StudentShare solutions

# Electrical and Electronic principles - Lab Report Example

## Summary

For the resistor both voltage and current are in same phase thus VR drawn on the same axis as current. In inductor voltage leads current by 90 degrees…
Author : luzwest
Save Your Time for More Important Things
Let us write or edit the lab report on your topic
"Electrical and Electronic principles"
with a personal 20% discount.
Grab the best paper

### Check these samples - they also fit your topic

Electronic stethoscope
The Stethoscope is an auditory medical appliance for listening to internal resonance in human body which is referred to, in medical language, as auscultation. Heart sound vibration is one of the most essential ways to judge the condition of the cardiac function.
10 pages (2500 words) Lab Report
Frequency Response of Netwroks (Electronic Engineering)
The apparatus used were as follows; patch-board, farnell low frequency (LF) oscillator, oscilloscope (CD 1400 including 1 off CX1 449), digital voltmeter and digital frequency meter. Procedure The LF oscillator was connected in series of a capacitor and a resistor and the voltage across and current through the capacitor measured at frequencies between 1 kHz and 10 kHz.
3 pages (750 words) Lab Report
Newton's Three Laws, Friction and Electrical Circutes
Newton's First Laws is intuitive and can be seen directly at work in our daily life. For the first case, an example would be a soccer ball which will not be going anywhere unless someone kicks it or carries it. On the second case, consider a ball rolling with a constant velocity.
9 pages (2250 words) Lab Report
ELECTRONIC PACKAGING AND ASSEMBLY
The package consists of an extended area which is used for the connections to be made between various components. The area can be one lead or a layer of lead. The
7 pages (1750 words) Lab Report
Frequency Response of Netwroks (Electronic Engineering)
The LF oscillator was connected in series of a capacitor and a resistor and the voltage across and current through the capacitor measured at frequencies between 1 kHz and 10 kHz. Current was determined by
3 pages (750 words) Lab Report
Sensors and Control Systems (Electrical and Electronic Engineering)
Combination transducers have both functions; they both detect and create action. E.g. an ultrasonic transducer switches back and forth many times a second
12 pages (3000 words) Lab Report
Electrical circuits
Investigations performed on the course look at amplitude and phase relationships that exist between current and voltage. It did for sinusoidal driving sources on the input of designed circuit. In
15 pages (3750 words) Lab Report
Electrical and Electronic principles
By the end of this lab, you should be able to analyse circuit behaviour when DC or AC voltages are applied to the circuits. You are required to record all activities (observations, results and comments) in your logbook as you
2 pages (500 words) Lab Report
Electronic Laboratory Practise
In addition, each measurement was accompanied with accuracy measurements to account for deviations from expected values. “Resistors in series have the same current flowing
2 pages (500 words) Lab Report
Analog electronic
The experiment was aimed at confirming this by building and testing various op-amp circuits that make use of negative feedback. The circuits are mainly built of the operational amplifier integrated circuit, and forward and feedback
3 pages (750 words) Lab Report
Hire a pro to write