The current status of the project is that, all components are ready for installation except the external power source and the wireless camera, which will discussed in some other section later. Another pending thing is that the program code needs to be configured and the memory location has to be kept ready to run the program when the robot is powered externally.
Testing the robot involves testing each component individually first. If the individual components are working properly, then it clears the path for combining them into the robot in the last stage of this project. This ensures that when the robot components are assembled together in the final of the project, the robot will be ready to be controlled from the computer in the wireless mode. Many components were tested during the course of this project, some of the important ones are highlighted in the sections to follow.
I applied different various levels of voltages by using DC power supply to drive the stepper motors. The goal was to make the motor and all other components run using 4V since I intended to use external power source at the final stage of the project. When I applied 4V to one of stepper motors it was working properly. However, when 4V was applied to both of the motors, the short circuit light in the DC power supply started shining, indicating a short circuit in the system. This happened because of limited current and hence short circuit happened. To solve this problem 4V was connected to the stepper motors from different power sources separately to avoid the short circuit.
This device tracks the voltage from the input to the output. The input from the DC power supply is 12V, which will be reduced into 5v by passed it through the 7805 regulator. The regulator is used to maintain the constant voltage of 5 volts in the circuit. This 5 volt entered the MAXX232 and the radio
From the previous experiments results, where the control on the stepper motor was done successfully in both directions, it is now actually possible to use the robot components such as stepper motors ‘Sanyo Denki Model 103H546-0440’, MOSFETS, RS232, wireless device and…
Huddleston states that it is important to distinguish two levels at which our grammatical categories need to be defined. They are: the language particular level and the general level. Both of them help to learn a language and distinguish the difference either between various parts of speech or languages.
Mogen Cheng English 101 Jun, 6, 2011 Writing an essay As a non-native speaker and writer of the English language, I used to make a lot of mistakes when writing an essay for school. One reason for this is because there are so many differences between the Chinese language and the American style of writing in English.
Long sentences can be used to convey a lot of information and short sentences to stress a point. Starting sentences with different opening words will help to hold the interest of the reader. Unity, coherence, a topic sentence and adequate development are the different features of a paragraph (Purdue OWL, 2007, para 3).
I have several techniques for proofreading my written documents that might be helpful.
The first step is to jot the document down on paper. This gives one the chance to change, add, or delete thoughts and ideas. After writing a rough
The author states that a professional writer with experience in the order’s field and the availability to complete the necessary research within the given time period is assigned to each customer as the order is placed. The writer works individually with the customer to assure instructions are understood and requirements are met.
In this report I will explain the method of making a robot that has the ability to move in different directions through wireless communication. In addition to constructing the program, which has the ability to control the robot through the PC, to complete the
To write a school assignment, students must read and understand the instructions and follow them thoroughly, and afterwards, they should also revise, edit, and proofread their papers.
The first part of writing a school assignment is reading
In an effort to try and completely concentrate on my writing assignments, I always try to remove all possible sources of potential distraction from my environment. This normally includes shutting down my cell phone and computer while working on the assignment as well as turning down the television.
I believe that I have learned the most effective and efficient process from class discussions, readings, notes, and activities in writing my argument because the latter provided tools and techniques that will prevent me from becoming a zombie writer
3 pages (750 words)Essay
Hire a pro to write a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Apply my DISCOUNT
Got a tricky question? Receive an answer from students like you!Try us!
Let us find you an essay for FREE
Contact us via Live Chat, call us at +16312120006or send an email to firstname.lastname@example.org