Automotive Assignment example
High school
Assignment
Engineering and Construction
Pages 6 (1506 words)
Download 0
ABANDONED VEHICLES PROBLEM IN NEW ZEALAND Name: Course: Tutor: Date: AUTOMOTIVE ENGINEERING SUMMARY The supply of the motor vehicles in New Zealand increased considerably after the deregulation of the motor vehicle industry. The deregulation was enacted in the year 1986…

Introduction

Therefore, most of the used motor vehicles are abandoned every year on public property. The rate of motor vehicles deregistration stands at 20% yearly. However, the owners of the abandoned motor vehicles are not easily traced. The New Zealand authorities always try to locate the owners of the abandoned vehicles. Their search at times pays. The authorities are able to locate about 35% of the abandoned car owner. However, this rate is minimal compared to the rate of vehicles which are being abandoned yearly (Kenny, 2001). INTRODUCTION New Zealand had a total of 1.5 million passengers’ cars in the year 1986. This number considerably increased to 2.5 million in the year 2004. The approximated value of used cars that are being imported to the country stands at 70%. Most of these used cars are abandoned by their owners on both private and public properties. The abandonment of these used cars possessed a lot of environmental concerns. This has prompted the motor vehicle industry to come up with policies that reduce the pollution caused. Some of these policies are removal of operating fluids, battery, LPG tanks, tires, CFCs present in the air conditioning units, and defusing of air bags and seat-belts. New Zealand authorities therefore, need to benchmark with Western Europe countries so as to solve their motor vehicle abandonment practices. ...
Download paper
Not exactly what you need?

Related papers

Department of Mechanical and Automotive Engineering
Flow should be started through the pipe being investigated. The pipe must have manometers installed on both ends of the region being investigated. The diameter of the pipe must be measured beforehand. The discharged fluid should be collected in an appropriate container that can aid volume measurement. A stop watch should be used to monitor the total time required for a certain volume to flow.…
Acoustical Characterization of porous Materials for Automotive Applications
Porous materials come in several forms, ranging from rigid to limp to elastic. They also vary across sound propagation parameters, such as porosity, tortuosity, flow, resistivity, viscous characteristic length and thermal characteristic length. Porous materials have two phases; the solid phase, which is fibrous in nature, forms the frame, while the interstitial fluid fills up the pores in the…
A New Zealand Automotive Workshop
This paper will discuss the eight core areas and will give examples of the areas in terms of how they operate in reality. Introduction There is a wide variety of approaches to having an automotive shop in New Zealand. There are independently owned shops, franchise owned shops, and franchise shops that are independently owned and shops tied into automotive dealerships. There are also those who…
Acoustical Characterization of Porous Materials for Automotive Application
There exists diversity when it comes to porous materials either artificial or natural. Sintered, steel wool, perforated materials and fiber metal are among the porous materials that have been increasingly used in automotive noise control. Following the diversity and variety of porous material characteristics, the study of porous media has proved to be wide and interesting. The review begins with…
Product Technology : Automotive Components
However, steel is always considered as the most dominant material for manufacturing the car frames. The important factors that are considered in automobile manufacturing are the durability, sustainability and the economic value of the vehicle. Modern vehicles are made to save a lot of gas and give better performance as compared to the previous versions. However, luxury and comfort are not…
Automotive Vs. Computers
The paper is going to focus on Toyota and Dell as the products of these industries. Toyota has in the past been depending on its o its major supplier in Japan. However, Toyota being the current leading automotive supplier of cars in the world embarked on a competitive strategy that involved the production of quality cars hence utilized a reliable approach. In addition, Toyota’s supply chain…
product technology : Automotive components
However, most of us do not understand the manufacturing processes and the materials used in the manufacture of some parts of an automobile. Eronen (2012, p.2) reveals that a typical automobile involves an assembling of about 15,000 parts ranging from a thin electrical wire to steel of aluminum wheels. The assembling of these components is what makes the cars we see on the roads. Automobile…