Computer Project # 2 - Essay Example

Therefore, by utilizing the minimal value of increment constant of 100 millimeters, calculate the maximum value of the force X utilize in this problem and subsequently, find the value of W in this problem. Therefore, to be able to obtain the correct form of a diagram representing the problem above, let us first assume that the force applied to move the rod is approximately X , while the Therefore by using a simple diagram to represent the problem above, a diagram like the one drawn below is thus obtained ; The diagram of the rod is drawn using the FBD application or the drawing can also be done by utilizing the free hand drawing method.

The diagram shows all the force X, the value W this includes all the details explained in the problem equations and the values described are also included where appropriate in the drawn diagram. The diagram is as shown below; Based on the diagram above, the point A is shown to be 100 millimeters away from the point B. while also the point B is further assumed to be of at the same point as point D. Thus the point B is considered to be a fixed point and also the point D is considered to be a fixed point in this static problem and is therefore regarded as the pivot point.

Where as the distance from the point D to the point where the external force is applied at point P is about 400 millimeters away from the fixed point B and also point D. Therefore to be competent of calculating the problem above, the required calculation procedures must be employed as necessary. These calculations procedures are furthermore included in the results in order to be utilized in the determination of the solution through utilization of the computer software programs. The main equations used are shown with inclusion of brief explanations.

The initial X stands for the force applied when moving the rod from