This paper considers the metal powder bed additive manufacturing (AM) methods, mainly SLM and the EBM. This analysis will take into considerations the applications of each method, its advantages, and disadvantages. Eventually, a comparison between the two will be made in summary…
The paper tells that the method of selective laser sintering was carried out first by use of nylon combined with polymers when a need arose to have assistance of audio-visual prototypes and the fit-to-form research tests that were previously conducted. This process received considerable research and as a result, it was further expanded to incorporate metals and subsequently got into alloys that were used in the production of functional prototypes and also in the process of developing rapid tooling procedures. The past practices have seen the status of SLS reconsidered based on rapid prototyping approaches, SLM with the use of phosphorous during the binding mechanism, post-processing that involved parts that were laser-sintered, metals that have undergone direct selective laser sintering, rapid tooling application, and consideration of materials that have been put to use. Substantial research has thus been done in this area and many publications made. This could be attributed to the usefulness of the technology, its commercial viability, and the kind of broad application that it has found. The technology also has evolved to include the Electron Beam Melting, which is a technology that incorporates building parts laying layer-by-layer by use of metal powder through application of powerful beams of electron. Initially, powder-based AM manufacturing processes did construct various layers made up of plastic and metallic materials that dispersed powders on a given set substrate. These were liquid based processes. AM is also based on the same principle but curing is done by the UV light. The advancements in these technologies have made the AM be of greater use in many industries including fabrications, biomedical, and repairs of metallic forms of components since they have the capacity to deposit metal matter on set substrates (Kruth, et al., 2003, pp.357–371). 2.0 Introduction There has been a considerable increment in new and sophisticated technologies in only a span of 20 years. These sophisticated technologies and the innovations have been able to produce some complex and freeform solids (Shiomi, et al., 1999, pp.237–252). Besides, the different additive or subtractive techniques are evolving quite fast into rapid manufacturing processes in the cases of mass-customized goods, which have taken a deviation from the rapid prototyping processes (Mercelis & Kruth, 2006, pp.254–265). The intermitted measurements of those components that have been fabricated through the process of additive manufacturing (AM) have the capacity to boost the in-process improvement as well as change the characterization related to the internal geometrics of materials. These AM processes do take into account the planar layer. The layer-upon-layer aspect of various processes involving AM techniques has the ability to incorporate very simple measurements of two-dimensional nature (Mercelis & Kruth, 2006, pp.254–265). This is attributed to the fact that the current layer of the parts used is focused on a continuous basis when it comes ...
Cite this document
(“Metal powder bed additive manufacturing (AM) methods Essay”, n.d.)
Retrieved from https://studentshare.net/design-technology/3795-metal-powder-bed-additive-manufacturing-am-methods
(Metal Powder Bed Additive Manufacturing (AM) Methods Essay)
“Metal Powder Bed Additive Manufacturing (AM) Methods Essay”, n.d. https://studentshare.net/design-technology/3795-metal-powder-bed-additive-manufacturing-am-methods.
X-Ray Powder Diffraction. X-Ray powder diffraction is used widely in geological studies for the purpose of identifying the composition of minerals present in different rock formations. This provides a quicker method of identifying crystalline structures when compared to optical light microscopy or scanning electron microscopy.
Concerns related to heavy metals are due to the chemical properties of the metals rather than their density. Metals which are known as heavy metals are cadmium, lead, zinc, arsenic, mercury, chromium, silver, iron, platinum and copper. These metals occur as natural constituents of the crust of the earth and since they cannot be destroyed or degraded, they are persistent environmental constituents.
Concept laser is a branch of the Hoffman Innovation Group company that is a plastic processing company that has a significant injection mold-making expertise. Therefore the company has an extensive experience in the utilization of SLM for the manufacture and production of injection molds and tooling.
According to the postulates of Michael Porter’s better off test, a company must employ corporate strategies which are likely to make it more competitive within the business environment. It is notable that the company has been able to achieve competitiveness both within its own business units and the home merchandise retail business environment.
They therefore had this facility as their home. It had teachers who, among the normal classroom lessons, also taught them how to make a living through such ways as hunting. Characters Jeremy Reeds, nicknamed Powder, is the main character of this story. This character has supernatural powers.
2) Food Colours Colours are added to foods to enhance their visual properties Colouring foods is considered as a deceptive practice to mislead the consumers mainly children. Colours are permitted under strict control of justification by the producer who should make out a case that he adds the colour only to replace what has been lost in processing like canning or heat treatment, to get consistency of colour and for the sake of visual appeal.
Aquatic Metal toxicity depends upon particular water sample's chemical composition such as dissolved organic carbon, oxygen various other elements. Formations of organic and inorganic metal complexes are highly dependent upon the ambient water chemistry (Sunda and Guillard 1976).
The author states that a metal drum corrodes since it is exposed to the factors that are favorable for corrosion. Since the problem has already occurred, there are various remedies that could be used in controlling the situation. Welding would be an option to eradicate the cracks and leaking places.
ging, transport, or storage of such food results, or may reasonably expected to result, in it or its by-products becoming directly or indirectly a component of such food” (RoyalSocietyOfChemistry, 2013, p. 2)
Colours are added to foods to enhance their visual properties
n utilized by the highest number of people across the world due to its ability to give a wide search platform for various information, and as a socialization tool through social networking among other activities. According to Miller and Brewer (40), in mid 2001 almost 60% of
9 Pages(2250 words)Essay
GOT A TRICKY QUESTION? RECEIVE AN ANSWER FROM STUDENTS LIKE YOU!
Let us find you another Essay on topic Metal powder bed additive manufacturing (AM) methods for FREE!