StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Material Science: Road Tires - Research Paper Example

Cite this document
Summary
Name: Institution: Course: Date: Material Science: Road Tires The road tire is the outer fitting of the wheel; the part that comes into contact with the ground in motor vehicles and similar machines. In vehicles, bicycles, airplanes and similar machines, the road tires essentially bear the total load of the machine…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.9% of users find it useful
Material Science: Road Tires
Read Text Preview

Extract of sample "Material Science: Road Tires"

Download file to see previous pages

Road wheels are designed to operate in a variety of environments as they run on dry, muddy, and water-logged paths. The tires are also designed to run on smooth and rough terrains. The material that is used for making road tires should hence be elastic, wear resistant, durable, strong, and resistant to oxidation and corrosion. This paper discusses the materials and processes used in the making of road tires. In the manufacture of tires, numerous materials are assembled together, built around a metallic drum, then cured and heat under pressure.

The various components used in the manufacture of road tires include; rubber, black carbon, and chemicals and a steel wire combined and cured under high pressure. Natural rubber is obtained from rubber tree is used mainly in the manufacture of the rubber part that is exposed to the surface; this is because it is considered durable and does not wear out easily due to its flexibility and elasticity properties. It also has high abrasion effects and can withstand both high and low heat (Dhir 264).

Natural rubber is preferred as it is easily obtainable from rubber growing countries like Liberia and other European countries. It has close substitutes; synthetic rubber such as Stirene-butadiene co-polymer (SBR), and Polybutadiene . However, synthetic rubber is not preferred because it does not acquire heat first as compared to natural rubber with high heat building properties necessary in the manufacture of tires. The process of polymerization used in the manufacture of Stirene-butadiene co-polymer (SBR), and Polybutadiene is less preferred since it is expensive in terms of the cost involve (Lim 85).

Black rubber component is also one of the materials used in the manufacture of tire. The component is normally obtainable from combustion of oil and natural gas in limited amount of oxygen. This component is normally added to give the rubber its black color. This material is normally used since it gives an abrasive effect to the rubber and to offer reinforcement to the rubber. The carbon black is also preferred since it is a good conductor of heat. It therefore conducts excess heat from the tires thereby increasing the durability of the tires.

Fumed silica is considered as substitute for the black carbon due to the fact that they have low rolling loss; however, it is not always used since it has very low abrasive effect, and is not economical in terms of cost as was observed by (National Petroleum News 123). Black carbon is also easily obtainable. The tires is also composed of the Beads made of steel with high tensile properties within the rubber. The steel is coated with other materials like bronze and brass to protect it from rust.

The steel lining is meant to make the tires firm by increasing it strength (Jazar 11). Steel is mainly preferred to other metals since it is strong and is composed of alloy of iron and zinc with abundant supply. Titanium is however considered as best substitute for steel since it can withstand high temperatures, strong and highly elastic, but it has the disadvantage that it is expensive in terms of cost. It’s also not easily available and therefore this makes engineers prefer the steel to titanium (Sweeney 34) The body ply is another component of the tire.

It is mainly manufactured using fabrics like rayon, nylon, polyester, and Kevlar between two layers of rubber. The fabric material is used to reinforce the tire system and make it

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Material Science: Road Tires Research Paper Example | Topics and Well Written Essays - 1000 words”, n.d.)
Material Science: Road Tires Research Paper Example | Topics and Well Written Essays - 1000 words. Retrieved from https://studentshare.org/engineering-and-construction/1440020-mechanical-engineering-material-science
(Material Science: Road Tires Research Paper Example | Topics and Well Written Essays - 1000 Words)
Material Science: Road Tires Research Paper Example | Topics and Well Written Essays - 1000 Words. https://studentshare.org/engineering-and-construction/1440020-mechanical-engineering-material-science.
“Material Science: Road Tires Research Paper Example | Topics and Well Written Essays - 1000 Words”, n.d. https://studentshare.org/engineering-and-construction/1440020-mechanical-engineering-material-science.
  • Cited: 0 times

CHECK THESE SAMPLES OF Material Science: Road Tires

Science and Materials for construction and the built Enviroment

science and Materials for construction and the built Environment Assessment No.... hellip; These combination of metals that is when mixed together, attain more specific material value, which they did not have separately.... “Steel has many properties that make it a useful and essential building material.... It is used as a conductor of electricity and heat, a building material, and as a constituent element in various metal mixtures....
12 Pages (3000 words) Essay

Properties of Materials

material Properties 2 2.... Composite Materials 7 Properties of Materials (#496720) material Properties 1.... Density- Density is defined as the ratio of mass to volume of material.... Storage tanks and other structures operating in a corrosive environment would prefer the use of stainless steel material of density 8200kg/m^3.... In an engineering design the maximum allowable stress for a particular material is predefined and is a function of its yield strength....
8 Pages (2000 words) Assignment

Bridges as a Very Integral Part of the Transportation System

The next stage is the selection of the bridges, there are several types of bridges and they differ on many basis which can be material, span and inter-span relation, geometry of members and bridge, maximum loading and its patterns and lastly and most importantly the form of superstructures.... Then the material used for the construction of these types of bridges also determines the type of on site activities and requirements.... As shown in the figure Arch bridges are curved structures which have very high resistance to bending moments, this is achieved when the material is compressed under load, as a result the columns become thin compression members and transfer these compression forces into the abutments and foundations....
16 Pages (4000 words) Essay

Run Flat Tyres

According to John & James (2000) in addition to comfort tires also play a vital role as far as the ease of handling and general safety of a… Overtime there have been so many car tire manufacturers who have tried to develop that comfortable tire that meets the requirements of a car owner but this has been a very big challenge since tires are always subjected to different roads and For any car to perfectly work then it entirely depend on; how large the air chamber between the rim and the tire is, the pressure that the tire can support and the strength quality of the tire....
14 Pages (3500 words) Assignment

Automotive Coil Spring

The coil spring also maintains the suspension system at a certain height that is already predetermined and supports the added weight in the automotive without excessive sagging that could cause damage to the car or the tires.... Coil springs absorb most of the shock that comes from the tire impacts from the road surface.... For example, when the front wheel of a vehicle strikes a road irregular road surface and moves upward, the coil spring compresses and absorbs energy during the movement....
10 Pages (2500 words) Assignment

Glass Foot Bridges

Glass fibers can extend the life of a bridge from 50 years to 200 years says John Scalzi, who directs the National science Foundation's (NSF) large structural and building system program.... "Glass Foot Bridges" paper argues that the structural design of the footbridge needs to keep in mind the vibration analysis of the bridge....
6 Pages (1500 words) Case Study

Metallurgy and Manufacturing

METALLURGY AND MANUFACTURING Metallurgy today is an applied science.... Its fascination lies in the challenge of using science to give mankind the best engineering materials that the laws of nature and the Earth's natural resources will allow.... The applied science of metallurgy links the science of metals to the metal industries.... ENGINEERING REQUIREMENTS OF MATERIALS Engineering requirements of material mean what is expected of from the material so that the same can be successfully used for making engineering components such a crankshaft, spanner, etc....
11 Pages (2750 words) Coursework

Sources Analysis on Rubberized Concrete

Currently, most concrete manufacturing companies are using the technology of adding rubber constituents to make strong rubberized concrete because of the technology has proven feasibility due to large piles of tires that ends up in the landfills.... In Australia, millions of tires reach their useful life every year.... … Rubberized ConcretesLiterature Review Concrete is a common structural material used in the construction industries.... The use of Rubberized ConcretesLiterature Review Concrete is a common structural material used in the construction industries....
13 Pages (3250 words) Assignment
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us