Please boost your Plan to download papers
Coursework example - heat exchanger design project
Design & Technology
Pages 10 (2510 words)
Heat Exchanger Design Project Heat Exchanger Design Name: Institution: 1 Objective The objective of the project is to come up with an elaborate design of a heat exchanger. This shall incorporate all the conditions at hand so as to have the heat within the system being within the constraints that are bearable for comfortable operation…
Extract of sample
The Flowrate of the system is to be designed to be 10,560 kg/hr The design also aims at getting the heat exchanger using hot Ethylene glycol which at the inlet shall be at a temperature of 350 K. At the outlet, the design is to have the hot ethylene at the temperature of 310K. At the same time, the design Pressure at the inlet is to be 2 atm. 2 Background Shell and Tube Heat Exchangers A shell and tube Heat Exchanger works with the principle that a series of parallel tubes run through a shell that is filled with a fluid that takes the heat from the series of parallel tubes. The tubes transfer heat into the fluid primarily through conduction and convection. It is a very effective heat exchange system where the heat is ejected from the pipes with a lot of ease. This mechanism of heat exchange is the most commonly used in industries as opposed to the numerous other mechanisms that are available. The walls of the tubes are key in the transfer of the heat from the parallel tubes to the coolant running in the shell. S & T Heat Exchanger Design Standards The Shell & Tube Heat Exchanger types are typically designed such that they are in such a wide range of shapes and sizes. The sizes usually range from 6 inch all the way to a whopping 40 inch just in their diameter. ...
Not exactly what