How to Build a Deck and Common Problems in Building Decks - Assignment Example

Building a deck is one of the best improvements you can make for your house. Depending on the material you use, a deck can be an inviting warm place to host parties, outdoor cooking, watch your kids as they play or just a good resting place for your pets. Many real estate agents will tell you that clients value houses that have well-placed decks. Having a deck does not require high technology or expertise. Many people are able to do this by following simple instructions. You can actually design, plan and do the masonry and carpentry and see your house turn into something new.

Having a good deck actually raises the value of your house. Before doing any modification to your house, it is usually safer to check with the local building inspectors to find out if you need a building permit for this. Doing this will save you embarrassment and money if you have to demolish the deck just because you did not adhere to the rules of your area. It is advisable to visit their offices to get details of what is expected and if there are any inspections that will be done by the officials.

Since this deck will be a permanent structure that will hold human life, the government has a right to ensure that it is rightly done and that is why the building inspectors are there. The inspectors may have specified rules in terms of size, design, materials and even how deep you can dig the foundation. It is therefore important to get these permits and the inspectors to approve your intended construction. The inspectors will probably ask you for a deck plan, so you need to be ready for this.

There are places where permits are not really required. If you do not need the permit, then do not go looking for one. However, you will need to be aware of the building codes in your area to ensure you are adhering to them. This manual discusses decks and incorporates images and illustrations for easier understanding. A deck plan consists of the design of the deck with scale drawings of its size of it.

Start out by determining where you want the deck to be. Take the measurements of the area putting into consideration permanent structures or plants that cannot be removed. For example, if you have a big palm tree in front of your house that you do not want to remove, you will be forced to adjust your measurements and design to accommodate the tree and at the same time ensure safety. Have a sketch of the design you want. Also, have enough space to accommodate that design. Now, when you have the space and the design, it is time to put the design on paper.

Using your sketch, do the ground measurements. At this point, just record them as you measure. You will determine the scale once all the measurements have been done. When you have all the sections measured, work out a scale.