is considered....
7 Pages (1750 words) Assignment

American Airlines Flight 1420

They were medically fit to conduct the flight with no tangible evidence of pre-existing conditions that would have adversely altered their performance.... It involved four flight attendants and 139 passengers (aircraft accident report, 2001).... 24 passengers sustained no injuries (aircraft accident report, 2001).... The plane suffered destruction from impact forces plus post-crash fire (aircraft accident report, 2001).... They were placed in charge of an equipped, certified and well-maintained aircraft with no evidence to suggest pre-existing failures of the engine and the entire system (aircraft accident report, 2001)....
4 Pages (1000 words) Research Paper

VMC in Aircraft Issues

The loss may cause huge damage unless critical response modalities are undertaken first hand to change and reconfigure the pitch attitude and drag predicament of the aircraft.... The departure of the aircraft can be continued and climb on a single engine especially when the speed is sufficiently fast (Gudmundsson, 2014)....
7 Pages (1750 words) Essay

Chinook Platforms Issue

The study "Chinook Platforms Issue" discusses the view on the Chinook platforms, providing the comparison between remanufactured airframes and new, fresh composite airframes, considering the four hypotheses in terms of safety, efficiency, proficiency, and operational savings.... owever, the survey seems to reestablish the fact that composite airframes are more superior on all counts, safety, efficiency, proficiency, and operational savings....
14 Pages (3500 words) Thesis

An Aviation: Aircraft Maintenance Planning Procedures

Airworthiness authorities remain the sole certifiers of the information contained in aircraft's' technical logs.... in aircraft maintenance, four types of checks exist, namely, check A to D.... This paper ''An Aviation '' tells that A technical log could be defined as an aircraft's document detailing the maintenance status of the aircraft.... The paper has information regarding the maintenance performed on the aircraft....
10 Pages (2500 words) Case Study

Aerodynamic Typical Light Aircraft vs Large Commercial Jet Design Features

The lower revolution speed provides higher propeller thrust at low flight speed, which improves the stability of the aircraft during take-off and climb performance.... ing designThe wing of the P2006 VELT aircraft is designed taking into consideration the need to have good flight performance and low structural weight according to Pascale and Nicolosi (2006, p.... The paper "Aerodynamic Typical Light aircraft vs Large Commercial Jet Design Features" has brought out these elements with regard to the aerodynamic design features of the two aircraft....
5 Pages (1250 words) Essay

Power Distribution in the Conventional Aircraft

… The modern trends in aircraft Hydraulic systemIntroductionTraditional air crafts relied on three sources of power to run their systems and subsystems namely the hydraulic system, pneumatic system and the electrical system.... These systems of power The modern trends in aircraft Hydraulic systemIntroductionTraditional air crafts relied on three sources of power to run their systems and subsystems namely the hydraulic system, pneumatic system and the electrical system....
8 Pages (2000 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us