Assignment sample - Water Transfer In Poor Countries.

Water Transfer In Poor Countries. Assignment example
High school
Assignment
Design & Technology
Pages 12 (3012 words)
Download 0
There are extensive pressures on the nations to meet the water demands accordingly because of international conflicts, economic crisis, poverty, and water availability etc…

Introduction

Not only a management that is expert in the level is required but along with it there is a need to use alternatives water resources for the future water use that is affordable and even if it is not, then external funding for the transfer of the water is required. It tells us that sea water can be used in the developing countries for the different water use requirements. Although the water treatment for the sea water is not an easy task, but still it can be used as an alternative water source. Still the transferring of sea water to different parts of the developing countries could be costly, and extensive water supply engineering is required and a need to manage these water storage and transport facilities is a matter of cost and debate. ...
Download paper
Not exactly what you need?

Related papers

Capstone and Case Studies in Energy Technology
Human Performance and Anatomy of an Event …
42 pages (10542 words)
Liquid Gated Biosensor
6 18 Conductometric biosensor 19 Surface acoustic wave-based sensors 20 Bibliography 20 Farhan A.(2008 ).Nanobiosensors .American Society of Civil Engineers.Methods Mol Biol. Pp.115-26. 24 Further reading 24 Palchetti I, Laschi S, Mascini M. (2010). Electrochemical biosensor technology: application to pesticide detection. Universita degli Studi di Firenze. Italy. 25 Background/introduction…
20 pages (5020 words)
Water Absorption and Flexural Test For Glass Fibre Reinforced Polymer (GFRP)
After that a flexural test will be done using a three point bending method. The main objective of this experiment is to expand the knowledge about the GFRP and its behaviour. Glass fibre reinforced unsaturated polyester (GFRP) were subjected to water immersion tests to know the results of the water absorption on the mechanical properties. 20 specimens with 10cm long of GFRP were used to this…
10 pages (2510 words)
Different De-Icing Systems for Aircraft
This paper looks at the various systems used for de-icing in airplanes. The protection of engines and the aircrafts can take fundamental forms. One of them is the removal of ice once it has been formed, or probes be used to prevent it from forming. De-icing is the removal of ice, snow, or hoarfrost on the surface of the airplanes. However, deicing is correlated with anti-icing, which is defined as…
4 pages (1004 words)
How do designers in their work benefit or suffer from 'the network society' (Manuel Castells)?
The internet has in the recent past become the fibre of the modern social life. According to the available statistics, the number of people who uses internet has grown from under 40 million in 1995 to more than 1.5 million in 2009 (Stalder 2006, p.79). Manuel Castells, a senior professor of sociology have been studying the changes that are brought about by modern technology in the society and have…
7 pages (1757 words)
Nokia Smart Smartphone
This paper approves that the device also has a transparent and flexible screen that could be viewed at any angle without light interference and reflections. This feature also applies to diverse customers who deal with diverse tasks in their daily activities especially the outdoor activities. This means that the screen of the Smartphone will not be affected by reflections but rather will have an…
7 pages (1757 words)
Shell and tube heat exchanger design
The wall has to be conducive to allow heat exchange and still be sufficiently strong to withstand fluid/gas pressures. In shell and tube heat exchangers, two closed process streams move across the unit; one move inside the tube and the other moves on the shell side. Convection and conduction allows heat to pass from hot stream to cold stream from the side of the tube side or from shell side. …
7 pages (1757 words)