The frame is a structure that holds the sprinkler components together .The frame styles may be of low profile, flush standard as well as the concealed amounts. The frames types depends on the areas that should be covered, type of hazard to be protected and the visual effects that may be required. Thermal linkage controls the release of water from the sprinkler systems. The linkages hold the cap in the right place and prevent water from flowing out of the pipes. (Wallace, and Webber, 2004, p. 285).
The function of the cap is to provide the water tight seals over the sprinkler orifices that are held in place by the thermal links. In case the thermal fails to function, the cap is released and water finally flows from the orifice. Orifice refers to the opening in the water pipes at the base of the sprinkler valve. The opening in the water pipe is at a place where the water comes from which is about half an inch in diameter .It varies from the larger hazardous areas to smaller ones in the sprinklers systems. The detector is used in splattering the water streams from orifice to the pattern that is efficient for suppression of fires (Wallace, and Webber, 2004, p. 285).
It is therefore important for all organizations to install the sprinklers systems within their organizations so as to protect themselves as well as their organizations from fires. Sprinklers are of different types, and therefore should be used as per their ...
Cite this document
(“Skip navigation links BFS 3440-07B BUILDING CONSTRUCTION FOR FIRE Essay - 5”, n.d.)
Retrieved from https://studentshare.net/miscellaneous/374569-skip-navigation-links-bfs-3440-07b-building-construction-for-fire-protection-bfs3440-07b
(Skip Navigation Links BFS 3440-07B BUILDING CONSTRUCTION FOR FIRE Essay - 5)
“Skip Navigation Links BFS 3440-07B BUILDING CONSTRUCTION FOR FIRE Essay - 5”, n.d. https://studentshare.net/miscellaneous/374569-skip-navigation-links-bfs-3440-07b-building-construction-for-fire-protection-bfs3440-07b.
Preplanning a building enhances firefighters’ tactical proficiencies in anticipating the behavior of fire; it helps in preparing for search and rescue of fire victims in the event of a fire outbreak which would definitely improve firefighter safety and survival
walls on the other hand are walls that are made of fabric materials that are of lightweight and they are more combustible than bearing walls, unlike the bearing walls they do not prevent the spread of fire in the event of an outbreak. In bearing walls, Fire can only spread
ue mill construction is a special type of heavy timber developed in the textile mills of New England which utilized heavy timber column and beams with cast iron connectors to cover joints where fire might hold, fire barriers enclosing opening between floors, and most
These departments employ and then train their staff technically for few years.
High rise structure fire is more dangerous and cause tremendous deteriorations. This type of fire is the greatest challenge for the occupants and fire fighters. Usually, the
High expansion foams can have expansion factors as high as 1100. Our concern is on the low and high expansion types.
Low expansion foams are used to extinguish burning flammable or combustible liquid spill and tank fires by
It has been found however, that Halon agents, not only contributes to the depletion of the ozone layer but also causes potential harm to people exposed to this substance. According to the Material Safety Data Sheet of a fire extinguisher with