engineering - Coursework Example

Only on StudentShare

Extract of sample
engineering

Identify the problem. 2. Find the best solution quickly. 3. Carry out the solution. 4. Get a routine follow-up afterwards. 5. Make sure to check with your doctor occasionally. 1.4: (30 words) First I would completely clean and clear off the workspace. After that, I would lay out all the necessary materials, including the layout above everything and then start my assembly. 1.5: (125 words) Risk assessment in the engineering workshop includes making sure that everything is in place properly before and after work is begun. Hazards may be minimized by ensuring that all elements (whether they be electrical or chemical in nature) are handled appropriately, using proper PPE techniques, precautionary measures, and any other preemptive measures in order to prevent unnecessary injury or damage to property. In order to improve the safety of the workplace in the PPE environment, it is a good idea to make sure that the handling of all materials are in accordance with health regulations as dictated by the region in which one is living. There may also be various local ordinances one may have to be aware of, so that is important to note. 1.6: (125 words) Cleanliness. The workspace should always be clean and neat. It is a bad idea to even think of accidentally mixing chemicals, which could either explode or give off toxic gases. In a PPE environment that is well-maintained, that is much less likely to happen. ...
Download paper

Summary

Merits and Distinctions: Engineering Problems Tasks - Part 1 1.1: (30 words) Protective eyewear is necessary when soldering at all times to protect eyes. Source: Courtesy of Google Images, 2011. Personal Protective Equipment (PPE) laboratories are necessary in order to ensure the safe handling of chemicals…
Author : fhowe

Related Essays

Finance Analysis of Jones Limited(small, specialist marine engineering company based in Aberdeen)
Payback period for the investment of £250,000 needed to generate the earnings of £125,000
...
9 pages (2259 words) Coursework
Marketing analysis - industries, trends and competition
(Charles, 100) Some of the services offered by contractors are professional services that have been traditionally offered by A/E consultants for a long time. A/E consultants, faced with contractors taking away a large slice of the professional service pie, must defend their market shares, and expand their service base. This expansion will require A/H consultants to add new non-traditional services specifically tailored to the front end and back ends of M. Charles. Congress Approves New Design/Build Law. (Civil Engineering 2006) Pg100. the project cycles. Services in these segments include...
5 pages (1255 words) Thesis
Marketing analysis for Construction Forensic
Hence, we see that the construction industry has taken over a number of services that were offered by A/E consultants. The contractors have taken over a large share of the service market of A/E consultants and thus, A/E firms need to expand the services offered to retain their market shares. They need to venture into service segments such as providing financial assistance to the clients, assistance with regulations, cost analysis of project life cycle, O&M functions, and renovation services. The situation has changed dramatically for marketing professionals and construction services providers...
15 pages (3765 words) Thesis
engineering materials
As a result, the negative mobile electrons keep the positive ions close together and thereby make material harder to break. Q2. Glasses generally possess low tensile strength as they are amorphous solid. To illustrate, the molecules of the glass do not constitute any specific internal structure. These molecules are arranged disorderly and do not hold to one another very strongly. In addition, glass is very similar to a slowly moving liquid so that old pieces of glass seem thicker at the bottom than at the top. In order to increase the tensile strength of the glass, the molecules must keep very...
3 pages (753 words) Coursework
TBM case
ence we are able to determine total production per unit as follows: Product (Valves) Explanation Cost Manufacturing overhead (4.39% X 4) 17.548 Materials   $16 Direct labor based on run labor (16% X 0.25) 4 Total standard cost   $38 Pumps     Manufacturing overhead (4.39% X 8) 35.096 Materials   $20 Direct labor based on run labor (16 X 0.50) 8 Total standard cost   $63 Flow Controllers     Direct labor based on run labor (16 X 0.40) 6.4 Materials   $22 Manufacturing overhead (4.39% X 6.4) 28.0768 Total standard cost   $56 2. No change Contribution margin = Sales - variable cost...
4 pages (1004 words) Case Study
Accounts Report for JT Engineering
Net profit margin, on the other hand analyzes the profitability of the company before deducting the taxation and finance charges from the earningsThe statement of financial position tells the shareholder above the financial outlook of a company and the status of the assets and liabilities. Statement of financial position is usually divided into three parts, Assets, Liabilities and Shareholder equity. Assets are further divided into non-current assets and current assets whereas liabilities are divided in to non-current and current as well. Usually a company which has higher assets base and...
2 pages (502 words) Essay
Got a tricky question? Receive an answer from students like you! Try us!