Support for High-Definition IP Cameras - Assignment Example

Support for High-Definition IP Cameras For the DeVry security system, there are quite a numberof cameras that can be used and implemented in its security system. However, basing n all their requirements, I believe that the best camera that the organization could use in its network surveillance system is the AXIS P5534/-E, Camera, which is very effective. The Camera fits the organization for quite a number of reasons which I will elaborate on. With the institution being a school that needs an advanced security system, this is the best IP camera in the market currently.

It is economical but also very operational. AXIS P5534/EAnother core advantage of the camera is the fact that it uses the Ethernet cable as the core suppliers of power, thus fitting the university requirements (PoE). It is applicable both in the indoor and outdoor settings. It has a 360o span of view, equipped with the rotating camera, thus making it possible for strategic positioning within the school halls, cafeteria, pavements and other areas that require adequate surveillance. It has HDTV options, providing high quality full HD images and videos, which is excellent for adequate surveillance.

The organization should purchase up to 200 cameras, the same as the one prescribed above, which will be linked to one network, but will be segmented into individual units, with each having its own identity, through the use of its IP address, though they will all be managed by one administrator, which will constitute of the organization’s server, and a minor technology department that will be developed by the institution specifically for surveillance. These cameras will be operated with their location.

For instance, the engineering school section of camera will all be operated by one person, though anyone within the surveillance office, or registered in the security management website, which will also be developed alongside the department, can access them from home or anywhere using the internet. The network management will decide on where the views can be accessed by the students within the school network and premises or if they will not have any security clearance to access any of the cameras.

The cameras will all be positioned in areas where they cannot offer conflicting views, through the use of different angles of view, to prevent redundancy and duplication of images, view or videos. This will also prevent blind spots within the view. With these cameras being connected to computers, the storage uplink is definitely certified. The cameras also have temporary storage more than 1 GB. With these cameras being bulb shaped, they can be placed on ceilings or walls, and this reduces the rack space consumed by the cameras.

For ceiling cameras, minimal space will be used, yet the wall cameras still save on space greatly due to the ergonomic stand. The cameras will be grouped depending on location as earlier pointed out. Cameras within the same wing will use a common switch for distribution. The access layer of the system is the computers, and the mini-server within the surveillance department. This design meets the Cisco hierarchical design requirement. ReferenceAxis Communication. (2011). Axis HDTV and megapixel network cameras: See what you’ve been missing.

Retrieved on 5th Feb, 2011 from http://www.axis.com/files/brochure/bc_hdtv_megapixel_45194_en_1112_lo.pdf