Deflection of a Loaded Cantilever - Math Problem Example

Summary

1) There is very little difference between the theoretical and the measured results. There is good agreement in the theoretical and measured results though in all cases the measured results are more than the theoretical results.
2) The difference in theoretical and measured results can be due to the following reasons: a) The LVDT or DTI used to measure the deflection may not be 100% accurate, b) there are human errors while measurement, c) the surrounding temperature also causes the changes in the readings.
…

Download full paper File format: .doc, available for editing

GRAB THE BEST PAPER97.7% of users find it useful

Read Text Preview

Subject: Science
Type: Math Problem
Level: Masters
Pages: 4 (1000 words)
Downloads: 2
Author: yhansen

Extract of sample "Deflection of a Loaded Cantilever"

Download file to see previous pages

3) To improve the agreement between the theoretical and measured value following care should be taken : a) LVDT or DTI instrument should accurate and it should be kept at proper place, b) readings should be taken more carefully, c) the measure may be taken in air conditioned lab so as to keep the environmental effects to minimum. Test No.Load (N)Deflection at pt. B (0.001")1002520310404156052081625101730120Test No.Load (N) at pt. CMaximum strainMinimum strain at pt. Aat pt. A10002577.13-14.14310150.74-35.75415225.74-60.48520361.44-95.45625436.32-117.33730452.02-124.03Test No.Load (N)Theoretical Deflection y at pt. B (0.001")100251731031415515206862585730102Test No.Load (N) at pt.

CTheoreticalTheoreticalMaximum strainMi

...Download file to see next pages Read More

Cite this document

APA
MLA
CHICAGO

(“Deflection of a Loaded Cantilever Math Problem Example | Topics and Well Written Essays - 1000 words”, n.d.)
Deflection of a Loaded Cantilever Math Problem Example | Topics and Well Written Essays - 1000 words. Retrieved from https://studentshare.org/science/1504757-deflection-of-a-loaded-cantilever

(Deflection of a Loaded Cantilever Math Problem Example | Topics and Well Written Essays - 1000 Words)
Deflection of a Loaded Cantilever Math Problem Example | Topics and Well Written Essays - 1000 Words. https://studentshare.org/science/1504757-deflection-of-a-loaded-cantilever.

“Deflection of a Loaded Cantilever Math Problem Example | Topics and Well Written Essays - 1000 Words”, n.d. https://studentshare.org/science/1504757-deflection-of-a-loaded-cantilever.

Cited: 0 times

CHECK THESE SAMPLES OF Deflection of a Loaded Cantilever

Architecture of the Modernist Period

On the example of MVRDV-WoZoCo, Amsterdam architecture theories on modernism in architecture are considered further on.... There is the following outline of the paper: The modern context of… It is desirable to create and design such kind of buildings, where ergonomic concerns, social ideas, economic and architectural needs of the contemporaries are reflected in the innovative buildings....

8 Pages (2000 words) Essay

Tip Deflection of a Cantilever Beam

The objective of this experiment was to determine the tip deflections of I and T section cantilever beams when subjected to increasing point loads and relate the values obtained with the theoretical values. A mass of 0.... kg was loaded at the tip of each beam and the deflection… The procedure was repeated by adding a mass of 0.... kg up to 4 kg and each deflection recorded. From the experiment, the experimental values for deflection are higher than the theoretical values....

5 Pages (1250 words) Coursework

Atomic force microscopy

As the tip moves over the surface, the deflection of the cantilever generated is fed to a DC amplifier system, which verifies it and tries to much it with the desired.... This tip is attached to the free end of a The material to be scanned is placed below the tip, as the tip moves across the surface it is attracted or repelled by different forces, the atomic deflection from rest is recorded and an imaging software is used to process the results....

5 Pages (1250 words) Lab Report

Photoelastic Methods

It involved applying the photoelastic techniques, and testing the cantilever beam.... The aim was to use the cantilever beam to help understand the fringe by relating to the magnitude of strain.... As often the case, the cantilever beam is always coated at one end using a photostress plastic and clamped to the table's or bench's edge.... The study sought to compare theoretical values with measured values of the beam deflection....

5 Pages (1250 words) Assignment

Metal-Insulator-Semiconductor Contacts, and Spin Coating

The author of the paper examines metal-semiconductor contacts, metal-insulator-semiconductor contacts, basic principles of transistors, organic thin film transistors, fabrication and characterization of pentacene thin film transistors, and atomic force microscopy.... nbsp;… AFM has been used to analyze van der Waals forces, repulsive forces, lateral friction forces and magnetic forces (Albrecht, 1988)....

12 Pages (3000 words) Assignment

Scanning Tunnelling Microscopy

This paper “Scanning Tunnelling Microscopy” looks at the various techniques in use and being researched in order to provide a sustainable framework for data storage at the atomic scale.... The use of atomic-scale observations to augment data storage is only bound to increase as time proceeds....

14 Pages (3500 words) Research Paper

Single-Molecule Force Spectroscopy

Thirdly, when one termini of protein sticks to the cantilever strongly, it will be unfolded mechanically upon cantilever retraction.... … @ 2009High-throughput single-molecule force spectroscopy and DNA: A Programmable Force Sensor for membrane proteinsIntroductionSingle-molecule force spectroscopy is majorly useful in solving the low efficiency in information acquisition during the @ 2009High-throughput single-molecule force spectroscopy and DNA: A Programmable Force Sensor for membrane proteinsIntroductionSingle-molecule force spectroscopy is majorly useful in solving the low efficiency in information acquisition during the measuring of the forces....

11 Pages (2750 words) Essay