StudentShare solutions
Finite Element Method in Computer Simulation
3 pages (750 words)
...Computer Simulation By Describe, in detail, the basic principle of finite element analysis. In the past few years, finite element analysis (FEA) has turned out to be a foundation of a multibillion dollar per year industrial sector. In fact, FEA can be used to obtain customarily numerical solutions to even very complex stress problems, and this technique is so significant that even preliminary treatments of mechanics of materials should include this method as an essential tool. The majority of engineers at the present make use of FEA to recognize and simulate that how a mechanical instrument or system (typically a manufacturing practice or engineered product) will act... in response to...
Computer Simulation of Action Potentials in Squid Axon
9 pages (2250 words)
...computer program to study the generation of action potentials using electrical stimuli was conducted. By modifying the strength and duration of stimuli, the changes in the action potential’s latency and strength were observed. During the experiment, it was seen that the latency of the response was dependent on the strength of the stimulus, and not on the duration by which the membrane is exposed to the stimulus. However, in contrast to latency, the strength of the action potential was not modified by either strength or duration of stimulus. As well... have the activation gate (facing extracellularly) closed while the other gate is opened. At this time the K+ channels are closed as well. When...
Simulation and systems modelling
12 pages (3000 words)
...computer simulation methods have developed since the early 1960s. (Holst, 2001) A model can be defined as "A representation of a system for the purpose of studying the system". (Holst, 2001) Holst defines discrete event simulation (DES) as "The modeling over time of a system all of whose state changes occur at discrete points in time those points when an event occurs". In discrete event simulation, the operation of a system is represented as a chronological sequence of events. Each event occurs at an instant in time and marks a change of state in the system (Banks et al, 2005) 2.2 The Need for Simulation in Management The need for simulation applications in management... Simulation And Systems...
4 pages (1000 words)
...simulation process has four phases. Firstly define the problem and statement of objectives. Secondly construct an appropriate model. Thirdly conduct experiments with the constructed model. Finally, evaluate the results of simulation (Banks, 2005, p.16). Although there are many types of simulation, this project focuses on probabilistic simulation using Monte Carlo method (Torries, 1998, p.59). It is also called computer simulation which is a numerical technique involving the modelling of a stochastic system to predict the systems behavior. The essential charactertistic of Monte Carlo simulation is the chance element (Kalos and Whitlock, 2008, p.116). This approach is used when... Business Simulation...
Modelling and Simulation of engineering systems
4 pages (1000 words)
...Simulation of engineering systems Modelling and Simulation of engineering systems is well documented in the literature and a digital computer solution can be performed using various methods, such as numeric programming, symbolic programming and the electromagnetic transient program (EMTP) (Krause 1038-1053; Ghani 106-114). With the rapid development in computer hardware and software, new simulation packages which are faster and more user friendly are now available. This paper discusses the use of one such product, the SIMULINK software of MATLAB, in the dynamic modelling of the induction motor. The main advantage of SIMULINK over other programming softwares is that, instead... in the...
Llean Implementation Using VSM and Simulation
20 pages (5000 words)
...COMPUTER SIMULATION The proposed research is aimed at developing the work flow within the manufacturing process of ACW, and proposes to implement lean techniques for doing so as has been already mentioned. But in order to do this, one must first reaffirm that the proposed initiatives will bring the desired changes and will work their way towards achieving the desirted objectives. It is in this regard that the simulation of thew work flow becomes a critical... CASE STUDY ON LEAN IMPLEMENTATION USING VSM & SIMULATION Mass production has been one of the key factors for the success of thedeveloped nations of today's world. The concept of mass production has led us to such a state that the industry...
Case study on lean implementation using VSM and simulation
...COMPUTER SIMULATION The proposed research is aimed at developing the work flow within the manufacturing process of ACW, and proposes to implement lean techniques for doing so as has been already mentioned. But in order to do this, one must first reaffirm that the proposed initiatives will bring the desired changes and will work their way towards achieving the desirted objectives. It is in this regard that the simulation of thew work flow becomes a critical determinant for the successful estimation of any proposed changes & measures... . With the availability of the all-powerful personal computer at our disposal, it becomes mush more easier to...
1. Read these articles (they are short) :) http://www.sciencedaily.com/releases/2008/02/080229141032.htm http://www.sciencedaily.com/releases/2009/04/090401114818.htm 2. Do you believe it is possible for a robot to acquire language (truly learn langua
1 pages (250 words)
...computer simulation of a brain so that it can process the information from its environment and respond through physical gestures of arms, fingers, eyes and head. If the scientists are successful in this progress, they would reproduce a technological clone of human, talking and responding in a humanly manner. Language skills and cognition capabilities are a highly processed and intricate progression, which the humans acquire through close... Psychology Currently experimental projects are under process, which will result in the formationof robots which can exhibit the verbal and cognitive qualities of humans. They would be able to talk in a similar fashion like humans and the robot will be linked to a...
Alternative solutions for Animal testing on medication
4 pages (1000 words)
...computer simulation system and in-vitro testing, that is conducted in artificial environment outside the living organism. Though replacement is the only animal-free strategy, reduction and refinement should not be underestimated. Thus building databases of tests to avoid duplication is another way to help to decrease animal suffering. Computer simulation models complicated human systems that are meant to allow testing new drugs and forecasting for example person's cardiac fate, the tasks for which animals are also used (Duncan, 2008). Nevertheless... ﻿ Alternative solutions for Animal testing on medication Introduction I consider the animal testing to be to be a big problem in the United s. Researchers ...
Construction op. analysis (reading articles) R4
1 pages (250 words)
...Simulation of Concrete paving operation on interstate. Question: What makes the construction process complex and how does Computer Simulation come handy? Answer: The steps involved in the construction are continuous where the output of the preceding step is input of the succeeding step (Marwa, 1-9). Simulation comes in handy since in the modeling, the steps are events which are detached paving way for dynamic modeling. This way, the isolated condition will change drastically at the various instants. WORK CITED Charnes, et al. Simulation of Complex Construction Processes. Proceedings of the 1996 winter... Lecturer: CONSTRUCTION OP. ANALYSIS (READING ARTICLES) R4 Simulation of complex construction...
Information Security
12 pages (3000 words)
...Computer simulation techniques enable the designing of a model of a real system, such that the model is implemented as a computer program. Organizational changes can be clearly understood through such simulation techniques such that an organization becomes capable of deciding on the measures that are needed to be considered in order to manage such changes. Computer simulations are generally used to improve the present state of working of an organization increasing the level of output of the work, or even newer systems may be designed that may fulfill several needs of the organization may be a lower cost than the current systems. However the use of computer... simulations has...
Training Simulation for Doctors: An Evaluation
40 pages (10000 words)
...simulations that are designed to improve the doctors’ training exposure is one of the National Health Service (NHS) approaches and strategies in order to improve the overall quality of the health care system throughout the United Kingdom. Since 2009, the NHS invested more than ?16.19 million on Innovative Simulation and Technology-enhanced Learning Initiative (STeLI) and other related training programmes (Moss, 2010). Even though doctors can receive better training exposure from an on-the-job training programme, the process of maximizing the use of technology (i.e. hi-tech computer simulators that are present in manikins... ? Training Simulation for Doctors: An Evaluation Total Number of Words: 9,586...
Computer think
10 pages (2500 words)
...computer simulation programs by which a player is able to make use of his abilities. Another implementation of computers in this field is to recognize errors inside system. Weather Forecasting: A special type of computers known as supercomputer is utilized to evaluate and forecast weather conditions. Future of Computers Computer technology is progressing day by day with the intention that it smoothes its way in our everyday life and life is becoming increasingly expedient and relaxed. Furthermore one of imperative offerings of computer technology is the improved communication plus interaction technology which we generally befit these days... ID # Computer Think During the last few decades, science has...
IT in architectural competition (BIM, simulation and DIGITALO)
10 pages (2500 words)
...Computer simulations A computer simulation is an attempt to model a real-life or hypothetical situation on a computer. It helps the observer to feel at first hand the experience of reality even though he is only observing a virtual image. It is a tool for experimentation and training when they are prohibited in real life by both costs and practical considerations... 4.4.3. Senate Properties BIM requirements In 2001, Senate Properties as one of the largest Finnish building asset management companies, commenced working on a number of pilot projects to develop building information models. These models covered various aspects like design, costs, life cycle attributes etc. as applied on alternative choices....
Simulation of Server Virtualisation
58 pages (14500 words)
...Simulation of Server Virtualisation 1. Introduction and Overview of Server Virtualization 1.1 Introduction: Server virtualization is the method of splitting a server into different virtual servers. Virtualization broadly refers to the abstraction of computer resources. Each virtual server can run on its own as a different operating system and can be independently rebooted. The main intension of server virtualization is to increase the CPU utilization and congestion if any. One of the key factors involved in virtualization of server is to share the resources among servers. This can be done using partitioning of one server into many virtual servers. By...
How to Take a Blood Pressure
5 pages (1250 words)
...computer simulation and video are also studied in depth. Finally, a new computer program is developed that will enable individuals to learn everything about taking blood pressure. Introduction Teaching how to take blood pressure is a matter... ? How to Take a Blood Pressure? (College) This study is an effort to introduce a new method to help individuals learn the theory and practice of taking blood pressure. Firstly, the study looks into various scholarly works on the subject to identify various ways adopted in the present medical curriculum to teach blood pressure measurement. In addition, it looks into the efficiencies and deficiencies of the present ways of teaching. Thereafter, the usefulness of...
Simulation technology
6 pages (1500 words)
...simulation that has confirmed efficient in other features of product development, for instance computer-aided design1 and bill of materials. A sound management structure provides companies immediate access to current scholarly material goods that can assist them with their existing work (Cadotte 1995). Providing abilities for decision support is about guaranteeing a product will meet up its serviceable prerequisites; possess most favorable outlay, credence and robustness; and be planned, produced and iterated in the smallest possible amount of time (Cadotte 1995). To prop up these ends, simulation management answers must offer management devices for striking planned... Introduction Simulation Technology...
EDU 640 DB#1
5 pages (1250 words)
...computer simulation and video are also studied in depth. Finally, a new computer program is developed that will enable individuals to learn everything about taking blood pressure. Introduction Teaching how to take blood pressure is a matter... How to Take a Blood Pressure? (College) This study is an effort to introduce a new method to help individuals learn the theory and practice of taking blood pressure. Firstly, the study looks into various scholarly works on the subject to identify various ways adopted in the present medical curriculum to teach blood pressure measurement. In addition, it looks into the efficiencies and deficiencies of the present ways of teaching. Thereafter, the usefulness of...
The Important of Simulations
2 pages (500 words)
...Simulations Affiliation The simulation process includes various processes. These include definition, designing, constructing, analysing, as well as interpreting. It does not just involve just one experiment or a model execution on a computer. Simulation means mimicking through experimentation. However, it involves more than that. 1-Simulation has become part and parcel of human life. It is interesting how it is used in gaming. Individuals are used to playing tennis with the ball moving to the direction of both players on the bases of heating the ball towards ones’ opponent. It is interesting that with simulation there is even no need to train so as to play any game. They only... The Importance of...
Is it Cost-Effective to Invest on Simulation Training in order to Improve the Management and Leadership Skills of the Doctors
39 pages (9750 words)
...simulation programme, several studies concludes that the doctors’ ability to work as a team increases (Aggarwal, Ward, Balasundaram et al., 2007; Shapiro, Morey, and Small et al., 2004; Holcomb, Dumire, and Crommett et al., 2002). Furthermore, several authors claimed that the use of medical simulators are effective in terms of improving the doctors’ clinical knowledge, human interaction skills, and attitude (SKA) (Knudson, Khaw, and Bullard et al., 2008; DeVita, Schaefer, and Lutz et al., 2005; Shapiro, Morey, and Small et al., 2004; Holcomb, Dumire, and Crommett et al., 2002). Either through the use of computers and/or other related technological... ? Is it Cost-Effective to Invest on Simulation...
Solid Work Simulation
4 pages (1000 words)
...simulation (Zhang et al. 2005, Zhang et al. 2006). A subdivision of model during the analysis becomes necessary for the mathematical simulation. This task of subdividing is normally called to be the Meshing. Meshing helps to come up with more accurate results, at the same time it will require more computer resources. One can always make use of the mesh control to reduce the size of the element in order to improve the accuracy of the results. One must chose the type of mesh at the time of making study. If the analysis is done to a bulky model the Solid Mesh is used. When using mid surfaces with simple models with constant... The Method of Simulation Construct During the Analysis The method of...
Simulation in Nursing
8 pages (1750 words)
...simulation; these include the use of a manikin which actually provided the real time physiologic feedback. Besides, there is the virtual reality simulator created by Satava. Satava’s simulator created an enabling environment for close interlinking between computers based training techniques and adequate assessment of technical surgical skills (Seymour et al., 2002). Benefits of Simulation in Nursing Simulation has been used in various fields over time such as engineering, military, aviation, and mining among other sectors. The technique only came into medical field a decade ago and its impacts are already notable and felt all over... ﻿Simulation in Nursing Abstract There has been a growing trend in nursi...
Operations and IT Management
2 pages (500 words)
...Computer-based simulations However, after going through the processes mentioned above, it is certain that computer simulation is an improvement as a learning mechanism to the theoretical aspects of learning as experienced in the past when office automating had not been established. It is easier to carry out computer simulation being that all relevant materials are within your reach through online and digital information source lowering the risks involved in production process (Wah, 2004, p. 19). Appendix 1 Accessed from : http://www.google.com/products/catalog?hl=en&gs_upl=46957l46957l0l48488l1l1l0l0l0l0l338l338l3-1l1l0... Running Head: THE CAMERON BALLOONS VIRTUAL FACTORY The Cameron Balloons Virtual...
Donald Greenbergs achievement in the field of computer graphics(Term paper )
13 pages (3250 words)
...computer graphics are: 1. Computational biology 2. Computational physics 3. Computer-aided design 4. Computer simulation 5. Digital art 6. Education 7. Graphic design 8. Infographics 9. Information visualization 10. Scientific visualization 11. Video Games 12. Virtual reality 13. Web design 3D computer graphics as compared to 2D computer graphics are graphics that use a three-dimensional representation of geometric data that is stored in the computer for the purposes of performing calculations and rendering 2D images. Such images may be for later display or for real-time viewing. Inspite of these differences, 3D computer graphics depends on many of the same algorithms... Computer graphics:...
Duration estimation a new approach in Critical chain scheduling
2 pages (500 words)
...computer simulation on a number of the test problems. Simulation analysis proves that the suggested technique yields schedules that are more dependable than the schedules established by first CCPM technique of duration estimation. Some of the crucial key terms discussed in this article include critical chain, theory of constraint, duration estimation and project scheduling. Critical chain, according to Rezaie, Manouchehrabadi & Shirkouhi (481) is the longest series of events through the project network... Duration Estimation A New Approach in Critical Chain Scheduling Rezaie, Manouchehrabadi & Shirkouhi (481) discuss thecritical chain project management (CCPM), which was initiated in 1997 by Goldratt,...
Physiology and metabolism, cardiovascular system, MacMan computer simuklation
...computer simuklation Physiology and Metabolism Macman – Computer Simulation Report Institution Introduction Physiological homeostasis in the cardiovascular system is maintained depending on baroreceptor and chemoreceptor reflexes. Baroreceptor reflexes respond to changes in blood pressure and chemoreceptor reflexes respond to changes in pH, which are usually caused by an increase or decrease in blood CO2 (Scanlon & Sanders, 2011). (will insert diagrams here) In this computer simulation, changes of the internal and external environments such as arterial resistance, venous resistance, cardiac pump resistance, and blood volume, were conducted... Physiology and metabolism, cardiovascular system, MacMan...
Simulation in Nursing Training
14 pages (3500 words)
...computer programs and life size mannequins. In their most modern form the mannequins are fitted with sensors and provide instant feedback to the learner. This enables the trainees to correct their mistakes immediately instead of waiting for the instructor to tell them where they went wrong. Simulation is not only beneficial for the learners, the nurses can also enhance their skills and learn new procedures through this technique. Although expensive, this method of teaching is reliable and effective. Simulation in Nursing Training Nursing is one of the careers in which learning through practice is the best... ? Simulation in Nursing Training Executive Summary Simulation has emerged as a useful learning...
Literature Review
4 pages (1000 words)
...Simulation Table of Contents Introduction 2 2.Benefits of using simulation within appropriate manufacturing organizations 3 3.Barriers that may prevent or make the use of simulation ineffective 3 4.Factors that you would consider towards selecting appropriate simulation software for use within a manufacturing organization 5 6.Presentation 7 7.Conclusion 8 8.References 9 1. Introduction Simulation is the replication of real world events, operations and processes to models. It involves the creation of a simulated history of a system whereby the study of that simulated system...
Simulation Modeling In Oil And Gas Industries
3 pages (750 words)
...Simulation modeling is the process of creating computer models that represent the actual production and important logistics processes in the oil industry. The process not only considers the viability of the designed project but it is useful in the prediction of uncertainty such as weather in the oil industry. The aspect of uncertainty is incorporated into the models as random variable, these variables represents uncertain events such as equipment breakdown and destructive weather condition. The system depends on statistical distribution to determine frequency and patterns that determine the occurrence of uncertain events. Using simulation enables... ?Simulation Modeling In Oil And Gas Industries...
Uses of Simulation Technology in Hospitals
4 pages (1000 words)
...computer based may be used in finding a solution to a given research conducted (Wilson & Rockstraw, 2011). Through simulation, learners can experience a safe environment for practice. This is because of the technology which prevents one from endangering the health of the patient which makes it a better tool to be used as compared to the traditional education which was risky to the patient’s life (Satava, 1995). The environment can also be seen to as conducive as it allows learning with feedback which is crucial in the clinical skill development. Through teamwork and better communication clinical problems are able to be solved by its identification of the...
Simulation Analysis
4 pages (1000 words)
...Simulation. The simulation showcased a company called Quasar Corporation. The company in 2003 invented a new optical computer, the neutron, which is five times faster than typical computers. They hold patent protection which gives them exclusivity over the market for the next years. Since Quasar is the sole participant in the marketplace they have just created... The business world is an ever changing environment in which corporate executives must adjust their strategies based on market changes and the firm’s life cycle. The strategic option of an executive must adjust themselves accordingly depending on the market structure in which the company is operation. This report discusses the Market Structure...
A Scientist: I Am the Enemy
3 pages (750 words)
...computer simulated processes of animal experimentation (Kline, 1999). Animal rights activists claim that instead of animal experimentation, researchers can adopt computer simulated... A Scientist: "I Am the Enemy" A Scientist: "I Am the Enemy" A Scientist: “I am the Enemy” is an article written by Ron Kline, who was born in 1961 in Los Angeles, California. He has held various positions including assistant professor at the University of Louisville and director of the pediatric bone marrow transplant program. He developed a passion for immunotherapy of cancer and went ahead to publish articles on this topic. He has been the biotechnology fellow in the Experimental Immunology Branch of the National Cancer...
Computer Center
16 pages (4000 words)
...Simulation Exam - Case of Computer Center ID 19714 Order No. 286430 [Course Name] [Supervisor] [Any other details] 05 April 2009 Table of Contents: Table of Figures Figure No. Description and Word Hyperlink Figure 1 The Simulation Model for the Computer Center Figure 2 Settings of Inputs Figure 3 configuration of job readers Figure 4 Print Spooler configuration Figure 5 Line Printer Configuration Figure 6 Simulation configurations Figure 7 No. of entities entered the system Figure 8 Wait time per entity Figure 9 Total system throughput per entity Figure 10 Throughput at every stage Figure 11 Utilization of servers Figure 12 Jackson network... configurations of...
A Typology of Simulation Fidelity
5 pages (1250 words)
...Simulation "Simulation is the process of designing a model of a real system and conducting experiment with this model for the purpose either of understanding the behavior of the system or of evaluating various strategies ( within the limits imposed by a criterion or set of criteria ) for the operation of the system." (R.E. Shannon) Fidelity When considering avionics within the limits of specific aircraft type a distinction is required between high fidelity and low fidelity system. Low Fidelity: When stimulator is not designed exactly then there is no use of the actual avionic devices rather the appearance of the instrument is represented digitally on a computer display. This kind of...
Position Paper
4 pages (1000 words)
...simulation. Simulations can be delivered to the student via case analysis, group interactions, computer Sims, video Sims, printed material among other alternatives. I personally took a course a few ago online in which computer simulation were utilized as the on of the main assessment methods. I saw first hand how the computer simulation was able to apply artificial intelligence to correct my erroneous paths and create alternative routes or alternatives to a problem, thus the assessment was actually teaching things while I committed errors in the simulation which depicted a real life scenario type learning experience. A simulation does not test a specific... November 8, 2007 Improved Assessment Methods...
Management Practices and Operations
2 pages (500 words)
...computer simulation. Computer simulation is more... The Canbide Corporation is a multi-national, publicly traded (NYSE), US - based manufacturing company dealing in petrochemical products. Two years ago it purchased a leading Korean electronics company. At present the company has manufacturing, distribution and marketing problems as its two product groups are heterogeneous in nature. For our study we have selected three key issues summarized as below: 1. Customer service problems at the Denver facility. 2. Production facilities in the Pacific Northwest Oregon not working effectively. 3. Copier rehab facility near Charleston, SC difficult labor and material planning situation. Detailed Analysis. 1. Custome...
Comparing Two Arguments
3 pages (750 words)
...computer simulation may help but it will not be enough to imitate the different processes happening within one’s live body. Thus, it is important to have live subjects... ? Our belief in the different methods that science and technology use varies from one person to another. We don’t always see eye to eye. And even those within the field itself, they differ in their perspectives. Even more, individuals from outside of the field would either be against, for or apathetic to the scientific issues that are faced by the field of science and technology. One of the most popular debates that the scientific industry face is the use of animals in scientific experiments. We can look into Karpati and Caras’ articles ...
Nurse Educators Perceptions Using Simulation in Teaching: Change in Technology
13 pages (3250 words)
...simulation started in education over 40 years ago, and the first simulators were computer-based rather than the sophisticated programs that are in use today. Also, students who use simulation must “suspend reality and interact with the simulator as though... of the limitations of this study is that there are only 15 participants. The study will be too small to make generalizations about all teachers who use simulations. Researcher bias can limit phenomenological studies so it is imperative for the researcher to be able to bracket emotions and any preconceived ideas about the research (Beech, 1999). Another limitation, according to Maxwell (2012), is that the participants may...
Simulation Of Routing Protocols
5 pages (1250 words)
...SIMULATION OF ROUTING PROTOCOLS Simulation Of Routing Protocols [The [The of the Simulation Of Routing Protocols In Ad Hoc Network In Starlogo Environment Introduction According to the latest research, Multihop, wireless, ad hoc networking has been the focal point of numerous current research and expansion labors for its applications in military, commercial, and instructive environments such as wireless LAN links in the office, networks of appliances at home, and special sensor networks. A amount of routing protocols have been projected to make available multi-hop communication in wireless, ad hoc networks. Usually these protocols are assessing in terms of packet loss rates, routing... Running Head:...
Multi Protocol Label Switching Simulation
10 pages (2500 words)
...SIMULATION Introduction: MPLS, Multi Protocol Label Switching provides a great opportunity for big organizations which delve into telecommunication & data networks. When we talk about telecommunication & data networks, we consider how the data from one place to another will move without interruption. When we attend a telephone call, we receive and send sound signals to each other. Similarly when we attach our computer to the telephone line, not only we can transfer the sound signal but also we can transfer the written information like file transfer, through the modem (modulator & demodulator). Modem converts analog signal to digital signals & digital...
Decision Analysis for Management Judgment
3 pages (750 words)
...computer simulation is nothing but an attempt to model a hypothetical situation and observer can see how the system works (Kumar, Kapil, Kumar and Yadav, 2009, pp. 29-33). d) Baye’s Theorem Bayes theorem is important in mathematical manipulation of conditional probabilities. It is a direct application of conditional probabilities. This theory was originally invented by the Reverend Thomas Bayes. It shows the way of understanding by which people can understand the theory which is true and affected by a new piece of evidence. This theory... Decision Analysis for Management Judgment: Introduction There are several techniques through which decisions can be analyzed for doing judgment of managerial...
Batch Distillation Column
2 pages (500 words)
...Simulation, Optimal Design, and Control, Second Edition. Boca Raton, FL: CRC Press. Jana. (2008). Chemical Process Modelling & Computer Simulation. New Delhi: PHI Learning Pvt. Ltd.... DISTILLATION COLUMN BATCH DISTILLATION COLUMN Summary Distillation is a process that is vital in the separation of liquid mixtures. This process can be conducted in either a continuous or discontinuous manner. That the latter is the basis of batch distillation. In batch distillation, the apparatus for use are loaded with the mixture to be separated at the start-up time. Different fractions of the mixture are then taken out one after another that is in batches, thus giving this process its name. The batch operation is di...
Workplace simulation
9 pages (2250 words)
...SIMULATION Profile This project covers the various techniques that Riordan manufactures will employ to gather information from its customers in the various states and from its employees in the HR department. It also covers the various types of human resource information systems that are applicable to the HR department. That is HRIS, HR intranets and HRMS. As a part of the HR department, it is the job of the author to formulate and employ the simulation. Riordan manufacturing Inc is a successful company that was established in 1991. It has expanded its operations from a research and development company to plastic manufacturing company. The company prides itself on having a large customer... WORKPLACE...
The moment have changed my life
2 pages (500 words)
...computer simulation that showed the different angles and perspectives of an object that was smiley complicated to understand with only the imagination that I had. It was from this moment that I was drawn to computers and thought of my previous ignorance and withdrawal from them as an act of rebellion, towards my parents in an attempt to be unique from the rest of the family. Simulations were the first part that got my attention, especially with what could be done to achieve works of art with exceptional detail to aesthetics and concept delivery. The idea of changing abstract concepts into ones that a learner can easily fathom was strangely fascinating, and drew... A moment that changed my life...
The Advantages of Including Clinical Simulation in Nursing Education
6 pages (1500 words)
...simulation sessions that would summon their skills and knowledge. The manikin would serve as a sample patient that the nurses can attend to depending on the symptoms presented. High and low-fidelity manikins as well as skill and task trainers, virtual reality trainers, computer-based simulators and scenarios and even standardized patients comprise the simulation education package (Jeffries: 60). In clinical... ?The Advantages of Including Clinical Simulation in Nursing Education The great philosopher, Aristotle, once said, “What we have to learn to do, we learn by doing”. This quote has become the motto of many people especially those involved in Education. Although most people have been raised to learn...
Explain How Electronic Recycling will better the environment as a whole
2 pages (500 words)
...computer materials are recycled for reuse in the facilitation of communication and surveillance unlike the disposal of such electronic gadgets. Similarly, electronic recycling through computer simulation nurtures potential environmentalists concerned with the total protection of their surrounding irrespective of arising costs. In a symposium conducted by environmentalists and scientists, several issues emerged on the successes and failures of electronic recycling. According to (Zhang, 2011), the development of effective recycling techniques has resulted to the proper use of printed circuit boards (PCBs). This means success has been... Electronic Recycling Electronic Recycling Protection of the...
What is the current practice of applying simulation modeling in the oil and gas industries
3 pages (750 words)
...Simulation modeling is the process of creating computer models that represent the actual production and important logistics processes in the oil industry. The process not only considers the viability of the designed project but it is useful in the prediction of uncertainty such as weather in the oil industry. The aspect of uncertainty is incorporated into the models as random variable, these variables represents uncertain events such as equipment breakdown and destructive weather condition. The system depends on statistical distribution to determine frequency and patterns that determine the occurrence of uncertain events. Using simulation enables... Simulation Modeling In Oil And Gas Industries...
Simulation
4 pages (1000 words)
...Simulation Introduction Simulation is the use of an act in a bid to explain the aspects of another different act by means of representation emulation and imitation. In nursing and other health care professions simulation can be used to perform four major functions which include training/education, assessing to trainees, researching various phenomena in the field, and finally for the facilitation of a safe environment for patients or clients. In nursing these functions are achieved through a combined application aspects of role playing, use of low and high technology equipment, and application of real field work activities. The literature available... ?Running head: Assessment of Nursing Care Using...
Philosophy
10 pages (2500 words)
...computer simulation at least to an extent anyway, and this can offer some insight into the reality of our own world besides our dream worlds. The more realistic virtual reality environments allow immersion, navigation and manipulation (Rheingold, 1992). An illusion of ‘being there’ (telepresence) can also be effected using motion sensors (Encyclopedia Brittanica). A distinction is made between this simulated reality in which there is no awareness of the surroundings being simulated, and virtual reality wherein one is fully aware... The Relationship between dreams and reality in light of Descartes’ discussion in the first meditation Dream skepticism is one of the few philosophical lines of inquiry into...
Entrepreneurship Virtual Simulation Experience
7 pages (1750 words)
...simulation as you will train the servers. Research and product development since you can offer coffee variety. Ethics of the business where the shop may have to deal with some odd conducts from customers. Aspects relative to a music store Advertising and music marketing to reach customers. Human resource development in training the personnel’s who will sell the music. Operational strategy involves the introduction of computers and compact drives. The store name and logo are also determined. The business location is additional to its operations Aspects relative to a restaurant... Entrepreneurship Virtual Simulation Experience Food and Beverage Business Planning Business planning involves the strategies or ...
1 - 50 results of 500 items