StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Acoustic Emission Refers to the Waves of the Ultrasound and Sound - Essay Example

Cite this document
Summary
The paper "Acoustic Emission Refers to the Waves of the Ultrasound and Sound" states that the differences in the steps of fracture in different substances ought to be studied via laboratory experiments. Stiffer substances can produce larger emissions rendering the detection of damages in bones…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.8% of users find it useful
Acoustic Emission Refers to the Waves of the Ultrasound and Sound
Read Text Preview

Extract of sample "Acoustic Emission Refers to the Waves of the Ultrasound and Sound"

Insert Introduction and Definition Acoustic emission (often abbreviated as AE) refers to the waves of the ultrasound and sound that are normally yielded following internal changes/ deformations in a substance due to forces that are external. It is basically those waves of sound that a substance emits after fracture or deformation that in turn yield energy of stress. These produced waves of stress result to small motions on the molecules on the surface as they move to the substance surface from the location of the crack/ event/ deformation. The stress waves can be detected by instruments known as AE sensors and the substance is normally left un-impacted since the energy emanates from the location of the occurrence and therefore there are no requirements for any energy from the outside environment (Jolly, 78). One of the most powerful means used in ascertaining the substance’s (those succumbed with stress) internal alterations and tendencies is the acoustic emission (AE) testing. The tool basically an efficient method of determining the changes caused from the breaking of fibers, cracks elongations, other instances of on-going destruction taking place in Substances that are stressed, and so on, by simply detecting and changing into electric impulses these waves of sound produced. In other words, this is simply to allude that substances which are under some stress usually scream or talk and the AE testing tool comes in handy in ‘listening’ to these sounds and noises (Scruby, 124). Brief History The pioneer AE testing was performed by the U.S Navy in 1961 in the industry of the Aerospace. The goal of this study (hydrostatic testing) was to determine the Polaris rocket’s efficiency and a decision was later struck to employ equipment for the analysis of the level of sound, a tape recorder and contact microphones upon the detection of sounds that were audible. Additionally, at the Testing Station for the National Reactor in the onset months of 1965, the AE was successfully put into use by surveyors who were striving to find ways of ascertaining the nuclear reactors’ coolant losses. From that time onwards, the acoustic emission has been used with much success in monitoring things such as the wear of tools, wears in engines, failures in civil structures, growth of fatigue, the integrity of structures and the escalation of tear in laminates of composite kinds (Scruby, 200). Monitoring of Weld Changes in temperature, when welding is taking place, usually cause between the base material and the weld stresses where in certain instances there are observed small cracks. In 1969, Dr. Jolly discovered that significant bursts and the signals with levels that were low were respectively connected to cracks that were more sizeable and micro-fissures. He was experimenting on detection and monitoring noise in the background using accelerometers and welds of steel with inclusions that had been previously determined. The ASTM E 749-96 is currently employed a standard technique of monitoring the acoustic emission of welding that is continuous (Jolly, 90). Evaluation of the Integrity of Cherry Pickers/ Bucket Truck This technique is presently employed in the inspection of components such as the pins and the pedestal though in the past it was predominantly used and purposed in the examination of only the boom portions. During inspections procedures, the acoustic emission examinations follow the pioneer process of visual checks and if need be, consequent examinations are conducted in the form of ultrasonic inspections, dye penetrant or the magnetic particle (Davis, 377). Gas Trailer Tubes AET is important as it offers the option of in-situ examinations therefore deleting the need to disengage and dismantle tubes as is the case in hydrostatic re-testing. In this method, an exceeded pressurization of 10% is conducted with each tip of the tubes connected to the sensors of acoustic emission at any filing station. During the course of the procedure an acoustic system with numerous channels is used to detect and map the locations of the source with other regions thought to be source locations equally evaluated with the ultrasonic inspection. The tube is disengaged following the confirmation of defects. Another merit of the AET over the hydrostatic testing is that in AET errors that are less serious are detectable unlike in hydrostatic testing where examinations are unable to detect deformations only until they break the tube. These examinations are focused on locating cracks of fatigue that are longitudinal due to the enormous stresses in the tube’s circumferential leaning (Davis, 411). Bridges Applications for the monitoring of bridges predominantly use the acoustic emission technique. This is so since the AE can without ceasing detect deformations that may have occurred from destructions and additionally gather information without needing lanes to be closed or bridges shut down. Along the same vein, it is common to find the flow of traffic being utilized to load/ stress the bridge in order to accomplish acoustic emission examinations (Davis, 418). Aerospace Structures Most of the structures of the aerospace are made up/ assembled from very light materials that are supposed to withstand huge loads and this make up essentially implies that most of the components can hence only withstand minor damages before they fail to function. In the end therefore, inspections for damages are very vital but then again, these parts are often closely packed during assembly which in turn renders access for the necessary inspections very demanding. The AET has come up with the solutions for this mayhem with applications that monitor the well-being of the structures of the aerospace and sensors that can be strategically placed in accessible regions that are far from the locations that are prone to destructions. The Wing Leading Edge Impact Detection System of NASA, which was engineered to inform the officials of NASA of happenings like the effect of the foam sprayed insulation that destroyed the leading wing of a space vehicle upon launching resulting in destruction during re-entry into the atmosphere of the earth, is partly designed from principles of acoustic emission (James, 345). Others The technology of acoustic emission is also used in a plethora of other fields such as in material research like during substance properties breakdown, the behavior of damage, and the mechanisms of damage. It is also applicable in the composites of matrix polymers reinforced by fibers especially components reinforced with fibers of glass like the fan blades and in quality assurance and inspection procedures like tests for starch and the processes of drying wood. It is equally essential in the location and examination of leakages taking place in different parts such as stream lines, small valves and tank bottoms in real time and the in the examinations rocket motors and car tanks of the railroad. Apart from these, the AE principle can be used in electric transformers to detect and verify position of high voltage releases and in the past few months, hybrid or wireless AE techniques have been useful in the monitoring of environments, applications of the aerospace and in civil infrastructures (James, 365). Detection Sensors of acoustic emission are basically piezoelectric in nature in that they can change deformations/ changes/ mechanical energy/ force/ stress/ pressure into electricity/ voltage and the AE sensors are therefore normally employed in touching, shocking, flexing or vibrating measurements (James, 400). Pre-Amplification Piezoelectric sensors normally pick up signals of the range of the microvolt, that is to say, signals that are of very low voltage and in attempts to make these weak signals important in extra analysis they are put through numerous steps of filtering. These steps select certain signals which are then amplified for continued analysis. These steps require an equipment platform with parts that condition the signals (McMillan and Mark, 24). Data Acquisition and Storage The signals are consequently selected and transformed into numerical values, by ADC (Analog to Digital Conversion) parts whose rates are high and that are available commercially, that are digital for further computerized analysis. These equipments allow rates of selection as high as a mega sample per second (1MS/s). The information is then put through I/O digital equipment following this sampling and conversion into digital formats. The equipment conducts some more selection and filtering and then finally delivers the information to another machine such as a computer for analysis. A digital input/ output machine is that which conveys information to or from a peripheral equipment or computer with each transfer signaling an input into equipment and an output from another (McMillan and Mark, 26). Potential Future Applications for Acoustic Emission Energy One of the many possible future applications of the acoustic emissions is during the awaited break of the femur in actual time during the arthroplasty of the hip that is not cemented. A series of examinations, monitored using the acoustic emission and authenticated with the method of measuring the strain of the full field, have been conducted involving the insertion into the femora of implants of the hip using a load machine that is hydraulic. The use of sensors embedded on the implant and the femur marked the end of the test with results indicating that the sensor that was mounted on the femur produced greater sensitivity to destroy sources. In as much as the experiment promised good use in the future, more research is yet recommended with additional authentication make sure that the system is strong and show that the mounting of the sensor can be conducted outside the body on the implant that has superior reliability. Moreover, confidence can be improved and a better surrounding for mounting that impacts on the signal propagation of the AE realized by performing cadaveric studies (Ansell, 312). The AE can also be utilized in bones that are osteoporotic and the employment of surgical equipment such as screws in their handling. In order for full performances of the designs to be achieved, there is the need to completely tighten screws that are not lockable but care must be taken since too much torquing can destroy the bone in the event that the material is stripped by the screw tip threads. A pioneer study showed that the sensor of the acoustic emission that is fixed on the screw driver can identify the start of destruction and therefore used as an alarm for the user to immediately halt the loading and avoid the pull out of the threads of screws (Ansell, 413). In clinical settings the AE could prove useful especially during the diagnosis of fractures of the scaphoid with the sensors able to be used on the outside around the sick and the scaphoid. In all application instances, it is important to note the sensors’ positioning and application with the produced signal required to move to the sensor from the injured area. In daily uses such as with concrete, composites, metals, and so on, sensors are either coupled with cyanoacrylate after bonding or simply coupled after they have been mounted on the surfaces (McMillan and Mark, 31). To make sure that the sensor does not affect the process of operation during surgical procedures, the sensor is integrated within the apparatus for support or within tools. In such an instance, in as much as coupling with fluids provides lower sensitivity than coupling that is rigidly done on the bone, it can still be used to much effect (Mirabile, 124). Furthermore, extensive methods of the processing of signals that yield situations of red/ green light are very tedious and need a lot of studies to be concluded. The differences in the steps of fracture in different substances ought to be studied via laboratory experiments. Stiffer substances can produce larger emissions rendering the detection of damages in bones that are not healthy very unreliable (Mirabile, 200). Works Cited Ansell, Hilary. Design & technology. Dunstable, Beds, England: Belair Pub., 2003. Print, 312, 413 Davis, Rick. Design & technology. New ed. London: Letts Educational, 2005. Print, 377, 411, 418 JOLLY, W. D.. The application of accoustic emission to in-process inspection of welds. Ft. Belvoir: Defense Technical Information Center, 1970. Print, 78, 90 James, Jay B.. An accoustic emission investigation of the ductile to brittle transition in molybdenum. N/A: N/A, 1985. Print, 345, 365, 400 McMillan, David, and Mark Leishman. Design technology. Edinburgh: Leckie & Leckie, 2011. Print, 24, 26, 31 Mirabile, M.. Accoustic emission: Past experience within ECSC contracts and future trends: survey report. Luxembourg: Commission of the European Communities, 1983. Print, 78, 88 Scruby, C. B.. The Origin of accoustic emission during deformation of aluminium and an aluminium-magnesium alloy. N/A: N/A, 1980. Print, 124, 200 Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Acoustic emission Essay Example | Topics and Well Written Essays - 1750 words - 1”, n.d.)
Acoustic emission Essay Example | Topics and Well Written Essays - 1750 words - 1. Retrieved from https://studentshare.org/design-technology/1659002-acoustic-emission
(Acoustic Emission Essay Example | Topics and Well Written Essays - 1750 Words - 1)
Acoustic Emission Essay Example | Topics and Well Written Essays - 1750 Words - 1. https://studentshare.org/design-technology/1659002-acoustic-emission.
“Acoustic Emission Essay Example | Topics and Well Written Essays - 1750 Words - 1”, n.d. https://studentshare.org/design-technology/1659002-acoustic-emission.
  • Cited: 0 times

CHECK THESE SAMPLES OF Acoustic Emission Refers to the Waves of the Ultrasound and Sound

Room Acoustics and Reverberation Time

Reverberation time (RT60 or T60) on the other hand refers to the time taken for the intensity of produced sound to reduce by 60 dB from its original level.... Room Acoustics (Insert name) (Institution) (Course) (Date) Room Acoustics Introduction Room Acoustics refers to how sound behaves in an enclosed space; more specifically, in a room.... People have the general perception that the speakers in our stereo or home theatre systems are the final sound link in the whole sound chain....
11 Pages (2750 words) Essay

A History of Ultrasound Physics and the Properties of the Transducer

This loss in power of the ultrasound pulse is known as the attenuation.... As more life-scaled applications were realized for ultrasound and echo detection, it did indeed wind its way into the medical world as a therapeutic technology rather than diagnosis, initially, making use of the property of ultrasound to heat and damage disruptive animal tissue.... Its connection to a screen can form a very clear image which is clinical to non-invasive diagnosis techniques (NDT Resource Center) Relevant Formulas: Attenuation of an ultrasound pulse: the ultrasound is a wave like any other wave, hence it also suffers from the reduction in power as it moves in space....
3 Pages (750 words) Research Paper

Acoustic Emission and Vibration

4 Pages (1000 words) Essay

Acoustical Characterization of Porous Materials for Automotive Application

It is the viscous losses that results in the conversion of energy to heat while sound waves navigate through the fibers or pores that are interconnected in the material.... A porous material that is bonded with a barrier that is non-porous conducts the sound energy in waves that are in form of structure-borne.... This review mainly concerns itself with the acoustic characteristics of porous materials in various automotive applications.... The porous materials in question include; artificial and natural fiber, porous material and polymer foams… Acoustical Characterization of Porous Materials for Automotive Application: A Review Abstract This review mainly concerns itself with the acoustic characteristics of porous materials in various automotive applications....
7 Pages (1750 words) Research Paper

The Physics of Ultrasound

This same, simple principle of analyzing the different internal organs of the body based on the various densities of each tissue, as well as the ease of use of the sonogram machine in performing scans are able to contribute to the success of the ultrasound and its continued use until now (Gibbs 1).... This is similar to how a stone creates a disturbance when dropped into a still body of water, and while the water itself does not move, the waves on the surface of the water create ripples that move away from where the stone was originally dropped (Hoskins 4)....
8 Pages (2000 words) Research Paper

Empirical Model for Predicting the Sound Absorption of Polyfelt Fibrous Materials

A New Empirical Model for Predicting the sound Absorption of Polyfelt Fibrous Materials for Acoustical Applications I.... To that effect, engineers can obtain the absorption coefficient of sound at normal incidence by using the equation below: ZR = P0 * C0 (1 + C1 ((P0f)/r)-c2) The final model which comes as a derivative of the first model is Zt = (ZR + iZl)[coth(a + iB) * l] Zt = ZIR + iZIl Qunli [6] later extended this work to cover a wider range of flow resistivity values by considering porous plastic open-cell foams....
4 Pages (1000 words) Article

How the Distance from the Midpoint of a Snare Affect the Frequency Its Sound

Sound frequency refers to the passing rate of waves at a given point.... The vibration of a sound source creates compression waves of sound.... It is stated that the frequencies of the waves must be such that they can be detected by the ears.... However, whenever the source's velocity is the same or faster than the wave's speed, the source becomes the leads the waves produced.... Sound speed is mainly dependent on the medium the waves are traveling through....
13 Pages (3250 words) Research Proposal

Risks associated with ultrasound procedure

Tjie essay "Risks associated with ultrasound procedure" concerns the phenomenon of ultrasound and its impact.... Reportedly, ultrasound is the mechanical transmission of energy all the way through a medium at a frequency above the upper limit of human hearing.... obstetric sonography) application of medical ultrasound, therapeutic ultrasound predates diagnostic medical ultrasound by at least two decades with the earliest investigation of focused therapeutic ultrasound reported over 60 years ago; study of lesion formation in ex vivo beef liver and in situ brain of cats and dogs)....
7 Pages (1750 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us