StudentShare solutions
Triangle menu

Computer Numerical Control - Essay Example

Not dowloaded yet

Extract of sample
Computer Numerical Control

End to end designs of the components have been highly developed and the computers have been widely used in their processes and this have included such things as computer language being widely incorporated within the systems that use computer numerical control (Krull, 40).
In the production of Padlocks by the Tri-Cycle company the use of the computer numerical control has been assessed and the following results were seen. One of the benefits of the system was that it could be used continuously for twenty fours and this have ensured that the production of the products can be continued continuously without facing any disruptions and hindrances. This is very beneficial to the company because the company can enjoy customer faith because the company ensures that the products are available in the market throughout the year and can meet any kind of demand that could be necessary at any time (Reintjes, 120).
It is also beneficial to the company because the company does not need to employ highly skilled personnel to operate the machines. This have ensured that the company does not need to spend a lot of its resources in employing highly skilled personnel and at the same time ensure that the production of the padlocks is continued and also keep the quality of the products high levels. This is very beneficial to the company because while saving on the consumer faith, they also benefit largely to the fact that the system ensures that the products are of high quality and hence very beneficial in the market outlook of the company (Reintjes, 123).
When an improvement to the machines or to the product is necessary, the company does not need to do an overhaul of the entire system but only need to change the computer language. This ensures that the padlocks produced can be changed on their branding, size and type without having necessarily changed the entire system. This is very beneficial to the company because the company does not to spend a lot of resources when they need to change the outlook of the company's production system. The company also does not need to involve a lot of technical to change the system as semi-skilled workers can work on the changes that are required for the company to make the necessary changes that are required to change the company's products outlook (Krull, 40).
The company has however found it a bit costly to maintain the machines and this have sometimes been very costly even in marker terms and this means that the company has compromised its products when some parts of the machines needs to be changed or repaired. Although the cost is not as high when compared to the technicians that have been employed to maintain the machines, it has been costly to the fact that the company needs to buy the materials to be used in the maintenance and the repairing of these machines. This have led to the company's products being substandard at times when the machines are on the down and some maintenance needs to be effected with immediate action and these parts have to undergo a long financial procedure through the various departments that are required (Reintjes, 119).
The machines mostly being those that needed the skills of the past engineers have also been noted to have little workforce that is related to the modern type of engineers. This has been noted to affect the continuity of the machines' operation and at ...Show more

Summary

Computer Numerical Control (CNC) popularly known as Numerical Control (NC) is the automatic control that is integrated into mechanical tools and equipments used in manufacturing mass products. These automated instructions are abstractly encoded into a program that is used as a language by the tools…
Author : eyundt
Computer Numerical Control essay example
Read Text Preview
Save Your Time for More Important Things
Let us write or edit the essay on your topic
"Computer Numerical Control"
with a personal 20% discount.
Grab the best paper

Related Essays

Stub Shaft Manufacturing
Computer Numerical Control can be regarded as smart approach for the manufacturing of stub shaft. The tools required for the manufacturing of the stub shaft through CNC includes cutting tools of different sizes. The Computer Numerical Control is program through which the tool shall operate under numerical commands.
2 pages (500 words) Essay
Manufacturing Bearings
The design and manufacturing of bearing is crucial as it is the most sensitive and critical element of the machine. Any damage to the bearings will further damage the rotating parts of the turbine and generator. The bearing is load-baring element therefore it is high-temperature zone due to friction; the high temperature of bearing is controlled through lubrication.
4 pages (1000 words) Essay
Wheel Centre Manufacturing
The fabrication of the wheel centre through machining process is complicated task. However the fabrication of the wheel centre through casting is relatively simple. The fabrication of the die is however a major challenge, but it is recommended that the die shall be designed with certain margins, and the end product through casting shall be machined to edit such tolerances.
2 pages (500 words) Essay
Premount Base Manufacturing
The pre-machining checks should focus primarily upon the strength and characteristics of the material, whereas the post-machining checks should focus upon measures to minimize roughness. The Computer Numerical Controls were developed to improve the machining characteristics of the manufacturing process.
2 pages (500 words) Essay
QFD (Quality Function Deployment)
methods of production of industrial commodities and products; and requires that ability to plan the practices of manufacturing, to research and develop the tool, processes, machines and equipment, and to integrate the facilities and systems for producing quality products with
5 pages (1250 words) Essay
2500
The design and manufacturing of bearing is crucial as it is the most sensitive and critical element of the machine. Any damage to the bearings will further damage the rotating parts of the turbine and generator. The bearing is load-baring element therefore it is
4 pages (1000 words) Essay
The manufacturing of a Premount Base
The pre-machining checks should focus primarily upon the strength and characteristics of the material, whereas the post-machining checks should focus upon measures to minimize roughness. The Computer Numerical Controls were
4 pages (1000 words) Essay
History of Numerical Control development
d States air force is credited for the development of numerical control.1They saw the need of developing methods of manufacturing that are more efficient for modern aircraft. With the coming of the Second World War those components that were used for fabricating jet aircraft
2 pages (500 words) Essay
MGMT305 U4 IP
With the computer-aided designs (CAD), the boards are appropriately designed before being sent to the cutting facilities. Thereafter, an 85% to 90% complete board
5 pages (1250 words) Essay
Reseach Paper proposal
Furthermore its made dream work out as expected. By including the workstation in machining industry begins a huge upset, CNC (Computer Numerical Control) this is non-stop innovation which is gotten unrest all mother
1 pages (250 words) Essay
Get a custom paper written
by a pro under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Your email
YOUR PRIZE:
Apply my DISCOUNT
Comments (0)
Rate this paper:
Thank you! Your comment has been sent and will be posted after moderation