StudentShare solutions
Triangle menu

Engine Management Systems - Coursework Example

Nobody downloaded yet

Extract of sample
Engine Management Systems

The FADEC controls the fuel injection and timing; hence, optimize engine power. This adds the considerable amount of wiring to the system due to the needed separate power supply for backup from the alternator. The extra weight of parts of FADEC system has to be checked and recalculated for adjustment. FADEC has cockpit controls and other extra switches added to this system to control the fuel pump. These systems are protected by the FADEC power supply (Gunston, 1990)). The ECU has a 3D memory map, which controls fuel injection under varied circumstances for instance, air pressure density and the air temperature, with respect to throttle settings and the RPM. The Electronic Control Unit can sense barometric pressure and respond by injecting fuel. The spark plug ignition timing is controlled depending on load for each throttle settings. The ignition timing variations yields faster engine starting and smoother operations with the variable loads. The FADEC engine does not need chocking during starting since the ECU controls fuel for every cylinder and assists in retarding the ignition. FADEC system does not use the carburetor and the ignition and does not also depend on aircraft electrical system (Guttman, 2009). On the other hand, in the hydromechanical control system, the driver is in control of the aircraft power plant using an internal combustion engine. The sensors and control are the alternator and the battery masters. The battery master activates the battery contractor that connects the battery to the electrical bus aircraft. Alternator master applies power to the field circuit of the alternator to activate the circuit. The two switches provide power to the aircraft systems. The throttle sets up the required power level and controls the massive air-flow rate in the carbureted engines that are delivered to the cylinder. Pitch control adjust the speed unit, which then adjusts the propeller pitch and controls the load required by the engine in maintaining the RPM. The mixture control will in turn set the needed fuel to add to the airflow intake. At high altitudes, the oxygen levels reduce and, therefore, volume of the fuel must readjust to the required air-fuel mixture. The ignition switch opens the ‘P’’lead circuit by activating the magnetos. The magnetron maintains the process of sending the output voltage to spark plugs and connects the engine through the gearing. Movement in the crankshaft causes the magnetrons to generate voltage for sparking (Hispano-Suiza, 2001). TASK 2: FADEC SYSTEM The FADEC system is connected to inputs and outputs as illustrated in the diagram 01 Diagram 01: INPUT AND OUTPUTS OF A FADEC FADEC system is the most current system used to control the aircraft engines. The computers form part of its components and have the ability to process more data than the hydromechanical control system. This, therefore. enables the FADEC to optimize the operation of the engine system, as well performs other functions. This includes fuel control, power management, Sourcing data for ECM controlling of thrust reverser, shutting down, detecting of faults for the system, monitoring all components of the engine, as well as sourcing data to be used for engine indication. In order to achieve these tasks, the FADEC has various components. These components include Electronic Engine Control (EEC) and the auxiliary components. These auxiliary components include the sensors, ignition systems the stator valves, the actuator controller, FADEC Alternator, the Reverser ...Show more

Summary

Response to Task: Engine Management Systems Name Institution TASK 1: Engine management system The two types of electronic engine management system used in the modern aircraft are the Full Authority Digital Electronic control system (FADEC) and the hydro mechanically controls system…
Author : kimveum
Engine Management Systems essay example
Read Text Preview
Save Your Time for More Important Things
Let us write or edit the coursework on your topic
"Engine Management Systems"
with a personal 20% discount.
Grab the best paper

Check these samples - they also fit your topic

Information Systems Management & Quality

NHS Computer System Worth £12 billion for Bexley Hospital turned out to be “unfit“ for the purpose and had to be replaced. The basis for saying it was unfit was partly the fact that only “160 health organizations out of 9,000 utilized the patients’ records, according to Michael Savage (2010).

18 pages (3750 words) Coursework
Gas turbine engine basics
Turbojets with converging-diverging nozzle (Sherwin, Keith & Michael, Horsley, 1996) There is an upstream rotating compressor that is coupled to a downstream turbine, and a combustion chamber in-between, and the accelerated gases moving through the engine nozzle is used to provide thrust, which drives the aircraft.
8 pages (2000 words) Coursework
Aircraft Fuel System
17 Task1: Engine Management Systems Describe the two types of electronic engine management systems that can be found on modern aircraft General Description of Supervisory Engine Management Supervisory engine management was developed along with the advent of computer technology with a view to reduce the cognitive load of pilots and to extend the engine life (Nagabhushana and Sudha 187).
7 pages (1750 words) Coursework
Management Information Systems
In fact, Laudon and Laudon (2007) indicate that it is not only required for the creation of successful organisations but in the addition of value as well as in the provision of products and services to one of the most important stakeholders – customers.
4 pages (1000 words) Coursework
Gas turbine engine basics
Under these conditions, the constant k is unity. Therefore, F=ma The turboprop propulsion system consists of a core engine and a propeller. The general principles in
8 pages (2000 words) Coursework
Aircraft fuel system
er which obtains information on the various engine operating parameters and acts upon a hydro-mechanical fuel control system within a limited authority whereby limiting actions, such as TGT limiting, torque limiting in turboprop engines and combustor pressure limiting during
7 pages (1750 words) Coursework
Technology Considerations for PT6 Engine Overhaul Facility
The engine overhaul process is an involving task that requires many aspects to be covered. One of the primary concerns is the technology that would be used to ease the process. Several systems and software can be employed to achieve this task. One of the systems that could be employed is the interactive maintenance manual.
6 pages (1500 words) Coursework
Strategic Management and Information Systems
Strategic management is an art and science that formulates, implements, and evaluates cross-functional decisions so that an organization effectively achieves its objectives. Strategic managers
20 pages (5000 words) Coursework
Information Systems in Business
The information we can get from the web is the time in which every crew member is on duty, the weather conditions in the sea and the type of food available in the onboard (lecture week 7, slide 5). ii) The type of decision applications support that can
2 pages (500 words) Coursework
Information System and Enterprise Systems
The decision is based on a culmination of numerous factors. The most important factor is the cost of the information system. Organizations are required to operate efficiently. This means that they ought to maximize
1 pages (250 words) Coursework
Hire a pro to write
a paper under your requirements!
Win a special DISCOUNT!
Put in your e-mail and click the button with your lucky finger
Your email
YOUR PRIZE:
Apply my DISCOUNT
Comments (0)
Click to create a comment
Contact Us