StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Individual Design Report - Assignment Example

Cite this document
Summary
Title Page Acknowledgements Summary Statement of Design problem The focus of the paper is to create a design that will lessen the effects of salt water into the aquifer – that it, water extraction and at the same time, a remedy for the extent of salt water intrusion…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.5% of users find it useful
Individual Design Report
Read Text Preview

Extract of sample "Individual Design Report"

Download file to see previous pages

Pumping fresh water out causes the increase in the degree of salt water intrusion, hence a sustainable and practical method of fresh water extraction mechanism must prevent the furtherance of such phenomenon. This design is a practical application of the mechanisms design by Dr. Bhattacharya and Dr. Basack where, a practical design for groundwater extraction was created specifically for arid regions using qanats that aims to, aside from extracting fresh water from aquifers, would create least, if not negligible, damage to the natural underground water system.

Solution Both proponents of the theory based their mathematical equation to the equilibrium between saline water and that of the fresh water in the aquifers, where an interface can be calculated using the Ghyben-Herzberg relationship with the assumption of (1) homogenousity; (2) separation by a sharp interface; and (3) absence of mixing zone. Aside from using the equation and the assumption above, it is important to consider the theory of up-coning where the interface (where salt water and fresh water meets) lowers due to the extraction of fresh water (which is less dense than salt water).

As the pressure above is considerably reduced, the shape of the rise of the saline water is conical and once the conical mound has been reached, the saline water mixes with the fresh. Given this scenario, it is vital that we determine the height of the cone created and from there, we can establish the amount of water to be extracted at a certain amount of time before fresh water is replenished in order to a avoid salt water intrusion. Recommendations (development and testing) Determination of the number of qanats to be used and the stratification of the bed rock present and the soil decomposition should be a preliminary resort before the implementation of the project.

List of Contents Introduction Background Detail The water crisis is a looming peril that not only the third world country will have to face, but is becoming a worldwide phenomenon at that. Water crises such as shortages and the lack of access to potable water resource suggest lack of governance and an overall mismanagement of use. But this is just the tip of the iceberg, the huge bulk of those affected by the water crises are the residents of poor countries who are gulled by the total lack of accessible water as well as the presence of water-borne disease.

These are the places that suffer shortages due to the topography and the natural features of the place where it can easily be infiltrated with wastes. Even if the water crisis is the symptom of another problem, it should be given top priority. A proposal for immediate resolution is the development of sustainable water extraction facilities, especially in aquifers proximate to salt water sources such as the sea. Why the design was undertaken The main objectives for the development of a reliable water extraction system aside from effectively drawing out water from an underground source is the removal of the contaminants and prevention of salt water intrusion deeper into the fresh water aquifer.

There are also other important aspects such as remedial operations. Under a remedial system, it is to be kept in mind that the levels of contaminants present in an aquifer should be reduced otherwise removed. Based on the different objectives of

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Individual Design Report Assignment Example | Topics and Well Written Essays - 1000 words”, n.d.)
Retrieved from https://studentshare.org/family-consumer-science/1405393-individual-design-report
(Individual Design Report Assignment Example | Topics and Well Written Essays - 1000 Words)
https://studentshare.org/family-consumer-science/1405393-individual-design-report.
“Individual Design Report Assignment Example | Topics and Well Written Essays - 1000 Words”, n.d. https://studentshare.org/family-consumer-science/1405393-individual-design-report.
  • Cited: 0 times

CHECK THESE SAMPLES OF Individual Design Report

Radiological Impact of Routine Discharges

  Discussion A European pressurized reactor (EPR) is a third-generation nuclear reactor design known as a pressurized water reactor (PWR).... Still, safety issues continue to hound this new design despite claims that it is significantly safer against any potential terrorist attack than presently operational reactors.... The EPR design uses several safety measures against accidents or meltdown resulting from either a terrorist attack or a natural calamity likes in Fukushima....
12 Pages (3000 words) Report

DB Design From Existing Dataset

This report "DB design From Existing Dataset" focuses on a project that aims at modeling a database to fit the data retrieved from BBC ontologies.... nbsp;The final design is a robust system.... With the knowledge of how ontologies operate, a sufficient foundation had been created that was used to design the database to hold the program ontology.... The design is convincing enough in attempting to model linked data using a relational database....
20 Pages (5000 words) Report

Comparing Qualitative Research Designs

The methods of data collection in this design may include observations, interviews, and appropriate written documents.... This report "Comparing Qualitative Research Designs" discusses qualitative research that involves the application of different designs.... The case study approach is used when the sample is small and the researcher intends to develop an in-depth understanding of the subject....
7 Pages (1750 words) Report

BIM in Civil Infrastructure Planning, Design, Construction and Management

"BIM in Civil Infrastructure Planning, design, Construction and Management" paper critically reviews the presentation made by Ian McGregor on the topic BIM in civil infrastructure planning, design, construction, and management who is a product manager.... It provides support for construction, design, and management.... To begin with, the author has highlighted BIM technology as a technology that can be used to design various items....
10 Pages (2500 words) Report

Information Communication Technology

This report "Information Communication Technology" presents a plan design that is among other designs that Nunes has adopted in his project.... It is worthwhile noting that, Nunes has based his project on certain design considerations by identifying some issues that he needs to consider a priority.... Notably, in its design, the plan has considered alternative power supplies such as portable power supplies....
11 Pages (2750 words) Report

NFCPowered Mobile Application for Taking Students Attendance in Class

Essentially there are two kinds of methodology employed for the project which are the structured system as well as a design methodology and Object-Oriented methodology.... This report "NFCPowered Mobile Application for Taking Students Attendance in Class" presents the software created for the student....
19 Pages (4750 words) Report

How Information Technology can be Applied to Electrical Engineering

hellip; Decision making is one of the complex activities an individual engages in.... This report "How Information Technology can be Applied to Electrical Engineering" investigates information tools and resources used in Electrical Engineering.... The report starts with a brief introduction to Information Technology, then an overview of various components used....
13 Pages (3250 words) Report

Network Design For Public Relations Company

"Network design For Public Relations Company" paper contains a network design and also the requirements for the design for the network.... The purpose of the network is to provide recommendations to the public relations company for the development of an overall network design.... From the outline of the company's needs, this task describes the network design, summarizes the different approaches that are being proposed for IT solutions, and proposes a new approach with some of the positive aspects of prior work....
8 Pages (2000 words) Report
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us