Data plot was taken from the results of the liquid limit test, where the x-coordinates or abscissas are the calculated moisture contents and the y-coordinates or ordinates are the penetration. The data points included in the plot are P1 (63.37, 14.13); P2 (66.26, 18.90); P3 (69.58, 19.45); and P4 (70.44, 22.15). The trend line or the best fit line was automatically fitted and the equation of the line was generated. From the figure, the equation of the best fit line is: y=0.9613x – 46.148. From step (10) of the laboratory procedure for the determination of the liquid limit, the theoretical value of moisture content which would produce a penetration of 20 mm is the liquid limit of the soil. Hence, when y in the above equation is substituted with 20, the value of the liquid limit (x) may be calculated algebraically as; y = 0.9613x – 46.148. 20 = 0.9163x – 46.148 0.9163 x = 20 + 46.148 x = 68.81 ? 69% - the liquid limit of the soil The value of the liquid limit obtained above is verified below by manual plotting. Manual Plot of Moisture Content vs. Penetration Plastic Limits Test No. 1 2 3 4 Container No. ...
Cite this document
(“Determination of the liquid limit, plastic limit and plasticity index Lab Report”, n.d.)
Retrieved from https://studentshare.net/other/22467-determination-of-the-liquid-limit-plastic-limit
(Determination of the Liquid Limit, Plastic Limit and Plasticity Index Lab Report)
“Determination of the Liquid Limit, Plastic Limit and Plasticity Index Lab Report”, n.d. https://studentshare.net/other/22467-determination-of-the-liquid-limit-plastic-limit.
The author states that in performing the jump test requires high levels of movement efficiency. To achieve movement efficiency, there is contraction of muscles in a synergistic way to ensure intra and inter muscular coordination to generate maximum power. The performance of wingate test measures peak leg anaerobic power and anaerobic capacity.
The history of the sensor is also highlighted and it accounts for the development of the sensors to what is contemporary limit switches. It coming into place is also discussed under the inventor which is coupled with the how it is applied in the industries as well as the industries where the kind of sensors are engaged.
As such, structural failures of airfields and roads, as well as damage resulting from settlement of foundation are due to failure to achieve the desired soil compaction. But what is soil compaction? Soil compaction refers to the mechanical process of densifying a soil.
Some of the exercise tests that can address the physiological functions are Vertical Jump test, Wingate test, Bench press test, 60-kcal time test, and 100km time trail.
In performing the vertical jump test requires high levels of movement efficiency. To achieve
However, in one plane, normal stress value may be of a maximum value. Such a plane is referred to as the principal plane or maximum principal plane. On the other hand, the normal stress along this plane is referred to as the principle stress or the maximum principle
There are several laboratory tests more often performed in order to determine different characteristics of soils. These characteristics are important when it comes to designing the foundation and earth structures. This paper focuses on
it (LL) refers to the water content at the division between the liquid and plastic state while the plastic limit is the water content at the part between plastic and semisolid state (Cripps et al, 2006, 228). For plasticity index, it is defined as the numerical difference
3 Pages(750 words)Lab Report
GOT A TRICKY QUESTION? RECEIVE AN ANSWER FROM STUDENTS LIKE YOU!
Let us find you another Lab Report on topic Determination of the liquid limit, plastic limit and plasticity index of a cohesive soil for FREE!