Redcuding carbon emssion on UK properties Essay example
Masters
Essay
Engineering and Construction
Pages 12 (3012 words)
Download 0
Reducing Carbon Emission on UK properties From time immemorial, people all over the world in their pursuit of optimum advancement have come up with many ‘constructive’ things. One of the ‘constructive’ things is the construction of buildings. From the earlier days, when humans lived in caves, mud settlements, etc., to the current times where they are living in architecturally strong and technology advanced buildings, the construction process have maximally evolved…

Introduction

“The significance of historic buildings clearly encompasses the architectural and aesthetic values…, associations with historic people and events, examples of technological innovations, aspects of social history and links with a building’s setting and other heritage assets.” (English Heritage 2011). Due to such crucial importance historic buildings are protected and also continuous refurbishments are made to it. However, at the same time, these historic buildings may not have sustainable designs and features. That is, these buildings because of their designs and other things could make negative Carbon imprint and thereby have environment damaging features. Carbon Dioxide (CO2) is one of the key Greenhouse Gases, which has many negative effects on the environment and also human living. It is widely considered to be the main cause of global warming and other pollutions, thus forcing governments of many countries including the UK government to come up with restriction on CO2 emissions. ...
Download paper
Not exactly what you need?

Related papers

Experimental work on the mechanical properties of concrete using recycled aggregates
The main characteristics of the concrete that we look at include the history, hydration of each type of concrete, properties on test and the mechanical strength of each type of concrete. Several articles are used for reference but are limited to their content in the comprehensive strength after a total of 90 days and the static modulus of elasticity is also checked at a maximum of 28 days. With…
Properties of Materials
There are two rules of thumb that have been given in comparing the density of materials i.e. titanium is nearly half the density of steel and that of aluminum is about one third the density of steel. Any heavy and weak material is considered bad but for a strong and light material is considered good. …
Report on carbon capture pilot plant
It seeks to make known the possibilities that can happen when the plant starts full operation; and to let those concerned know what is expected when the plant is commissioned to start running officially. The errors seen should not be ignored because they present another perspective to the test runs and show what should be expected. Keywords Absorption Gases, Heat Transfer, Safety, Heat Conduction,…
Characterisation material physical properties of porous materials
According to this theory, three different kinds of waves propagate within the porous material. One is the compression wave propagating in the fluid phase, the second is the compression wave travelling in the solid phase, and the third is the shear wave propagating in the solid phase (Pan & Jackson). The Biot model for predicting sound propagation in porous materials is based on five material…
Properties of Materials
According to a survey that was carried out by our firm, we realized that many instances windows were severely damaged. Upon keenly studying the damages, it was realized that it was partly due to environmental factors and partly due to poor maintenance. The damages on the widows caused variations in geometric configuration, composition, porosity and adherence of corrosion products. They also cause…
runway properties
There are two categories of landing distance; the actual landing distance, and the required landing distance. The actual landing distance is the total distance taken in landing and completely stopping after crossing the run way thresh hold at 50 ft (Civil Aviation Authority of New Zealand 2011). Required landing distance is the distance taken after a factor is applied to the actual landing…
Geotechnical Properties & Construction Methods
At this stage, Engineer will be collecting data from Geological survey, topographic maps, photogeology (aerial) , digital data, borehole records, national survey, mining records in order to understand the geology, compressive soils, drift thickness, landslides, soluble rocks, made ground, etc.… The main importance of the desk study is to understand the geological condition of the site in order…