StudentShare solutions

# Lab Report Example

## Extract of sample

For ohmic resistors, the ratio of voltage to current is constant.
The battery was connected to the resistor then the wire extended to the DMM. At the DMM, the wire from the anode was connected to the DMM and then the other one from the cathode was also connected to the DMM. After the resistance was varied and a set of values for voltage (V) and current (I).
The two equations from section 1-2 and 1-3 suggest that R=V/I. This may have been because the DMM was faulty. The voltage for all the resistors in section 2-4 was 7.9V because they were all in ...Show more

## Summary

The main reasons why the experiment was carried was to know how to measure current using ammeter, understand how to get total resistance in parallel and series. Also find out the relationship between voltage, current and resistance and finally know what an ohmic resistor is…
Author : josianne37
Save Your Time for More Important Things
Let us write or edit the lab report on your topic
"Lab report"
with a personal 20% discount.
Grab the best paper

### Check these samples - they also fit your topic

Lab report
The change in temperature is attributed directly due to increased in emission of greenhouse gases, largest concentration of which is carbon dioxide. The increased emission arises from human activities in the transport and energy sector (US Environmental Protection Agency).
3 pages (750 words) Lab Report
Lab report
Name Instructor Course Date Lab report Following the field work in wabashiki wetlands rivers cape, which was conducted in order to establish the types of the soils found the texture, the composition, and the porosity of the soils. The study was undertaken in groups of between 4-8 people; where each was required to pick two samples.
3 pages (750 words) Lab Report
Lab Report
Calcium phosphate has greater healthy benefits. Most of the people suffering from tooth decay opt for homemade procedural toothpaste using calcium
1 pages (250 words) Lab Report
Lab report
Another related objective was to apply equations for basic projectile motion in determining how high a rocket can fly. Since launching the model rocket, this is considered a projectile motion influenced by height of launch pad,
3 pages (750 words) Lab Report
Lab report
The parabolic movement is the path traced by an object vertically, with constant acceleration, while the movement horizontally is at a constant velocity. The initial velocity and the projection angle determine
2 pages (500 words) Lab Report
Lab report
For the first cycle, the mass of the water alone is the mass of the crucible lid and hydrate, less the mass of the crucible lid and residue after heating. That gives 22.678 – 22.460 = 0.218. The mass of the hydrated salt is the mass of the crucible lid and hydrated salt, less
1 pages (250 words) Lab Report
Lab report
o calibrate the pressure transducer and then perform an uncertainty analysis and compare your pressure transducer calibration to the manufacturer’s calibration. 1. Excite the pressure transducer, with a voltage of 10v. The figure above had J17 and J18 as AO (Analog Out). It
5 pages (1250 words) Lab Report
Lab report
The results showed that the resistance were 0.0088 Ω and 0.003 Ω. DMM was used to measure the resistance of the small board resistors and the values recorded in table 1. Then the value of the 100 Ω resistor was varied by gathering a range of values of V
3 pages (750 words) Lab Report
Lab report
The main aim of the experimental design was to assess and understand the different types of instruments used, for instance, the orifice meter, Rotameter, and positive displacement meter. The
3 pages (750 words) Lab Report
Lab Report
From this mode, the shortest side of the triangle was represented by the distance between thumb nails (D), while the longest distance represented the distance from the ruler
2 pages (500 words) Lab Report
Hire a pro to write