It carries about 300-550 passengers and has a range of about 17500km. The aircraft was designed after extensive consultation with eight airlines to replace the aging aircraft variants that were present in the market at the time such as those mentioned here above. It acted as the bridge between the Boeing 767 and the Boeing 747 in terms of aircraft offerings. The original version was the 200 version which was followed in 1997 by the 200 ER (extended range) and then the stretched 300 version in 1998 which is about 10 meters longer than the original 200 series. The 300ER long range variant was introduced in 2004 followed closely by the 200LR in 2006. From then Boeing has introduced other versions of the Triple Seven including a freighter together with other versions e.g. the Boeing 787. There are three engine offerings available for the 777 including the General Electric GE90, Rolls Royse Trent 800 and the Pratt and Whitney PW4000. This aircraft is one of the best selling fuel efficient commercial airliner capable of flying more than half way around the world. Motivation From the 1970s Boeing had continually unveiled new models to replace and expand its fleet. The need for more capacity and range capability motivated the company to come up with a new long range aircraft that could replace the old Airbus A330, the McDonnell Douglas DC-10 and the Lockheed L1001. Several variants including the 777 tri-jet had been programmed for production before their production was cancelled. The main motivation was to build a reliable, fuel efficient, both long and short range capability and increased passenger capacity. Developments in technology had influenced industry players to bring up the fly by wire design and the Boeing 777 provided the perfect opportunity. It was the first aircraft to adopt the technology. History The developments in technology over the years had influenced players in the aviation industry to expand their fleet with more efficient aircrafts which could be effective in the expanded global market. These developments saw movements with major airlines calling for more range, capacity and fuel efficiency. Boeing Commercial Airlines reacted to this market demand by engaging ten world class airlines to come up with the solution to these deficiencies. In the 1970s Boeing had introduced several models among its fleet such as the twin engine 757 which was to replace the 727, the twin engine 767 to compete the Airbus A300 and the 777 tri-jet (which was later abandoned) challenging the DC-10 and the Lockheed Tri-Star. In the 1980s there was a big gap at Boeing product line where the 767-300ER and the 747-400 that could not adequately achieve the required potential of size and range. The other airlines e.g. Airbus also had old aircraft among their fleet that called for replacement. Airbus had in the meantime moved to fill this gap by developing the A330 and A340. At Boeing, several proposals were being mooted to enlarge the 767 with the result of the 767-X. It had a capacity of 340 passengers and a range of 13500 km. It was however un-impressive to the company as it did not meet the requirements such as short to intercontinental range capability, flexible cabin configuration and low operating cost. This resulted in the 777. Boeing Commercia
Boeing 777 – Research Paper Name of student Course Instructor Date due Introducing an airplane Introduction The Boeing 777 which is commonly referred to as the Triple Seven in aviation parlance is one of the largest twin engine jet transport currently in service in most nations around the globe…
Based on the discussion, Boeing management makes decisions. Boeing Airplane Company uses relevant financial information for its decision making activities. The company uses reliable financial information to scrutinize entry into the very large commercial transport or VLCT unit market segment. Indeed, Boeing must implement the profitable VLCT production and marketing strategies.
Therefore, under this two types of planes there various sub-divisions of different make-up and functionality of planes. As a child, I remember I never missed an opportunity to see or get into an airplane. In addition, I was very lucky because my family was able to board planes to visit various places and different countries for a vacation.
Nurses who are able to use research to inform their practice may enhance the professional status of nursing, and advance nursing knowledge. Much preparation and patience, however, are required, paying attention to factors that facilitate the adoption of desired practices.
Reasons of failure of this goal in spite of adopting different techniques have been explained. And finally a model, SIOP, has been designed in order to educate teachers about different ways of teaching to English learner student, thus making sure student's over all progress.
The histories and account of the first plane was included as it is a relevant point to convey the evolution of modern planes and their different application.
One of the most significant inventions of man is the airplanes. The surmise of the World Wars was the measurement of how powerful a nation, but one of their gauging powers is the competence of their air force justified by their high powered military and war planes.
ad to face criticism and opposition in and outside Government, while doctors were not keen as they were afraid of losing money and professional freedom both. They were financially losing, would have less private patients and patients would not be allowed to choose their doctors,
In this demonstration of the manufacture of stealth aircraft, the process is detailed and thus need to be clearly followed. A paper which is glossed is used. With the glossy side of the paper up, it is divided into eight