Reliability Standards&Regulations - Essay Example

t establishes a framework for eco-design requirements for Energy-using-Products which aims to contribute to sustainable development by increasing energy efficiency and protecting the environment while increasing the security of the energy supply. ‘Action should be taken during the design phase of EuP since it appears that the pollution caused during a product’s life cycle is determined at that stage, and most of the costs involved are committed then. If products have a standby mode, this is likely to be affected with a maximum consumption level in this mode.

Standby mode is used where the equipment needs to be reactivated remotely or is required to carry out a function as displaying a clock. The maximum power consumption in standby mode depends on the equipment’s function and 1 watt decreasing to 0.5 watts is being proposed for products that use standby as a re-activation function only.. Televisions, microwave ovens, computer monitors, etc will need to be designed to ensure that this is not exceeded. This requirement has far-reaching implications as every function within a product circuitry will need to be reviewed to determine how the power consumption can be reduced.

Many products cannot be completely shut down as the off-switch disconnects the input power supply from other parts of the equipment but does not disconnect the power supply from the mains. This is termed “Off-mode” and it is proposed to restrict power consumption of equipment in this mode initially to 1 watt and, two years later, to 0.5