. Bonded-wire strain gauges Research Paper example
Undergraduate
Research Paper
Engineering and Construction
Pages 3 (753 words)
Download 0
Name Professor’s Name Course Date Bonded-Wire Strain Gauges Abstract and Introduction of Sensor Abstract This paper discusses various sub topics related to the Bonded-Wire Strain Gauges as one of the types of sensors that are used in the industrial processes…

Introduction

The paper then discusses the application of the sensor I the industrial setting as well as the principle behind the mechanism of work. Finally, this paper gives a conclusion on this sensor with a remark on the possible future changes that are expected to be done on the sensor. Introduction In the strain measurement sensors, one of the sensors that are predominantly used is the strain gauge, the strain gauge comprise of an elastic unit that is resistive in nature and whose resistance change is a function of the strain applied. The wire gauge that is used in making this sensor is made of a resistor that is bonded together with an elastic backing, with reference to the bonded gauges sensors, they are pasted on a surface that is under study. Three are three various types of such bondage fine wire, semi-conductor, and metal foil. The choice of which bondage to use is dependent on the role that should be played by the sensor. History of Sensor Since 1856 when Lord Kelvin first demonstrated the relationship between the resistance and the strain of a conductor, there has been tremendous improvement on this knowledge that has served to be very instrumental in the development of this type of sensor. ...
Download paper
Not exactly what you need?

Related papers

Department of Mechanical and Automotive Engineering
The flow through the pipe could either be laminar or turbulent and so the experiment will be directed to distinguishing the kind of flow. Flow should be started through the pipe being investigated. The pipe must have manometers installed on both ends of the region being investigated. The diameter of the pipe must be measured beforehand. The discharged fluid should be collected in an appropriate…
Corrosion Protection in Offshore Pipelines
Currently there are several techniques used by oil and gas industries to combat offshore corrosion. Corrosion resistant alloys are often used to prevent corrosion, as well as certain pipeline coatings and cathodic protection of pipelines. Offshore monitoring is often executed as a preventative measure, via electrical resistance monitoring, electrochemical methods, hydrogen monitoring, weight-loss…
UCL TEST
AC= -2.5/sinO Sum of forces in the x-axis=o AB+CcosO=0, AB=-2.5/sinOXcosO=2.5/tanO Joint C 1 D C A B Sum of forces in the y-axis=0 -CA sinO+ CD sinO-1- CB cosO=0 Sum of forces in the x-axis=o -CA cosO+C D cosO+ CBsinO=0 Solving the equations we find CD &CB Joint B D C A B E Sum of forces in the y-axis=0 BC cosO+ BD cosO =0 Sum of forces in the x-axis=o -BA + BC sinO + BE +BD sinO =0 Solving we get…
Materials and Hardware
The Change from One Material to Another in Aircraft Development The method for the choice of materials for aircraft development has changed over the years. For the Flyer, the Wright brothers utilized the first cast aluminium engine block and the major drivers for the material chosen were static strength and weight. The materials used on the main airframe were wood covered with a fabric. Wood is a…
Nanowire Battery
The basic electrodes in a lithium ion battery are modified by nanotechnology to improve the performance. This article intends to discuss the objectives of the nanowire battery technology. The basic features and the technology behind these batteries are discussed along with their advantages. Finally, the challenges and applications of Nano wire batteries are presented. Introduction The speed of…
Engineering - Steel Report
According to Degarmo and Black (2003, p.56), reinforced bars with high ductility and tensile strength are often preferred because they allow the materials to be rolled, drawn or made longer without breakage. Generally the tensile strength of reinforcing steel can be measured by dividing the cross sectional area of the steel tested by the stress exerted on the material. The amount of stretching…
sensor
The feedback system is designed so well that it updates the status of input torque in fraction of a second and as a result exoskeleton keeps working accordingly; and works well with frequent torque changes. A heel pressure sensor is required that produces an electrical signal whenever heel touches the ground or force is sensed on the heels because of its interaction with the ground. Signal from…