StudentShare solutions
Triangle menu

Construction, operation and associated circuitry of common - Assignment Example

Nobody downloaded yet

Extract of sample
Construction, operation and associated circuitry of common

It is ordinary in that it is indirect. This find a lot of application in the fluorescent lighting, neon lighting or even rope. This can laso be described as a form of backlighting. There are other approaches that could be utilized to compelement this form of lighting. For example, close-to-wall lighting or soffit could be utilizing to bring out an appealing texture, although this has its limitations. More often than not, the effect is dependent upon the specification of the light that have been used. Recessed lighting is the widely applied featureand has fictures that are attached to the ceiling to look appealing. The forms of lighting can utilize the narrow spotlight beams and could even be mae with reflectors.
There are also the cases that the downlights consisting of internal reflector specifications could be designed to accommodate the A lamps. Furthermore, the downlights could be LED, fluorescent, high density discharge or indecadent (Theraj, 2001).
Another form of lighting is the track lighting. This form of lighting enarned popularity because it was easirt to install , compared to the recessed form of lighting. Its fictures are now also made decorative and can also be attached to the walls. The current popularity of these form of lighting rests upon the its ability to use low voltage, yet they assure safety in addition to the fact that they are decorative. Their circuits are fed by master transformers through the fictures on the rod, as opposed to the approach where evet light is fed with a set of trabsfeormers.The third form of lighting is cable lighting, which simply a modified form of track lighting.Here, the lights hang from clipped cables that rest on tension.
Nevertheless, illuminated ceiling is also another form of lighting but was popular in the 1970s. This form of lighting relied on the panels of diffusers that were suspended below the fluorescent lights. It finds a lot of application in all the ...Show more
Cite this document
  • APA
  • MLA
(“Construction, operation and associated circuitry of common Assignment - 1”, n.d.)
Retrieved from
(Construction, Operation and Associated Circuitry of Common Assignment - 1)
“Construction, Operation and Associated Circuitry of Common Assignment - 1”, n.d.
  • Cited: 0 times


On the other hand, the Downlights should be made compact fluorescent. High bay fom of lighting should be made to have ahigh density discharge and this could also serve an indirect light for spaces…
Author : olgaswaniawski
Save Your Time for More Important Things
Let us write or edit the assignment on your topic
"Construction, operation and associated circuitry of common"
with a personal 20% discount.
Grab the best paper

Check these samples - they also fit your topic

Construction, operation and associated circuitry of common
An Indoor 5-a-side Pitch. In the most generak sense, the interior lighting copmprises fluorescent design. On the other hand, the downlights should be made compact fluorescent. High bay form of lighting should be made to have a high density discharge, and this could also serve an indirect light for spaces that are raised.
3 pages (750 words) Assignment
Utilisation of Electrical Energy
Utilisation of Electrical Energy Artificial lighting is currently used all over the world and its use is predominantly non-homogenous. The most commonly source of power used in powering artificial lighting is the electric power, though, in some under – developed countries, there is a widespread use of fuel based lighting.
10 pages (2500 words) Assignment
Construction and operation of aircraft fluid systems
The turbine engine generates high-speed gas, which provides the power for the pneumatic system. The external air passes through multi stage axial compressor, which is driven by the engine turbine. From the multi stage compressor the pressurized air is delivered to the engine turbine.
12 pages (3000 words) Coursework
Construction and operation of aircraft fluid systems
Some of the fluids used in aircrafts to transmit power include nitrogen, oil, and air. Air which is a commonly used medium of transmitting power in aircraft pneumatic systems has a number of properties which make it suitable for use. An ideal fluid for use in a pneumatic system is one that is non-toxic, chemically stable, non-flammable, does not contain corrosive materials, is readily available and does not support combustion ( 2013).
12 pages (3000 words) Assignment
The project management in the construction and operation of a restaurant
in order to sustain in the market. Project management helps the organization in this regard to find out the solution for these problems in a scientific manner. The timely finish of successful projects requires an understanding of both the technical and human resource components of project management.
19 pages (4750 words) Assignment
Common Decency
One suggestion for this scenario is to assist the disabled customer in getting into the function room and moving some tables and chairs so that this particular individual has enough space for freely move around the room. 2. The communication techniques used by the staff of the hotel, including those at the front desk and at Ballroom A, were very courteous.
2 pages (500 words) Assignment
Utilisation - Elecrical engineering
The lighting system in an office building has characteristic of high efficacy, glare ability and colour rendering. To achieve this, low pressure mercury lamp is sufficient to produce these requirements. This type of system is also known as
4 pages (1000 words) Assignment
Operation management
ompasses the responsibility of the business operations being as efficient as possible so that minimum resources are utilized in order to meet the requirements of the customers. Operation management is concerned with controlling and executing the process through which inputs in
12 pages (3000 words) Assignment
Likewise, exterior walls have the function in separating the house’s interior from the outside, the exterior walls effectively block the weather as they are often suited with
1 pages (250 words) Assignment
In large projects, exaction works are done by machinery. Workers working in the trenches and basements may not have a proper site of the machine, and hence there is a risk of accidents occurring.
1 pages (250 words) Assignment
Comments (0)
Click to create a comment
Let us find you another Assignment on topic Construction, operation and associated circuitry of common for FREE!
Contact us:
Contact Us Now
FREE Mobile Apps:
  • About StudentShare
  • Testimonials
  • FAQ
  • Blog
  • Free Essays
  • New Essays
  • Essays
  • The Newest Essay Topics
  • Index samples by all dates
Join us:
Contact Us