StudentShare solutions
Triangle menu

Manufacturing technology - Coursework Example

Nobody downloaded yet

Extract of sample
Manufacturing technology

The fuel is then compressed and burnt after which it is expelled. Al the fuel is then moved through the cam or pop shaft, this is then moved to the gear and finally to the tires. An automotive piston that is found in the gasoline engine can withstand temperatures of up to 573K. There is a coolant that runs through the engine block and it always has a temperature of 363K. The piston must be cold when it is fixed into the cylinder. The piston can withstand high pressure of up to 10KPa inside the cylinder. It can withstand different atmospheres; it is able to do well in high latitude as well as low latitude. However in high humidity the engine uses less fuel as compared to low humidity. 1 There are several materials that can be used to make an automotive piston. Some of this include aluminum and copper alloys. The material to be used should be able to withstand high temperatures to start with. This is because the temperature of the engine is too high and so the material has to be able to withstand this without melting or having to expand a lot. The material also has to be able to withstand high pressure. A material that does not withstand high pressure cannot be used in the engine because of the high pressure that is experienced in the engine. Due to its high melting point and its ability to withstand high pressure and stress, the ideal material to be used is aluminum. ...
The best however is the assembly of all the piston pins and rods. Before the assembly, the con rod is taken and there bores arranged in a parallel manner. This arrangement ensures that there is no bending of the cones when they are finally in use. Lubrication is another factor that is necessary. Before the pins are assembled in the cones care is needed to lubricate the pins to ensure that there is less friction between the pins and the cons. For the piston to withstand corrosion and abrasion it needs to be smoothened at the surfaces to make it look more clear and new. For better selection of which type manufacturing process is needed, CES process is used. The physical advantages as well as the cost of the processes are looked into. The software then gives out the best process to be used in terms of the cost and the mechanical advantages that it has to offer. Different methods contain different advantages but the best one that is used here is the manufacture by the powder rod technology. This process is the simplification of the sinter and the extensional press processes. During the (PPAP) process no heat or even spark should be removed so the forging is done in completely heating and when it is totally enclosed in the dies. Two forms of forging are necessary these are the hot upsetting and the hot repressing. In the hot upsetting, the there is a significant amount of lateral flow. The production per part approval process is the manufacturing process that was used here. This process has been approved by various agencies in the government as well as many institutions of higher learning. Unlike the (APQP) which has been used in the development and automotives for the many years, (PPAP) has few failures when it comes ...Show more

Summary

MANUFACTURING TECHNOLOGY Name Tutor Course College Date Automotive piston An automotive piston is one of the most important parts of an engine. Its function is to compress gasses that are within the combustion chamber or the combustion cylinder of an engine…
Author : salma69
Manufacturing technology essay example
Read Text Preview
Save Your Time for More Important Things
Let us write or edit the coursework on your topic
"Manufacturing technology"
with a personal 20% discount.
Grab the best paper

Check these samples - they also fit your topic

Managing Communication
Information is required for decision making at every level of the organisation ranging from the top level executives to low level supervisors1. It is in the best interest of the organization that adequate, reliable and relevant information is gathered, formatted, stored and made available to the relevant individuals in the right time for effective decision making.
3 pages (750 words) Coursework
Using infornation system (is) in manufacturing industries: outsourcing and data protection
Using infornation system (is) in manufacturing industries: outsourcing and data protection This has prompted manufacturing industry to opt for newer business approaches and practices like outsourcing, mass customization, minimizing time constraints, etc. Accordingly they have also changed their pricing strategies.
7 pages (1750 words) Coursework
Riordan Manufacturing Company
Today, Riordan Manufacturing is widely regarded as a foremost comprehensive worldwide manufacturing company of plastic inoculation molding products. Riordan Company employs several hundred employed personnel in two factories and has been projecting multimillion US$ earnings over the few years.
6 pages (1500 words) Coursework
Technology Change
Such are the likes of the WiFi technology, data storages and 4G celullar communications. As predicted by management expert, Dr. Peter Drucker, the progress in technology made workers in factories, employees in offices and even mobile CEOs become more productive and efficient in their work (Drucker, 1973, p.803).
1 pages (250 words) Coursework
Manufacturing process for rear spoiler for formula 1
e rear spoiler for a Formula 1 car is essentially geared to create the best aerodynamic efficiency that would allow the racing car to literally slide through the air (Nathan 2012). The rear wing is manufactured with the use of carbon fibre and is usually fastened rigidly to the
4 pages (1000 words) Coursework
Analyse the competitiveness of Danish manufacturing
In Danish, manufacturing industries have been noted to share economy. However, their manufacturing significance shares a central statistical evaluation from the national account (Daugherty, 2009.p.25). However, the
1 pages (250 words) Coursework
Wireless technology
Wireless technologies’ penetration to the remotest parts of the world today has made wireless technology impact the lives of humans both intentionally and unintentionally. While most of the
5 pages (1250 words) Coursework
Manufacturing Systems and Quality
Several areas of study have been used to establish the principles associated with the manufacturing process. For instance understanding the concepts of lean manufacturing, “just in time” manufacturing, total quality management and
9 pages (2250 words) Coursework
Manufacturing Systems and Quality
Improving manufacturing technologies involves collection and analysis of data and making sound decisions. The following are some of manufacturing technologies used. The Lean approaches are
14 pages (3500 words) Coursework
Hire a pro to write
a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Your email
YOUR PRIZE:
Apply my DISCOUNT
Comments (0)
Click to create a comment
Contact Us