Got a tricky question? Receive an answer from students like you! Try us!

The McLaren SLR - Essay Example

Only on StudentShare
Undergraduate
Essay
Engineering and Construction
Pages 4 (1004 words)

Summary

A close look at the Mercedes-Benz McLaren SLR Mercedese-Benz and McLaren automotive signed a partnership that lasted eight years and the result was the Mercedes-Benz SLR McLaren . It is believed to be one of the most visionary car models of all time. SLR stands for Sport, Light, Racing…

Extract of sample
The McLaren SLR

So let us take a look at the McLaren SLR including it’s body, motor, brakes and saftey measures. The engine capacity of McLaren SLR is 5.5 liter. It operates with two spark plugs per cylinder to increase the power of the ignition during combustion (Mercedes-Benz SLR McLaren, n.d.). It consists of Sensotronic brake system or electrohydraulic brake system. It should be noted that in conventional brake system, the driver is responsible for producing brake pressure whereas in Sensotronic brake system a brake fluid supplies the brake pressure. Moreover, the brake disc of this car is manufactured from carbon-ceramic. In conventional cars, brake discs are manufactured from steel. Carbon fiber reinforced plastics (CFRP) is used for the construction of the body of this car. Even though light weighted, this materials provides enough strength to the car so that the driver may not feel any jerking or any other lightweight related problems while driving this vehicle fast. This car requires only 3.4 seconds to attain a speed of 100 km/h. Moreover it can cross 210 km/h mark within 11.2 seconds. Even though this car weighs around 2 tons, its fuel economy is very good. McLaren Edition (2011), Stirling Moss (2009), Roadster 722 S (2009), 722 GT (2007) Roadster (2007) and 722 Edition (2006) are some of the models of cars introduced by McLaren SLR. ...
Download paper
Not exactly what you need?

Related Essays

VLSI Technology and Reliability
Introduction Every day in the word transistors sizes and costs are decreasing while as their speed is increasing. The formation of MOS takes place by superimposing several layers of insulating, conducting and transistor forming materials. The CMOS technology provides two types of transistors namely the n-type transistor and the p-type transistor. Motivation The rapidity with which hardware technology is changing motivated writing of the paper. The main aspect was the reason that the hardware prices are getting cheaper while its quality is improving. History of CMOS The CMOS were invented in…
5 pages (1255 words)
Global Navigation System
The idea of a global setup for navigation and monitoring was conceived in around 1960s when feasibility studies were conducted for this purpose, and in late 1970s the setup was run practically. For first few years the operations were limited to military use and defense purposes while last decade of 20th century gave rise to commercial use of G.P.S. There are two more competitive forces in competition with NAVSTAR in this field, one run and administered by Russia called GLONASS, while Europeans have Galileo in place. The annual costs incurred in the working and maintenance of G.P.S is around…
3 pages (753 words)
Abandoned vehicle problem 2
It has been found that countries such as New Zealand have in place a well-thought procedure to deal with abandoned vehicles, based on the method of categorisation. It is observed that these vehicles can bring about certain uncalled-for social or community concerns such as fire in these vehicles, leakage of hazardous liquids from the vehicles and the use of such vehicles for certain criminal activities among others. Therefore, Saudi Arabia, which can be termed as one of emerging nations, needs to upgrade its existing mechanism to deal with the abandoned vehicles related problem which can…
6 pages (1506 words)
An Analysis of six Infrastructure projects that take place in two countries.
Differences in organizational cultures between companies or disparities in professional cultures between consultants, contractors and clients may exist. This dissertation aims to address the impact of political and cultural differences in project management of cross national projects. Apart from identifying the political and cultural differences that affect project management, case studies of six infrastructure construction projects in two countries have been conducted. The research suggests that differences in professional cultures, politics and institutions affect the successful management…
60 pages (15060 words)
aswan high dam
The choice of this site for the dam was determined by the amount of water that was necessary to impound to make Egypt independent of the annual flood. The old dam had carried the yearly control of the Nile to its limit without altering the country’s dependence on flood and the only way to advance past its position, to ensure independence of the river’s vagaries, was to impound enough water for a number of years. Daninos had marked the existence of a very large natural basin to the south of Aswan town capable of offering century storage if the gap caused by the Nile in its northern rim were…
Impact of Technology on Society (Automobile)
The automobile technology has had far reaching effects on the society. The advent of technology in the field of automobile has led to the design and production of high quality features of the automobiles used in the industry. The technological progress in the field of automobile has led to development in the cooling systems of engines, increased fuel efficiency of cars, advanced suspension and emission systems, increased horse-power, etc (Volti, 2004). The use of technologies has however, impacted the society by bringing about changes in the socio-economic lives of the people and also…
8 pages (2008 words)
ill attach the document that has the questions
Due to this pressure exerted on the pistons, the pistons in turn exert friction on the brake pads hence producing a clamping force on the rotating disc attached to the wheel disc. This clamping force is what is responsible for stopping the rotation disc hence the wheel. Figure 1 below shows the working principle of a braking system. [3] Figure 1 How do design & operational requirements influence material property requirements for the brake disc? The center of a brake disc contains bearings such that as the vehicle drivers presses the brake pad, the disc is mounted on the axle and is held in to…
12 pages (3012 words)