The stored water can be used for irrigation, and also fighting fire.But for the Forest Hills Metropolitan District Storage Pond Development, the new storage ponds would be used for “Water Augmentation purposes (releasing water from the ponds back into the Bear Creek watershed for use by water users downstream with senior in the event of a forest fire. It is however important that the basic procedure in the construction of a pond is followed so that the owner can come up with a top quality pond that is easy to maintain (Hyde & Perry 5). The first step in this process is finding a good location for the pond. This process is more important than the actual pond construction. Most sites are unsuitable for pond construction and whether the construction is inch perfect or not, the pond will fail if the site is not good enough. It is therefore important to analyze the safety of the area, topography, geological makeup, features of the drainage area and the water holding ability of the soil in that particular area. Pond safety When planning for a pond, do not ignore the chances of the pond failing and in addition to the damage that can be caused by the rapidly released water. It is therefore important to locate the pond in an area where such a failure cannot cause damage to infrastructure or risk the lives of people or livestock. If it has to be in such an area, it is important to seek the services of an engineer who can come up with a design that is safe and fail proof. The site should not have any underground cables or pipelines as they can be broken or cause injury during excavation. This should also be the case to areas with electricity lines crossing above as they could be caught by a fishing line if they hang low. Water bodies attract different sorts of people from children to adults, this applies to ponds as well. It is therefore important to make the pond safe for activities like fishing. The pond owner should have any stumps removed so that boat riders should not have any trouble when having fun in the pond (Hyde & Perry 7). Soils in the Pond The texture of soil can vary depending of the depth and might change strongly over a short distance. For the site to be appropriate for a pond, the soil has to be able to hold water. The soil layer should be thick in order to prevent excessive leaks, clay soil is recommended for pond construction since their texture is good and even better when it is a mixture of sand and clay. Sands with course textures do not hold water and are not recommended. A mixture of sand and gravel is even worse. In case a part of the pond has poor soil, it can be made impervious by adding betonies clay, this is however an expensive affair and it is advisable that an alternative pond site is chosen (Hyde & Perry 10).The profile of the soil beneath the damn should be studied as well because if it is not impervious, the water can seep away in the long run and therefore the foundation of the pond should be sealed using impervious soil to make seepage impossible. Geology Building a pond in areas with limestone deposits is risky since the area might have invisible crevices which could make the pond to leak, such areas even have granular soils which leak even when wet. Such sites should have a thorough investigation done of them so that it is certain that they can hold water. Topography The cost of construction of a pond mainly depend on the lay of the land since if a pond with a high storage volume is needed, the site should have a low earth fill so that excavation work does not cost too much. A site with two ridges towering over either sides is good since it allows a large area to be flooded with ease. These areas also reduce the chances of some areas of the pond having shallow water. Excavated ponds are
A pond constructed well in a good location makes a good addition to the landscape within which it is constructed. A pond can be of various uses to the owner other than storing the water, it can be used recreational activities like viewing wildlife and even fishing…
A medical record is a comprehensive report that lists all the data that is created or acquired during a person’s course through a healthcare facility. It records details of any treatment plans of present or past, medical reports, tests, diseases, illnesses, medical checkups, etc. that a person has had in his life.
According to the paper load management techniques deal with proper and sustainable supply of power service. The demand for the power service varies across time periods. When most customers use electricity the demand for the power source remains very high and at the time when the demand is less most of the customers do not use the power. There are lots of advantages and disadvantages of the increasing use of the power source.
This research tells that practical storage management is all about assessing the online storage system and ensuring that all the entire process of storing data, information in documents, folders and files are well protected and reliable. The process of practical data storage is very complex and involves a lot of activities and operations such as data organization, device concept, data management and tools among others.
Thermal storage systems are important in the heating and cooling industry. The systems can be installed almost anywhere in a residential or business setting. There are many different types of thermal storage systems. These systems are common in the heating and cooling industry.
The author states that there are a number of approaches to reduce the product development growth time. The organizations form their approaches which may be strategic, systematic and synergistic. This is very important as the increasing competition is leading the firms to develop their products in a lesser time than their competitors.
icipate in various writing contests due to which, their writing skills are polished and they are given a chance to see the capacity of their writing expertise. The website encourages showing the writers’ their creativity and writing expertise. The writers are not required to
Quantitative analysis includes designs, techniques, and measures that offer discrete numerical or quantifiable data. This research design uses probability sampling to ensure representativeness of the sample. Some of the research designs which may be categorized as quantitative research are experimental designs and casual comparative research.
Electric field is produced by stationary electrical charges while the magnetic field is as a result of moving electrical charges (Hauss and Melcher 20). The particular way in which charges and electrical