You must have Credits on your Balance to download this sample
A New Tunnel under the Thames
Engineering and Construction
Pages 6 (1506 words)
Outline: Introduction Desk Study including location, background, relevant history, reasons for the crossing etc. Description of the access sites and existing features 2. An outline of the CDM requirements you would need to consider for this project. 3. An outline of the roles played by a Land/Engineering Surveyor, a Construction Manager and a Civil Engineer applied specifically to this project…
7. Include a set of drawings of your proposed tunnel, including a. a detailed cross section, b. a long section c. a map showing your suggested new road layout and d. a map indicating remedial works to minimise the impact of the extra traffic on the surrounding areas. 8. The site designated for the northern access (between Galleons Reach DLR and the river) is currently a brown field site with possible contamination, which includes an infestation of Japanese knotweed and some fly-tipping which may contain asbestos. Explain the procedures needed to bring the site into a condition suitable for construction. A new Tunnel under the Thames Introduction A tunnel is a subversive vessel, entirely covered a part from openings for entrance and exit, usually from both ends. A tunnel can be constructed for foot passage, rail, vehicle traffic, or a canal. The new Thames river crossing will allow closing of the Wool Wish Ferry. The bridge will relieve congestion for people living adjacent to Blackwall. This marks the location of Thames Gateway Road Bridge that was scrapped by the mayor in 2008, following the rejection of the plan by the Inspector at a Planning Inquiry. The tunnel, which will run from Greenwich Peninsula to the royal Docks, is expected to have a capacity of up to 2400 cars per hour in each route. ...
Not exactly what you need?