Steel Design - Research Proposal Example

Extract of sample
Steel Design

Prepare an illustrated design appraisal indicating two distinct and viable structural steel solutions for the building and its foundations and floors. Identify clearly the functional framing, the load transfer and stability aspects of each scheme. Identify the solution you recommend giving reasons for your choice.
...
Download paper

Related Essays

Design Project in UK
The location of the project is taken to be on the Victoria Street much before joining the Temple Way on the Northern side of the road....
8 pages (2008 words) Assignment
Book Storage Design
Although full-size shelving is originally preferred, yet full-size shelving should be minimized as per the reader benefit scheme. In case of full size shelving suitable retractable ladders to be provided....
9 pages (2259 words) Research Proposal
Structural Steel Design
It is important to understand that the failure of bolt is the characteristics of the minimum residual stresses of the bolt material. During an exercise, consistent stresses were derived for ordinary black, and turned and fitted bolts upon their respective failure. As per Peter (1950) experimentation, "the yield point of thread, however in the case of the black bolts was approximately 30 percent, which is lower than yield point obtained for turned and fitted bolts". It is important to specify that in all the failures the damage initiated from the root of the thread, however there were instances...
10 pages (2510 words) Essay
Finite Element Analysis of a Pedestrian Steel Arch Bridge
What is steel? ...
38 pages (9538 words) Dissertation
RC design
The design recommendations for RC beam-column and base tag on a strength-based advance that the connection shave strength is tartan against the expected force demands imposed by neighboring members. These recommendations, the joint is tacit to behave adequately during earthquakes if its shear strength exceeds the shear demand. The strong column and weak beam method is ensured and enough crossways reinforcement and anchorage extent for reinforcing bars transitory through the connections. The least amount and greatest spacing of joint transverse reinforcement are based on the requirements for...
5 pages (1255 words) Research Paper
Got a tricky question? Receive an answer from students like you! Try us!