Korotkoff sounds: A sound heard during the measurement of blood pressure by a sphygmomanometer. The pressure differences created in the cuff results in the turbulence of blood flow which leads to the audible sound known as first Korotkoff sound. Korotkoff sounds can be classified into five types. First heard when the pressure in the cuff is equal to the systolic pressure, second and third can be described as murmurs and tapping sounds respectively. Fourth sound is heard at 10mm above diastolic pressure while the last Korotkoff sound is heard at the precise diastolic pressure.Oscillometric principle: Another method of measuring blood pressure. It makes use of the same instrument but in addition, uses a transducer which gives the oscillation readings of the blood flow. As the pressure in the cuff varies with simultaneous expansion and contraction of brachial artery an oscillation is produced.Hypertension: A medical phenomenon indicating an increased systemic blood pressure. Normal blood pressure is described as ≤ 120 systolic and ≤ 80 diastolic. Generally, it is classified as primary and secondary hypertension with primary meaning with no apparent cause. iv) S1 and S2 heart sounds are produced due to the closure of valves in the heart namely the atrioventricular valves and the semilunar valves. On the other hand, Korotkoff sounds are produced when the pressure in the cuff varies and creates turbulence for the blood flowing through the brachial artery. This the need to differentiate between the two.
Cite this document
(“The measurement of arterial and blood pressure Lab Report”, n.d.)
Retrieved from https://studentshare.net/biology/1388586-the-measurement-of-arterial-and-blood-pressure
(The Measurement of Arterial and Blood Pressure Lab Report)
“The Measurement of Arterial and Blood Pressure Lab Report”, n.d. https://studentshare.net/biology/1388586-the-measurement-of-arterial-and-blood-pressure.
Cited: 0 times
This report "The measurement of arterial and blood pressure" discusses methods such as auscultation(the stethoscope), Korotkoff sounds (a sphygmomanometer), oscillometric principle. It also discusses that hypertension is a medical phenomenon indicating an increased systemic blood pressure…
Section A Calculation for RBC Length of one smallest square = 1/20 mm Width of one smallest square = 1/20 mm Depth of one smallest square = 1/10 mm Volume of one smallest square = 1/20 x 1/20 x 1/10 = 1/4000 mm3 Total number of RBCs counted = 1036 (5 squares, 4 corners + 1 center) No.
I opted to conduct this experiment in order to ascertain how blood pressure level tends to fluctuate under various body conditions. Moreover, unlike other experiments that require complex procedures and equipments that can only be conducted on animals or by qualified persons, blood pressure measurement requires simple skills and equipments.
Introduction Human beings consume caffeinated beverages on a regular basis. Caffeine can affect the central nervous system, increasing the blood pressure (Monroe, 1998). 200mg of caffeine pill makes one cup of coffee. Therefore, the caffeine pills used in this experiment were 200mg (Warren, 2010).
This is done when we breathe. We inhale oxygen (O2) and exhale carbon dioxide (CO2). In this manner air is distributed to many parts of the human body. The Respiratory system also comprises the olfactory receptors involve for the sense of smell.
"The respiratory system helps regulate the balance of acid and base in tissues, a process crucial for the normal functioning of cells.
Stroke volume (SV) is the amount of blood being pumped by the heart per each contraction, which is about 70mL in a resting man of average size in supine position (Ganong, 2003). Cardiac output (CO) is the amount of blood ejected by the heart per minute, defined in the equation CO = SV x HR.
(American Heart Association, 2008) Body composition tests help us scrutinize and analyze if our body compositions, especially body fats, are at normal and healthy levels. A test such as the blood lactate measurement is used by sport scientists, coaches and athletes to accurately
ty of the emitted fluorescence light varies with the concentration of the ions (H+, Na +, K +) or the partial pressure of the gas molecules (O2 and CO2 ) in the sample in a predictable fashion. The relationship is specific for each analyte. Before the analyte can bind to the