Our company is considering entering the manufacturing market for snow skis. You have been asked to examine all material(s) that - Research Paper Example

Only on StudentShare

Extract of sample
Our company is considering entering the manufacturing market for snow skis. You have been asked to examine all material(s) that

A number of companies mainly in United States and Europe are currently producing Snow skis. Throughout the history, various materials have been used in making of skis and advancement continues to be seen. Skis manufacturing have a long history. Based on archeological studies, a wooden ski was first identified in at Lake Sindor in Russia, the skiing equipment was dated to have been in use between 6300 and 5000 BC.(Burov 393). This is the earliest evidence involving the use of skis. Apart from artifacts of skis, many historical drawings and paintings have shown skiing activities where individuals use the skis. Ski construction started becoming dominant in the end of nineteenth century especially in Austria and Switzerland (Classic skis 1). The architecture of these early alpine skis was simple but they were wide and short. These characteristics enabled the skis to have high agility, hence capable of the ability to penetrate areas with deep snow and elevated areas. Since these early times, the designs, shape and the materials used in making skis has continued to diversify. Different types of wood have been used in the construction of the skis, varying from wood, plastics, metals or a blend of the three. The main materials in making of skis have been wood for the better part of the twentieth century. Different wooden materials have been in use depending on the place where the skis are located. ...
Download paper


Name Instructor Date Before engaging in any business venture, entrepreneurs take time to learn and conduct research on the requirements, history, and the potential of the business. Thorough research and understanding helps the business in defining its capacity and potential to meet the prevailing needs…
Author : ovacollier

Related Essays

Manufacturing technology
The fuel is then compressed and burnt after which it is expelled. Al the fuel is then moved through the cam or pop shaft, this is then moved to the gear and finally to the tires. An automotive piston that is found in the gasoline engine can withstand temperatures of up to 573K. There is a coolant that runs through the engine block and it always has a temperature of 363K. The piston must be cold when it is fixed into the cylinder. The piston can withstand high pressure of up to 10KPa inside the cylinder. It can withstand different atmospheres; it is able to do well in high latitude as well as...
18 pages (4518 words) Coursework
Material Science: Road Tires
Road wheels are designed to operate in a variety of environments as they run on dry, muddy, and water-logged paths. The tires are also designed to run on smooth and rough terrains. The material that is used for making road tires should hence be elastic, wear resistant, durable, strong, and resistant to oxidation and corrosion. This paper discusses the materials and processes used in the making of road tires. In the manufacture of tires, numerous materials are assembled together, built around a metallic drum, then cured and heat under pressure. The various components used in the manufacture of...
4 pages (1004 words) Research Paper
Material Failure and Embodied Energy
TASK 1 The bending of an umbrella when wind blows or the breaking of a bags handle, even the collapsing of mega structures like bridges and buildings are some prime examples of structural failure. Structure failure in basic terms can be defined as the destruction or damage of a structure when it is unable to support its designated load any further. Once the structure looses it ability to carry load, it deforms, de-shapes or even destroys completely. There are many reasons a structure can fail its basic ability to hold load (NEL, 2007) Many reasons as states in previously include basic design...
9 pages (2259 words) Essay
Engineering - Jute Material
The graph that is generated by jute is particularly characteristic of most composite and building material. From the graph, we can learn several facts about the jute that is put under the impact test. Jute occurs as a long, soft and shiny natural vegetable fibre and thus it has to be pre-processed before it is used in any form of construction. The fibre is woven to form laminates, which can be processed into a fibre that can be used in material production. Jute in its natural state is a fibre that is resistant to compressive and tensile stresses and has mechanical properties that are tougher...
5 pages (1255 words) Coursework
Comparimg Rigidising Methods Using Reenforced Material
Glass fibers are more effective in achieving shear strengthening. Various methods can be used in the reinforcement of polymers using carbon or glass fibers. Some of the methods include curing pressure increase and filler incorporation and vacuum infusion. This paper outlines a comparison among the various rigidising methods using reinforced material to increase the general strength of the materials. The electrical conductivity of the materials has also been analyzed [8]. Curing pressure increase and filler incorporation This ridigising method enhances the through-thickness thermal conductivity...
8 pages (2008 words) Literature review
Chemical and Material Engineering
The process of analyzing the mechanical qualities of nc by researchers is gradual since this process is experiencing various obstacles. Manufacture of the nc materials is one of the Chief impediments of the experimental evaluations of its properties. The preparation of nc involves factors, for example, porosity, contamination and residual stress, which significantly influence its mechanical capabilities (Lu, Lu & Sui, 4127). Indeed, a valid evaluation of the mechanical qualities of the nc requires a sample that is deficient of the contamination and residual stress. Such a sample will have to...
4 pages (1004 words) Essay
Civil Engineering material
To make a reliable and stable structure for living and working are one of the basic necessities every human feels greatly. Civil engineers are people which make this necessity to reality. Earth quakes are one of the greatest natural disaster humans face since the formation of planet. Causalities caused by the occurrence of earth quakes look very ugly on seeing them for the first time to naked eye. It is a blessing of nature that most of the quakes happen in the ocean. Many developed cities fall to this might force of nature; industries crashed down and also many of the civilizations vanished...
5 pages (1255 words) Essay
Got a tricky question? Receive an answer from students like you! Try us!