StudentShare solutions
Triangle menu
Density Lab
1 pages (250 words)
Nobody downloaded yet
...Density Lab Conclusion Data Interpretation Density Lab is conducted for the purpose of determining densities of different substances after which the experimental data collected are compared to the densities of these substances found in literature. For one, the pine’s density as obtained in the experiment is 0.47 g/ml which falls within the theoretical range of 0.35 – 0.67 depending on the class of pine (which in this case is near the value of kind radiata at 0.48). Similarly, the experimental density of oak which is 0.75 g/ml is well within 0.6 – 0.9 and closest to the true values 0.74, 0.77, and 0.74 which are densities pertaining to American Red, American White, and English Brown oak woods... ...
Preview
Density experiment
2 pages (500 words) , Download 0
Free
...Density Lab Report Charnelle Palama and Tanya Ono (Group H) Chaminade This experiment aims at using the Archimedes principle to determine the density of post-1985 pennies. The experiment used water determined corresponding masses and volumes of pieces of pennies. This was then used to determine the pennies’ average density. The results yielded a significant relationship between mass and volume at ‘0.05 level of significance’ and a corresponding p value of 0.0009. The results also identified an experimental density of 7.54 g/mL for the pennies. This was different from a theoretical density of the pennies...
Preview
Population density
15 pages (3750 words) , Download 1
...density and its effects on the socioeconomic characteristics of a community Literature review 1 Co-relation between Human Populationand development The well-established link between population and community development (urban and rural) has long been subjected to different kinds of interpretations by different authors. As per the Malthusian theory, the population growth of any country or community can lead to scarcity of resources and a subsequent economic degradation and a decline in wealth causing widespread poverty (Malthus, 1807). However, the contenders to this theory opine that population growth is a condition that can be used favourably by educated classes to create new... technologies...
Preview
Density Lab Report
4 pages (1000 words)
Nobody downloaded yet
...Density Lab Report For the indirect determination of density of a pre-1985 penny, Archimedes’ displacement principle was utilized. When pennies were placed in the cylinder containing water, the increase in liquid level accounted for the displaced amount of water or the amount necessary to evaluate the density of the penny given the mass of a couple of pennies for each of five recorded sets. Density Lab Report Introduction A density of a substance pertains to an intensive property of matter which relates mass to volume, where such density equals mass (m) per unit of volume (v). Intensive...
Preview
Effects of Population Density
6 pages (1500 words)
Nobody downloaded yet
...Density and Noise on Individuals Introduction Population density is a socio-economic term that refers to “the number of peoplein a defined jurisdiction, in relation to the size of the area that they occupy” (Last 2002, 941). As in urban areas live greater number of people on a specific territory than in rural areas, urban areas have higher population density. In global scales, population density also varies significantly. Thus, for example, such countries as the Netherlands and Singapore are characterized by extremely high population density, while the regions of some countries (such as Russia, Australia, and others) have very low population density (Last 2002). Overall... , the population...
Preview
Population Density reserach paper
3 pages (750 words)
Nobody downloaded yet
...Density POPULATION DENSITY Population density is a measure that calculates the concentration of human in a particular area. When there is a lot of population in one place there are quite a lot of problems in the place, people fight for food and every other resources. There is a lot of competition as the resources are always in limited quantity in areas with dense populations. An area with dense but homogenous population has quite a better situation. The people all belong to the same kind and therefore, they learn to maintain status quo among them. They choose a leader unanimously and look for guidance towards that group that they have chosen. The limited resources are not even much... ? Population...
Preview
Sustainability and population density
5 pages (1250 words)
Nobody downloaded yet
...density Literature review Sustainability pertains to the safekeeping and prudent use of the various natural and environmental resources, for ensuring the security of the coming generations. Human population density has a direct bearing on sustainability, as changing population demographics affect exploitation of the per capita availability of the global natural resources. There are possibilities of exhausting the available environmental resources, while environmental degradation, as seen in the case of worldwide overuse of the carbon sink, has led to grave dangers to the global sustainable development, a problem further aggravated by a persistent rise... : Percentage of people living below the...
Preview
High density Plasma CVD
10 pages (2500 words)
Nobody downloaded yet
...DENSITY PLASMA CVD I start this article with the introduction to the Chemical vapor deposition (CVD). CVD is a chemical phenomenon of a material to deposit it on another material. This is done using thin films of the different materials. A typical CVD phenomenon includes the exposure of a material commonly in volatile format with the substrate which allows the reaction of those and obtains the desired result, deposit or exposure. During the process byproducts are also produced which are evolved as gas through the chamber of reaction. CVD is the process which is an essential component of various processes which include the powders, coatings, fibers and monolithic materials....
Preview
Volume and density
4 pages (1000 words)
Nobody downloaded yet
...density of objects again from empirical measurements and in the context of error propagation (Cornell). Experimental Data Table 1: Hollow cylinder measurements Height in mm Thickness in mm Inner diameter in mm 1 128.1 6.2 77.35 2 128.3 6.1 76.4 3 128.3 6.2 75.4 4 129.3 6.1 77.3 5 129.3 6.1 76.5 Mean value 130 6.1 77 Std. dev 0.5899... Lab Report Table of Contents Objective Experimental Data Data Analysis Results Discussion and Conclusion Works Cited Objective This experiment consists of two parts, the first part being computing for the volumes of several objects from measurements of its dimensions empirically as well as investigating error propagation; and the second part being the derivation of the...
Preview
Density of regular solids
3 pages (750 words)
Nobody downloaded yet
...Density of regular solids and liquids at room temperature Purpose The experiment was meant to determine the densities of some substances. Methods Direct measurement Displacement method Procedure The experiment was carried out in two phases: the first phase involved determining the density of fluids, and the second determining the density of aluminium using two methods; direct determination and displacement method. In determining the density of the fluid, the following procedure was used: i. A 10 mL graduated cylinder was cleaned, dried, and its mass weighed and recorded to the nearest thousandth. ii. The cylinder was filled to the 10.00 mL mark with the liquid... Whitney Garland College: LAB REPORT...
Preview
Population Density and Noise
6 pages (1500 words)
Nobody downloaded yet
...density and noise There is a phenomenal increase in population density of major regions in the world because of high birth rates. Population density is the extent of the number of populace in a unit area usually per square mile or kilometer (Connelly, 2008). This mostly applies to humans. This increase in population density has got undesirable effects both on the environment and individuals. This is so because most of these populations dwell in comparatively small urban areas (Connelly, 2008). This increase in population density has got a direct correlation to increase in noise. Noise can be defined as any sound that is unwanted. It is unwanted because it is unexpected... ? The effects of population...
Preview
Density of Fluids
1 pages (250 words)
Nobody downloaded yet
...density. This principle was developed and patented in United States (Jody, Daniels & Pomykala , 2003).. The following is a discussion of the density of fluids used and a brief description of those fluids According to the initial assignee of this patent, the separating solution should fall with a range of density. This range was set at 0.8 and 2.9 g/cm. After this the mixture or solids being separated then separate through floating and sinking (Allies... Separation of aluminum glass and plastic using fluids There are various methods used in the separation of mixtures in recyclingplants or companies. Among the commonly used methods is the use of float sinks which employs the principle of relative...
Preview
Density Lab Report
4 pages (1000 words)
Nobody downloaded yet
...Density Lab Report For the indirect determination of density of a pre-1985 penny, Archimedes’ displacement principle was utilized. When pennies were placed in the cylinder containing water, the increase in liquid level accounted for the displaced amount of water or the amount necessary to evaluate the density of the penny given the mass of a couple of pennies for each of five recorded sets. Density Lab Report Introduction A density of a substance pertains to an intensive property of matter which relates mass to volume, where such density equals mass (m) per unit of volume (v). Intensive...
Preview
Low density polyethylene
5 pages (1250 words)
Nobody downloaded yet
...Density Polyethylene Introduction Low-density polyethylene (LDPE) was first invented by Imperial Chemical Industries (ICI), UK in 1933.Since then technology has been improved to have currently two basic processes–tubular and autoclave for manufacturing of LDPE. ICI had employed the process of autoclave when they first commercialized the process in 1938. The tubular process was first invented by BASF in 1938 though it took another 15 years to commercialize the production processes. Cost reduction and product enhancement has been the goal of each manufacturer over the years. In recent years, another dimension of environmental aspect has been added to reduce...
Preview
Trade Union Density
10 pages (2500 words)
Nobody downloaded yet
...density continued to fall till 2009, and decline continued especially in the private sector from 20 percent in 1997 to 15 percent in 2009, which was due to the apathy... ?Trade Unions in UK: Past and Future Essay 02 June Contents Introduction 3 2 Factors Influencing Changes in Union Member Ship 3 2 Economics Factors 4 2.2 Political Factors 4 2.3 Industrial Factors 5 2.4 Internal Union Factors 5 3 Future of British Trade Unions 6 4 Conclusions 6 References 8 1 Introduction Employment relations and industrial relations are some of the key aspects which has shaped the global economy, including the British economy. Cordial industrial relations are increasingly important for the both the employer and the...
Preview
Length, mass, volume, and density
2 pages (500 words)
Nobody downloaded yet
...Density Lab report is characterized by a procedural undertaking of an experiment that examining a phenomenon. The experiment yields results that are then evaluated for the desired characteristics. The experimenting procedure is undertaken using a number of steps, all of which make up an objective, method, result and application. Objective – This defines the desired or expected outcome. The experimental procedure is carried to determine the underlying behavior or principle in a given scenario. In other words, all the other parts of the report are developed based on the objectives. What is to be achieved determines what method to employ in carrying out the research. Method... Length, Mass, Volume, and...
Preview
Volume and Density - Lab Report
7 pages (1750 words)
Nobody downloaded yet
...densities with the aid diverse measuring lab equipments. Method Experiment’s procedure entailed taking lengths and diameters readings of copper wire together with diverse cylindrical objects to compute their densities besides their volumes (Wilson & Cecilia 243). This was via tabulating four independent readings coupled with taking their mean as the final and correct reading. Results Regardless of the experiment carried out with high level of keenness, readings’ deviations were inevitable owing to the unintentional tools’ errors. Besides... Summary Sheet Objective The core purpose of this study is to measure diverse objects’ lengths, masses, which will be essential in computing their volumes and...
Preview
Determining the density of an irregular solid
4 pages (1000 words)
Nobody downloaded yet
...density of an irregular solid Steve Beckman WGU INT1 December 12, Determining Density of an Irregular Solid 0 Problem ment Challenge to the determination of the density of an irregular solid is poised to its non-conformity to the any three-dimensional object that are used in the functional determination of the volume of natural and synthetic three dimensional objects. An irregular object falls outside the circular, ellipse, triangular, square, and rectangular or sphere basic units used in the mathematical computation of object. From the microscopic point of view, any material usually has a specific arrangement of its atoms. The bonding between the atoms determines the strength... ? Determining the...
Preview
Measuring density of an irregular object
4 pages (1000 words)
Nobody downloaded yet
...density of an irregular solid Steve Beckman WGU INT1 December 12, Determining Density of an Irregular Solid 0 Problem ment Challenge to the determination of the density of an irregular solid is poised to its non-conformity to the any three-dimensional object that are used in the functional determination of the volume of natural and synthetic three dimensional objects. An irregular object falls outside the circular, ellipse, triangular, square, and rectangular or sphere basic units used in the mathematical computation of object. From the microscopic point of view, any material usually has a specific arrangement of its atoms. The bonding between the atoms determines the strength... Determining the density...
Preview
Error Propagation: Volumes Linearized plot: Density
4 pages (1000 words)
Nobody downloaded yet
...Density Introduction In lab experiments, errors emerge from numerous sources including variability of instruments, imprecision in observation and sample differences among others. Errors typically increase when the number of variables involved increases. In order to determine the average value of errors encountered, a thorough error propagation exercise is necessary. Error propagation entails combination of individual uncertainties as a means of determining the accurate value of an experimental error. Aside from error propagation, lab experiments also benefits from the concept of graph linearization. In most cases, a pair of variables under... Error Propagation and Graph Linearization in Volumes and...
Preview
The difference in vegetation density in burnt and unburnt
2 pages (500 words)
Nobody downloaded yet
...Density in Burnt and Unburnt Areas Introduction The main objective of the study was to measure plant species data by comparing the two habitats that include unburnt and burnt area using Mann-Whitney test.The plant species considered include Xanthorriea,Acacia pycnantha and Black rapier sedge.These study,enabled the determination of the difference in vegetation density between the burnt and unburnt areas Descriptive statistics Figure 1.Histogram indicating the frequencies of the two(Un-burnt and burnt) dependent variable In the two diagrams above (figure 1), the score distribution for un-burnt and burnt have different shapes. In this case, the Mann-Whitney U test can... The Difference in Vegetation...
Preview
The Effects of Population Density and Noise Paper - 460
6 pages (1500 words)
Nobody downloaded yet
...Density and Noise College The Effects of Population Density and Noise Human beings have a recorded history of thousands of years. During this time, we have multiplied in great numbers. Today the world population has reached over seven billion. This massive increase in numbers has made life difficult. The immense urbanization and enormous industrialization throughout the globe have turned the lives of people grim. Cities are turning into mere blocks of houses with very little space left for parks and recreational centers. Cities like Tokyo, Hong Kong and Mumbai are some of the world’s densest areas. Among other problems, the increasing noise pollution and the negative affect... The Effects of Population...
Preview
Trade union density has undergone significant decline since 1979
10 pages (2500 words)
Nobody downloaded yet
...Density Has Undergone Significant Decline Since 1979 Introduction Trade unions play a big role in the organization of workers anywhere inthe world. They are normally established to represent the workers in an organization or a group of organizations (Blandon, Machin and Van, 2006). Trade unions are important organizations since they seek to instil harmony in the employment environment. They are vital for the adequate representation of the workers’ interests and performance of fair managerial practices across all levels of employment. On behalf of workers, trade unions often negotiate wages, workplace policies and safety, work rules, rules governing hiring, promotion and firing... of...
Preview
The Effect of Rural Population Density on Socio-economic Characteristics of Rural Communities
20 pages (5000 words) , Download 1
...Density on Socio-economic Characteristics of Rural Communities Literature review 1 Rural Population Density Human population density (both urban and rural) serves as an important study tool, necessary to measure the balance between the total capacity of the physical environment necessary to support the perpetually rising global population, especially in the context of the developing or under developed nations. The studies on population density have primarily focused on the constantly increasing human population and subsequent impact of this increase on the physical environment and the resources available. The picture of an increasing population in developing nations... ? Effect of Rural Population...
Preview
Image contrast is normally described as proton density: T1-weighted or T2-weighted
3 pages (750 words)
Nobody downloaded yet
...density, T1-weighted or T2-weighted. a) Describe how images with the three different types of contrast are acquired with spin echo pulse sequences. T1 weighted images To achieve perfect TI weighted image weighting after the application of a 90° RF excitation pulse, the net magnetisation vector (NMV) is flipped into the transverse plane. T1 recovery occurs as nuclei give up their energy, and the NMV begins to realign with B0, thus regaining longitudinal magnetisation. Fat has a rapid T1 recovery time, and hence the T1 time of fat is short. Water, however, takes much longer to recover, and the T1 time... ?T1 and T2 Department: Assignment Questions Q1: Image contrast is normally described as proton density, ...
Preview
Impact of Social Heterogeneity and Population Size and Density on Social Relations
10 pages (2500 words)
Nobody downloaded yet
...Density on Social Relations Introduction Urbanisation is one of the most significant and glaring facts of modern life that has influenced the social relations to a great extent. From a sociological standpoint, a city is a large and dense settlement of heterogeneous individuals. According to Louis Wirth (1938, p.1), the recency and rapidity of urbanisation in the United States has led to its acute urban problems. Large numbers consistent with individual variability render human relations superficial and transitory. Density leads to the contradicting coincidence of close physical contact and distant social relations along with accentuated friction... Impact of Social Heterogeneity and Population Size and...
Preview
Image contrast is normally described as proton density, T1-weighted or T2-weighted
3 pages (750 words)
Nobody downloaded yet
...density, T1-weighted or T2-weighted. a) Describe how images with the three different types of contrast are acquired with spin echo pulse sequences. T1 weighted images To achieve perfect TI weighted image weighting after the application of a 90° RF excitation pulse, the net magnetisation vector (NMV) is flipped into the transverse plane. T1 recovery occurs as nuclei give up their energy, and the NMV begins to realign with B0, thus regaining longitudinal magnetisation. Fat has a rapid T1 recovery time, and hence the T1 time of fat is short. Water, however, takes much longer to recover, and the T1 time... T1 and T2 Department: Assignment Questions Q1: Image contrast is normally described as proton...
Preview
Magnetic flux density
5 pages (1250 words)
Nobody downloaded yet
...Country with High Mortality: Cameroon Country with High Mortality: Cameroon Health disparities are increasingly creating economic burdens to communities, families, as well as health care systems for different nations (Newman, 2007). Across the world, chronic diseases, and infant mortality have continued affecting people of all races. In recent years, there has been increased research on the causes of these deaths with the focus shifting on the impact of health disparities in developing nations. According to Newman (2007) Africa is the most affected region when it comes to health disparities. Newman contents that that globally, one death in five is from a communicable or infectious disease... with High...
Preview
Justice in the distribution of marketing service (Walmart) for the population density in Arkansas state in 2000 and 2010
5 pages (1250 words)
Nobody downloaded yet
...Density in Arkansas in 2000 And 2010 The Arkansas state has a total population of 2,673,400 people; this population comprises 1,304,693 males and 1,368,707 females in total. The total number of people under the age of 5years in Arkansas State is 181,585. Among this, 5 to 9 years is 187,224, 65 to 74 years is 198,334, 75 to 84 years is 129,193, and 85 years and above add up to 46,492. The total number of people who are 18 years and above is 1,993,031 and this comprises 955,418 males and 1,037,613 females and this indicates that there are more females of 18 years and above than males in the Arkansas state (Rice 20... ). The average life expectancy in Arkansas is 76.0 years. This period is...
Preview
Introduction of tall buildings and urban development. criticised on the high density and energy issue.understand ecological desi
10 pages (2500 words)
Nobody downloaded yet
...density living in compact urban environments will only be acceptable if privacy, security and lifestyle operations are assured. The Menara Mesiniaga is one of the first intelligent buildings in the Klang Valley, making maximum use of natural ventilation and careful orientation in relation to the sun to achieve temperature and light conditions that are conducive to working comfort (Mesiniaga, 2006). EDITT Tower... ? Land is the most precious resource of any country in fact even the world, it is the only resource that cannot be replicated nor manufactured. Vertical cities or vertical expansion of cities is possibly one of the most innovative solutions that can be develop to reverse the damage humans has...
Preview
Nutritional Sciences Research Method class(the effects of physical activity and calcium intake on bone mineral density (BMD) in Saudi women based on DXA measurements)
21 pages (5250 words)
Nobody downloaded yet
...Density (BMD) In Saudi Women Based On DXA Measurements Department Date Abstract Low bone mineral Density (BMD) is a major public health concern across the world, however, among the Saudi women, it is a crisis. Adequate intake of dietary calcium coupled with weight bearing physical activity has been shown to reverse bone loss. However, the mechanism of this effect is not known. Therefore the purpose of this study is to investigate the effects of physical activity and calcium intake on bone mineral density (BMD) in Saudi women based on DXA measurements. This paper will also establish whether WHO defined T-scores for BMD established... The Effects of Physical Activity and Calcium Intake on Bone Mineral...
Preview
Urban developments of Doha prior and after 1970, (spread out / urban pattern, land use zoning, building height, density, ) 1900 1950 (pearl economy), 1950 -1970 (gas and start of globalization, 1970 to present (effect of globalization)
10 pages (2500 words)
Nobody downloaded yet
...densities, extensive road networks as well as architecture that was built using bricks. Although there was an initial public administration... Topic: Urban developments of Doha Introduction Anyone visiting Qatar almost eighty years ago would have seenlittle more than a small community of people who engaged in pearl fishing and this trade had been affected negatively when Japanese pearls were introduced into the market. The economy of Qatar, which was a British protectorate with some of the harshest climatic conditions in the globe, seemed to be collapsing imminently. Nonetheless, oil was discovered at the beginning of 1940 and this was the beginning of a breakneck journey in the direction of...
Preview
The essay title is: Trade union density has undergone significant decline since 1979. Critically evaluate the reasons for this change in both the public and private sector during this period, and assess the likely effects of the recent downturn in the eco
10 pages (2500 words)
Nobody downloaded yet
...density percentage at 30% from the 50% in 1979. This means a decrease of about 5.5 million in membership and a parallel decline in density membership, with density referring to the percentage of the workforce belonging to a trade union vis-à-vis the entire UK workforce (Gospel et al 2005, p. 2). Since Tony Blair became Prime Minister in 1977, union membership is steady at seven million, at a 70 60 50 40 30 20 % 1950 1960 1970 1980 1990 2000 year Fig. 1 Trade Union Density (Source... UK Trade Union The decline of trade unionism in the UK which began in the late 1970s is a notable event in the history of labour in the country. Union membership has perhaps dwindled to just a mere...
Preview
Trade union density has undergone significant decline since 1979. Critically evaluate the reasons for this change in both the public and private sector during this period, and assess the likely effects of the recent downturn in the economy and the potenti
10 pages (2500 words)
Nobody downloaded yet
...density has undergone significant decline since 1979. Critically evaluate the reasons for this change in both the public and private sector during this period, and assess the likely effects of the recent downturn in the economy and the potential for future growth in trade union membership levels. Table of Contents 1. Introduction 3 2. Trade union density in private and public sector since 1979 4 3. Recent recession and trade unions 9 4. Conclusion - Potentials for future growth in trade union membership levels 10 References 12 1. Introduction In the context of the global market business operating in various industries have to change their operational structure... Trade union...
Preview
Economic Geography
1 pages (250 words)
Nobody downloaded yet
...density in different ways. Trends of population density variation and distribution also vary according to the races that occupy certain regions or places. States occupied by blacks, for instance, have high population density. The spread of the blacks in America is limited compared to other races because of influences of political reasons. Seclusion of blacks before passing of laws that stopped the discrimination of blacks contributed to their concentration... in particular states. The first map shows the population distribution of the blacks in America by 1990. According to the department of commerce, there is a high concentration of blacks in states as Georgia, South Carolina, Florida,...
Preview
Paraphrase
1 pages (250 words)
Nobody downloaded yet
...density ratio and stiffness to density ratio both at reduced environmental impact and cost. I started by the limiting of almost a hundred materials considering the best of the two methods listed above. Later, I plotted a number of graphs guided by the finest (both the strength to density ratio and the stiffness to density ratio) at the minimal ecological impact as well as minimum cost. Based on the selection technique that was employed, high carbon steel and low alloy steel were the only two materials that were left. Therefore, I consider the two above to be the ideal materials for pedal crank.... Insert Insert Grade Insert Insert Selection Techniques Explanation There are a range of techniques that can...
Preview
Project 1
2 pages (500 words)
Nobody downloaded yet
...Density Lab Purpose: This lab is intended for to investigate the principles of mass, volume, and density and to relate the principle of buoyancy in comparison to candy bar density and to understand the importance of accuracy in measurements and applying mathematical principles to scientific procedures. Laboratory Materials List The Projects in this course require special materials. Some of these materials are found in the Chemistry 1 Lab Kit and some will need to be provided by you, the student. Before doing a project, gather all the items you will need for that specific project and out them on a clear work space. Student Will Supply... Project Evaluation 31 Chemistry SCIH 031 062) Project Candy Bar...
Preview
Please use your own words to explain these questions
2 pages (500 words)
Nobody downloaded yet
...density of the energy were enhancing as the plates moved closer and he concluded that, there is a minimal force that is operating between the plate. Negative energy density To create an energy density of that is negative one is forced to make the vacuum energy to be at zero. This results to the plates to rely on force originating from externally (outside the plate). Role played... Casmir effect Question Casmir effect Is an attraction force that act between two uncharged plates. The force is normally small. This is due to fluctuation of quantum vacuum. With reference to quantum theory vacuum have imaginary particles that are always at constant motion. Casmir during the experiment observed that the...
Preview
CHEM 121 pre-lab
2 pages (500 words) , Download 1
...DENSITY 1. The definition of density is ___Mass__________ per __Unit Volume___________. The word "per" indicates the arithmetic operation ___Division________________. 2. When using a graduated cylinder you read the volume at the bottom of the __Meniscus_________________. It is ______Less________ accurate than a pipet. (more or less) 3. In an experiment performed as in Part A, the following data were collected: mass of vial 20.0138 g mass of vial + water 29.9368 g... ______________________________________ Drawer number _________ Lab Day and Time:____________________________ ________________ Experiment 2: PRELAB ASSIGNMENT FOR DENSITY...
Preview
Scientific American article about cholesterol
2 pages (500 words)
Nobody downloaded yet
...density lipoprotein could protect the heart against stroke risk or heart attack and low density lipoprotein increased the risk of the two. Researchers recently then decided to do research on both these lipoproteins to find out if changing the levels of LDL or HDL could affect the risk of getting heart attack or stroke. The goal of the research was to find out if lowering low density lipoprotein or increasing the levels of high density lipoproteins had any effect on the occurrence of heart attacks or strokes1. This is because, in the past, people used to think that altering the level of any... Scientific American Journal on Cholesterol What was the goal of the work? In the past, people believed that high...
Preview
Archimedes Principle
2 pages (500 words) , Download 1
...density, or rather specific density of parent material determines whether an object sinks or floats when immersed in water. Specific gravity is the ration of a material’s density to that of water. Practically, the physical properties of volume, density, and mass are related as d = m/v. Experiments that study the floating and sinking properties of different materials are practical application of Archimedes Principle (Smith 15). According to the principle, volume of liquid displaced when an object is immersed in water is directly related to the weight of the immersed object. Below are tabulated results indicating numerous physical properties... of different materials determined through a...
Preview
Reprt
4 pages (1000 words)
Nobody downloaded yet
...density of each liquid sample by the density of the standard substance, distilled water in this case. Goals The aim of the experiment was to determine the specific gravity of two liquids using a hydrometer. Introduction: The specific gravity of a substance, represented by Gs, is defined as the ratio of the density of that substance to the density of distilled water at a particular temperature (40 C). The value of Gs is a numerical value with no units and does... not depend on which system of units is used since it is a ratio. The specific gravity of liquid is a significant parameter in industrial processes, and it is a factor in most equations that involve weight-volume relationships. For...
Preview
Theory
4 pages (1000 words)
Nobody downloaded yet
...Density log This type of log is majorly attributed to its sensitivity to porosity. This is the property which enables it to function the way... Theory 1 Explain the physical principle of the tools for: a. SP log The Spontaneous Potential log is sensitive to electrical charge. In this same regard, it functions by measuring electrical potentials between depths in oil boreholes together with a voltage exhibited on the surface. Hydrocarbon suppression reduces the response which can be realized by the SP log. b. GR log The Gamma Ray log uses gamma radiation to measure the characteristics of rocks or sediments in a well. It functions well even in steel or concrete walls because of it being sensitive. c. Densit...
Preview
Quantum Oscillator Problem
1 pages (250 words)
Nobody downloaded yet
...density, |ψ10|2. Mathematica has the Hermite polynomials built-in. The quantum oscillator wave functions are given in equation 6.57; these wave functions are not normalized. The α in these equations is...Figure 6.11 shows a plot of the 10th excited state probability density, |ψ10|2. Mathematica has the Hermite polynomials built-in. The quantum oscillator wave functions are given in equation 6.57; these wave functions are not normalized. The α in these equations is 𝑚 𝜔ℏ(HW Problem 6.36 and in-class work). The argument of the Hermite polynomials in equation 6.57 is listed as “x” but you will want to use 𝑢 = √𝛼𝑥 as the argument when you are actually write down or program t...
Preview
Quantum in physics
4 pages (1000 words)
Nobody downloaded yet
...density Approximation (LDA) Exchange correlation (XC) is the relationship between different... ?Quantum Physics 498330) Introduction Quantum physics is the science that deals with finite particles of energy called quanta. These units of energy are supposedly the final divisible form of energy and its ideas have been postulated in the Quantum Theory. (Belloni et al, 2005)This theory briefly states the following 1. Energy comes in tiny but distinct units and is never continuous. 2. The particles forming the energy unit acts as particles and waves. 3. The motions of these particles are haphazard. 4. The position and momentum of a particle cannot be measured at the same time. (Belloni et al, 2005) Local...
Preview
Lipoprotein metabolism
2 pages (500 words)
Nobody downloaded yet
...Density Lipoprotein (HDL) Describe The Structure and Function of High Density Lipoprotein (HDLS) In Lipoprotein Metabolism in Man Structure of High-Density Lipoprotein (HDL) HDL belongs to a group of heterogeneous lipoprotein that contains about equal amounts of protein and lipid. The particles of HDL are characterized by small size (Stroke’s diameter of 5-17 nm) and high density (>1.063 g/mL). The various subclasses of HDL vary in qualitative and quantitative content of apolipoproteins, lipid transfer proteins, lipids, and enzymes, resulting in density, shape, antigenicity charge and size. Most of...
Preview
Misconceptions in Science
4 pages (1000 words)
Nobody downloaded yet
...density because of its physical structure. The strands in Styrofoam create many airtight voids. These voids do not let liquid pass through and they decrease the density of the overall structure. The density of the Styrofoam is less than the force of the displaced water in the bucket, so the Styrofoam will float. The same is true in theory for a cardboard box. The corrugation within the box creates voids, again resulting in a low-density material. The unknown in this prediction is the structure of the cardboard relative to water resistance. Most cardboard boxes would start out floating, but the porous nature... An empty Styrofoam box will float in a bucket of water. Styrofoam has a very low density...
Preview
Quantum
4 pages (1000 words)
Nobody downloaded yet
...density approximation (LDA) Local-density approximations and the Perdew-Burke-Ernzerhof generalized gradient approximation are widelyused by physicists and chemists for electronic structure investigation of different body-systems. Local-density approximations (LDA) refer to “a certain class of approximations implemented to the exchange-correlation (XC) energy functional in  DFT, which are dependant on electronic density value at each point in space” (Parr and Weitao, 1994). In accordance with numerous researches in the field of DFT, local approximations can be yielded to the XC energy. Nevertheless, it is relevant to note that widely used local approximations were found... in the homogeneous...
Preview
Applying the Background and Methodology of the Research Process to Problems in Health Care
2 pages (500 words)
Nobody downloaded yet
...Density ment of the Problem The United s of America is one of the countries of the world that has a rapidly increasing population characterized by cultural diversity and demographic variations. The increase in human population over the last five decades has caused population pressure characterized by depression of resources (Robert, 2004). One of the sectors that has been adversely affected by this high population density is health and medical services. The provision for health and medical services has become more complex in areas with low population density, therefore limited medical access. To increase the provision and access to these primary needs, it is important... Teenage Pregnancy and Population...
Preview
Planet Earch
2 pages (500 words)
Nobody downloaded yet
...density of sea water is one of the important processes that control the motion of the ocean. 18. Temperature and density have an inverse relationship. When the temperature increases, the gap between water molecules increases which is also known as density decreases. If the temperature of water decreases its density increases... Brief Answers 5. 6. 7. 8. 9. mid latitude cyclone 10. The low pressure 14. Antarctic circumpolar is an oceanic current that moves from west to east around Antarctica and while west winds drift is the dominant circulation feature of the south ocean and syderdrups. 15. Temperature, heat and potential temperature and Pressure and depth. 16. Temperature, potential and heat. 17. The de...
Preview
1 - 50 results of 500 items
Contact Us