StudentShare solutions

# Static Equlibrium - Lab Report Example

## Extract of sample Static Equlibrium

lance clamp being mis–oriented by tightening the screws pointing in upper direction resulting in an unstable system that won’t balance as required, measuring the mass of the meter with clamps, or forgetting to include the mass of the clamp and its weight hunger when calculating the torque.
To more accurately get the results, some adjustments have to be made on the system. Additional loosening of the lines and developing of further theoretical techniques that will enable calculating and system ...Show more

## Summary

In this case, the algebraic sum of the net force acting on the meter stick, according to the results, is not equal to zero (Hernández). Also, the algebraic sum of the…
Author : kskiles
Save Your Time for More Important Things
Let us write or edit the lab report on your topic
"Static Equlibrium"
with a personal 20% discount.
Grab the best paper

### Check these samples - they also fit your topic

Velocity Distribution of a Circular Air Jet
The difference, (P0-P) varies with the square of the fluid velocity and density, , of the moving fluid. The relationship is P0-P =1/2 air v 2 Since the Pitot-static tube cannot measure the local velocity at a point because P0 and P are not measured in the same places, it the experiment has used a smaller pitot-static tube to reduce the error.
8 pages (2000 words) Lab Report
Static equilibrium and the requirements of this principle
The objectives for carrying out the static equilibrium experiment are:
1. To examine the static equilibrium of a system of forces of different magnitudes acting at different angles.
2. To compare the experimental results with those obtained by computing the resultant force.
3. To compare the experimental result and the calculated result with those obtained by the graphical method.
9 pages (2250 words) Lab Report
Static Equilibrium
Through the experiment, a number of measurements indicated in an appropriate table and later the values calculated. The final results found is shown at the results table that proceeds
5 pages (1250 words) Lab Report
Lab vectors and statics
The study was a success. Algebraically was found to be 0.252N at an angle of 56.3 degrees. The theoretical value of is zero. Physical quantities can either be vectors or scalar. Scalar quantities are represented by only their magnitude while both
4 pages (1000 words) Lab Report
Lab Discussion
2 The uncertainty coefficient of kinetic friction for the varnish material had the least amount of uncertainty. This is because its values were clustered very tightly and
1 pages (250 words) Lab Report
Friction
There are two types of friction called kinetic and static friction. A static friction force (fs) acts on an object at rest while kinetic friction (fk) acts on moving
4 pages (1000 words) Lab Report
Friction
Errors were also due to the inherent roughness and uneven surface of the wood. There were also foreign impurities on the woods surface such as dust. Other sources of errors were from the calibration of the sensor. Data Table with
4 pages (1000 words) Lab Report
Lab report
In addition, this will allow for further exploration of the energy viewpoint of rotational motion. The dynamic and static moment of inertia was different for both experiments. The torque applied produced the same energy for both the longest and
4 pages (1000 words) Lab Report
Sports psychology The influence of reduced visual information on static and dynamic balance
Their response to various light intensity were noted and analyzed. A significant relationship between visionary information and the rate of swaying was analyzed and the data upon
6 pages (1500 words) Lab Report
Thermodynamics and Fluids II Laboratory tests and report
The Pitot-static tube, therefore, is a flow velocity meter that measures fluid velocities in localized point; they do not take an averaged velocity across the larger section. Figure 1 is schematic diagram of the
5 pages (1250 words) Lab Report
Hire a pro to write