StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Evaluating the Project and Specification for Costing - Coursework Example

Cite this document
Summary
This coursework "Evaluating the Project and Specification for Costing" focuses on conducting a cost-benefit analysis for a management plan. It is critical as it facilitates the manager to deploy a new GIS system and operations for enhancing the functionality and capability of an organization. …
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER96.5% of users find it useful
Evaluating the Project and Specification for Costing
Read Text Preview

Extract of sample "Evaluating the Project and Specification for Costing"

Download file to see previous pages

In the context of business planning, the factors associated with cost and benefits are critical and must be understood. Similarly, cost-benefit analysis is also critical in the context of projects associated with GIS engineering and management. Scenarios This report is associated with cost/benefit analysis for two scenarios. The first scenario includes an interest rate of 4%, which indicates it as a best-case scenario, while the other scenario is the worst-case scenario with an interest rate of 10%.

Specification for Costing Cost of five workstations with minimum configuration of Quad-core processor, 2GB RAM and 250GB Hard Disk is illustrated below: Cost of single Workstation * 5 = ? 1300 * 5 = ?6500 Cost of upgrades in Year 3 and 6 = 2 *?650 * 5 = 2 * ?3000 = ?6000 Licensing Cost for GIS Software Cost for Year 1,2,4,6 = ?10000, Cost for Year 3, 5, 7 = ?3000 Data Purchasing Cost Total cost of Map Purchase = ?19500 Employment Cost Total costs of Salaries increasing at 3.5% per annum are as follows: Year 1 = ?

195,000, Year 2 = ?202,000, Year 3 = ?209,000, Year 4 = ?216,000, Year 5 = ?224,000, Year 6 = ?231,000 and for Year 7 = ?239,000 Conversion and Miscellaneous Cost Conversion Cost (1 time) = ?5000 (Given) Miscellaneous Cost = ?3000 (Given) Benefit Total Savings in the context of employments as salaries are as follows: Year 1 = ?195,000, Year 2 = ?202, 000, Year 3 = ?209,000, Year 4 = ?216,000, Year 5 = ?224,000, Year 6 = ?231,000, Year 7 = ?239,000. Efficiency Savings (Increasing at the rate of 4.5%) For Year 1 = ?

15000, Year 2 = ?15675, Year 3 = ?16380, Year 4 = ?17117, Year 5 = ?17887, Year 6 = ?18691 and Year 7 = ?19532. Scenario 1 ( Interest Rate 4%) The first scenario demonstrates the implementation of a GIS project with an interest rate of 4% which is considered as lowest when compared to normal. The interest rate of 4% (0.04), Fig 1.1 illustrates similarity for both cost and benefits in the graph over the period of 7 years, with the cost-benefit ratio of 1. Moreover, the net present value is also demonstrating 1st and 4th year of implementation is negative for the projects.

In comparison with both the cases, consequent years 2 and 5 are highlighting recovery and constant positivity for the net present value. Figures for implementation of the net present value over 7 years are calculated as 16.54. Moreover, the profitability month starts from the 2nd year till the 5th year with implementation outweigh is a cost that concludes to benefit. Both the implementation present value and the net present value at the end of 5 years are positive. For this reason, productivity does not require increment as the net present value is already showing healthy progress at the end of year 7.

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“CourseWork (the dead line is on the 26 of march ) i will be able to”, n.d.)
Retrieved from https://studentshare.org/finance-accounting/1411712-coursework-the-dead-line-is-on-the
(CourseWork (the Dead Line Is on the 26 of March ) I Will Be Able to)
https://studentshare.org/finance-accounting/1411712-coursework-the-dead-line-is-on-the.
“CourseWork (the Dead Line Is on the 26 of March ) I Will Be Able to”, n.d. https://studentshare.org/finance-accounting/1411712-coursework-the-dead-line-is-on-the.
  • Cited: 0 times

CHECK THESE SAMPLES OF Evaluating the Project and Specification for Costing

GIS Acquisition

The inclusion of risk assessment defining that the project will not be able to... The activities that are involved in cost benefit analysis are: Estimating all the cost Identification of all benefits Evaluation of economic value for irrefutable profit evaluating impact on the staff and organization evaluating Risk Examining results The implementation cost for the GIS includes acquisition and maintenance for software, hardware, maintenance, data capture, and training....
10 Pages (2500 words) Essay

DYNAMIC AIRCRAFT

Marshall, it was paramount for the engineers to indicate which type of specification to the supply manager since it was a rule in the company.... The laboratory submitted its findings a week later which primarily focused on the ability of the samples to withstand high temperatures for long periods of time; the fundamental specification required by the engineers....
4 Pages (1000 words) Assignment

Service Management: Project Planning and Implementation

The preparation of the brief is the first document prepared for the project and outlines the direction for the whole project.... Adherence to brief also allows benchmarking for the project and sets higher standards for all contractors involved.... Such an atmosphere reflects positively on the project and assures the client throughout the project of the competence and motivation of the team on site.... All stakeholders in the project need to decide the specifications of all deliverables in the project and make sure that standards are met....
9 Pages (2250 words) Assignment

The Department of Education and Training

PRINCE2 method is a very effective as it helps the project manager to organize, manage and control the project to deliver the product successfully on time and within the limited budget.... They can be as follows-HighMediumLowCosmeticIn order to implement the request for change an approval is required from the project manager.... The decision depends on whether it is a change to a configuration item that has already been baselined and if the work can be done with the tolerances of the current plan, this would help the project manager in making decisions about implementing, if not it can be referred to the project board....
2 Pages (500 words) Essay

Projects and Their Management

The phases will include: business specification, system design, product development, testing, system implementation and maintenance and evaluation.... Business specification will entail elicitation and assessment of the user and system requirements.... PT project will follow the conventional software process that is typical of all IT projects....
6 Pages (1500 words) Essay

Employing a Cost-Benefit Approach in Implementing GIS in an Organization

This paper will outline the steps involved in adopting an acquisition model for GIS implementation, examine in detail one stage in the acquisition process and discuss the procedures involved in system evaluation and benchmark testing as they apply to GIS implementation.... ... ... ... The main objective of implementing GIS in an organization is to construct a business case for the proposal of GIS acquisition....
10 Pages (2500 words) Assignment

Manufacturing Process: Analysis and Specification

This paper 'Manufacturing Process: Analysis and specification' aim at providing details on some of the design for manufacturing changes that would be made to the valve body.... Further, the report gives an outline of how the valve body can be manufactured.... ... ... ... A pressure relief valve has been designed to open, to get rid of excess pressure, and to reclose, to prevent the excess flow after normal conditions have been met for safety purposes....
8 Pages (2000 words) Coursework

Projects in Controlled Environments and Project Management Body of Knowledge

RINCE2 gives a description of procedures for coordination of activities and people in a project, how to supervise and design the project, and the next step to take if adjustments are needed in the project when it does not develop as planned.... Through close monitoring, the project can be performed in an organized and controlled manner.... All the management responsibilities and roles that are carried out in a project are completely described and are flexible because they can be adapted to befit the skills of the organization and the complexity of the project....
10 Pages (2500 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us