A comparative study of the use of replacement pile foundations versus displacement pile foundations - Assignment Example

Only on StudentShare

Extract of sample
A comparative study of the use of replacement pile foundations versus displacement pile foundations

The intention of this study are pile foundations as the structural parts that are involved with carrying and transferring the structural loads to the ground at a depth that is below the surface of the ground. The pile foundation mainly consists of the piles and the pile caps. Piles are long members that are also slender and carry out the function of transferring the loads to deep soils which have high load bearing capacities. Piles are mainly constructed using concrete, wood and steel. They are classified according to various standards which are dependent on the type of soil, material used to construct the pile and the characteristics of the piles to transmit loads. Piles are fixed to the ground through such processes as drilling, jacking, or driving them to connect to the pile caps. In basic point of view terms, piles can be broadly classified into two groups; displacement piles or driven piles and replacement or bored piles. Displacement piles are formed prior to being fixed to the ground through whatever mechanism, be it driving, jacking, screwing or hammering to the ground. Replacement piles are formed after a hole is dug into the ground in which the pile is formed. There are various other modes of classifying piles such as the mode of the load bearing material capacity. This paper will however focus on the replacement vs. the displacement piles. A comparative study of the use of these two types of piles will be given ...
Download paper


This paper explores the use of pile foundations in the construction industry. It defines and identifies different classifications of piles and their applications. This paper seeks to make a comparison between replacement and displacement pile foundations. …
Author : kaialeuschke

Related Essays

Constructing a motorway (civil engineering project)
This essay discusses that a motorway can be defined roughly as a main road or highway, with two or more lanes on opposite direction, and where fast motor traffic occurs. A motorway has to be well constructed with all the required plans, materials and skilful engineering needed to provide a long-lasting use for motorists. As the Junior Site Manager of a 30-mile motorway, my job is to provide the plan and the necessary activities to have a smooth flow of construction, maintenance and completing of this motorway. But before going on an analysis of the construction parameters, I deemed it...
11 pages (2761 words) Essay
Ultimate axial bearing capacity of jacked pile in layered sand with using Driven Program 1.0
The experiments are performed on three different water tables from dry level, cross-surface level and to the bottom of the 15m depth. Four different depths of steel and concrete piles are used for the experiment which is performed with the help of computing software Driven 1.2 providing all supposed calculation. Different depths of the surface are varying from medium sand to coarse sand with fine gravel. 8 tests were conducted for each of four piles making a series of tests manifesting the behaviors and measures of ultimate axial bearing capacity over the standards. A comparison of results...
60 pages (15060 words) Dissertation
Design a multi-story reinforced concrete office building
The building is to consist of a 30 people meeting suite/conference, a restaurant, different sizes common room on the 3 floors of the building. Ground floor will consist of, conference room, restaurant, common room and all services associated. The remaining unused floor is aimed for facilities of leisure. 3.0 General Approach The general approach taken is to obtain the architecture of an office building:- Acquiring design of an office architecture of a multi-storey building basically adopted in the construction design (Alheyad, 2008). . Structural system establishment of the floors from the...
22 pages (5522 words) Essay
Sustainable Drainage Systems and Piles
Firstly it would be Infiltration trenches and the second will be Detention Basins. Infiltration trenches This is a system in which a trench is made and filled with artificial layers of granular material/aggregates which are clean and dry and then this is used in combination with geotextile. These granular materials have voids which are used to trap water and retain it for some time. Where as geotextile material prevents from clogging and durability. The Granular material should be 50 mm clear stones. Then the materials are layered in the manner shown below. There are some conditions for its...
8 pages (2008 words) Essay
Historical premises in Southampton City
The main goal of this development is to eliminate carbon (IV) oxide and reduce energy consumption. Additional existing units, three historical buildings on the site are to be retained and completely refurbished for their historical importance. Suitable Forms of Construction for Development Foundation of a building should be proportional to an interface soil at a given stress level, and to acceptable limits of settlements. Settlement analysis is important in building foundation because when neglected can cause failure or collapse in structural members (Bowles, J. E. 1997). Uncontrolled...
4 pages (1004 words) Book Report/Review
Sheet Pile Design.
The latter is caused by earth pressures reaching the limiting state on both side of a considered retaining structure, which thereafter moves towards the excavated area until the full-zone failure is reached. As movement can occur on the bottom part of the wall, the analysis of the structure will be taken as a free body. Thus there will be modified free earth support method (The free earth support revised method) and fixed earth support method. It is worth mentioning that both methods have assumed that active stress condition have been fully developed behind the retaining wall while the passive...
8 pages (2008 words) Coursework
(i) Conduct a literature review and summarize the historical development of the equations used for the design of cfa piles in gr
It is highly important to note that the estimated static CFA capacity is achieved through methods that are developed for specific objects such as drilled shafts and driven piles, mainly because the behavior of CFA piles’ load-settlement are same. During the installation process, there is the establishment of end bearing and side shear resistance with pile displacement has similar features with other kinds of deep foundations (O'Conner & Robertson, 1997). During the process, total axial comprehension resistance of located CFA pile is attained via calculation of both the end bearing and side...
6 pages (1506 words) Literature review
Got a tricky question? Receive an answer from students like you! Try us!